LCPRO SHARKi Manuel utilisateur

SHARKi

IP66 BEAM Movinglight

User Manual

V1.1

Table of contents

1. SAFETY INSTRUCTIONS..........................................................................................................................................1

2. PRODUCT INTRODUCTIONS...................................................................................................................................3

2.1 DIMENSIONS .............................................................................................................................................................3

2.2 FIXTURE OVERVIEW .................................................................................................................................................4

2.3 ACCESSORIES ...........................................................................................................................................................4

3. PACKING AND SHIPPING.........................................................................................................................................5

3.1 PROTECTION LOCK.............................................................................................................................................5

3.2 UNPACKING ..........................................................................................................................................................5

3.3 PACKING AFTER USE ................................................................................................................................................5

4. INSTALLATION ................................................................................................................................................................6

4.1 CLAMPS INSTALLATION ...................................................................................................................................6

4.2 DEVICE INSTALLATION .....................................................................................................................................6

4.3 LAMP FITTING AND ADJUSTMENT ............................................................................................................................7

5. POWER / CONTROL CONNECTION .................................................................................................................................8

5.1 POWER CONNECTION ................................................................................................................................................8

5.2 CONTROL CONNECTION...................................................................................................................................8

5.3 TESTING.................................................................................................................................................................8

6. CONTROL PANEL ............................................................................................................................................................9

6.1 PANEL INSTRUCTION ................................................................................................................................................9

7. TECHNICAL SPECIFICATION ..........................................................................................................................................10

8. GOBOS AND COLORS.............................................................................................................................................12

8.1 GOBOS..................................................................................................................................................................12

8.2 COLORS................................................................................................................................................................12

9. MENU STRUCTURE .................................................................................................................................................13

10. DMX PROTOCOL ....................................................................................................................................................16

11. SYSTEM WIRING DIAGRAM ...............................................................................................................................18

12. MAINTENANCE AND TROUBLESHOOTING....................................................................................................19

12.1 CLEANING AND MAINTENANCE.................................................................................................................19

12.2 TROUBLESHOOTING......................................................................................................................................19

1.Safetyinstructions

Beforeusingtheﬁxture,readthelatestversionoftheproductusermanual,payingparticularattentionto

thesafetyinstructions.

The manufacture of this ﬁxture, are not responsible for damages, resulting from misuse of this

ﬁxture,duetothedisregardoftheinformationprintedinthisusermanual.

DANGER!

Hazardousvoltage.Riskoﬂethalorsevereelectricshock

WARNING!

Wearprotectiveeyewear.Neverlookdirectlyintothelightsource.

WARNING!

Burnhazard.Hotsurface.Donottouch.

Onlytodirectmountingonnon-combustiblesurfaces.

Minimumdistancetolightedobjects.

Replaceallcrackedglassshields.

Maximumambienttemperature.

Maximumtempoftheexternalsurface.

General guidelines

lThis product has a protection rating of IP66.

lNever open this ﬁxture while in use.

lThe ﬁxture should be kept clean. DO NOT operate the ﬁxture in extreme heat or dusty environments. Avoid contact

with chemical liquid.

lMinimum distance to lighted objects must be 49.21feet (15m).

lMaximum temp of the external surface 194˚F (90˚C).

lMaximum ambient temperature 113˚F (45˚C).

lMinimum distance of inﬂammable materials from the surface 1.6 feet (0.5m).

lLamp should be changed if damaged or distorted in shape due to extreme heat.

lCover, prism or LCD Menu Function Display with visible damages such as cracks or scratches must be replaced to

ensure performance of the ﬁxture.

lDisconnect the ﬁxture from power before changing any parts or accessories.

lBasic insulation should be maintained between the controllable device and the product power supply.

lMake sure that the installation area can hold a minimum point load of 10 times the weight of all installed

ﬁxtures, clamps, cables, auxiliary equipment, etc. Check that the cover, clamps and locks are undamaged. Certiﬁed

safety cables must always be used when installing the ﬁxture.

lThe ﬁxture is only intended for installation, operation and maintenance by qualiﬁed professional. Instructions stated in

the manual must be complied.

lThe ﬁxture must be kept in a well-ventilated place at least 50 cm away from any wall surface. Check if the fans or

ventilation openings are unblocked.

lThis ﬁxture uses discharge lamp. To avoid reducing the lamp’s life, wait at least 15 minutes after powering oﬀ to allow

the unit to cool down before handling.

lBroken or damaged cables and light source can only be ﬁxed or changed by certiﬁed technicians, certiﬁed local

distributors or the manufacturer to ensure operational safety.

lDo not stick ﬁlters or other materials onto the lens. Do not modify the ﬁxture or install other manufactured parts.

2. Production instructions

2.1 Dimensions

2.2 Fixture overview

2.3 Accessories

Item Qty Unit Remark

User Manual 1 Pc --

Clamps 2 Set Hanging integrated folding lamp, Load weight 200KG

Safety cable 1 Pc Φ5*60cm 7*19 pc with hook Material：Steel

5-pins signal line 1 Set --

Power cable 1 Set 1.5*2.5mm2

3. Packing and shipping

3.1 Protection lock

Pan and tilt locks are equipped to ensure safe transportation.

PAN: 4 lock positions are located evenly on the Pan.

3.2 Unpacking

Notes

All products are quality controlled and checked for any faults before they are dispatched to customers. If the ﬁxture is

damaged during delivery, the customer must notify the shipper and manufacturer to ﬁle a damage insurance claim.

Photographic evidence of the damage must be provided.

Flight-Case：Open the cover of the ﬂight-case and remove the plastic packing bags. Hold the handles of the ﬁxture ﬁrmly

and take it out carefully.

Cardboard box：Open the box and take out the whole set of packaging foam which contains both the ﬁxture and its

accessories. Remove the foam from the top, put away the accessories, and then take out the ﬁxture wrapped in the plastic

bag.

Notes

Check if the pan and tilt are unlocked before connecting the ﬁxture to power.

3.3 Packing after use

1. Switch oﬀ the ﬁxture and wait for at least 5 minutes before disconnecting it from AC power. Cool down the ﬁxture for

at least 15 minutes before packing.

2. Lock pan and tilt.

3. Flight case: Wrap the ﬁxture in plastic bags. Hold it by the handles, and then carefully place it inside the ﬂight case

along with all the accessories. Close the cover. Only 3 layers are allowed when piling up the ﬂight cases. Do not upside

down.

4. Cardboard box: Wrap the ﬁxture in plastic bags. Put it in the packaging foam along with all the accessories. Place the

other set of packaging foam on top then carefully put it inside the cardboard box.

水平保

护锁

P a n l o c k

4. Installation

4.1 Clamps installation

The ﬁxture can be placed on the stage or mounted on the truss facing any direction. Attach the clamps to the mounting

position on the base of the ﬁxture.

Warning：Use two clamps when mounting the ﬁxture. Turn the screws attached to each clamp a 1/4 turn clockwise to lock.

Always remember to use the safety cable which goes through the mounting hole on the base. Do not attach the safety cable

on the handle.

4.2 Device installation

1. Make sure there is no damage on the clamps or safety cables before installation.

2. The clamp is mounted on the chassis of the ﬁxture. Horizontally insert the clamp into the mounting holes of the chassis.

Fasten the clamp tightly by a 1/4 turn clockwise. Fix another clamp in the same way.

3. Check if pan is unlocked before connecting the unit to AC power.

4.3 Lamp ﬁtting and adjustment

1. Disconnect the ﬁxture from AC power. Cool down the ﬁxture. Set the Tilt lock in a horizontal position.

2. Remove the lamp holder lower cover and plug out the waterproof terminal when disassemble the bulb, then loosen the

ﬁxed plate and take out the bulb.

3. Put the bulb into the ﬁxed plate, then press the bulb clockwise with the ﬁxed plate when install the bulb, observe the bulb

spot and adjust it after lighted the bulb. Finally, plug in the waterproof fan and lamp holder lower cover.

Note

The ﬁxture is equipped with PHILIPS MSD Platinum Flex 300S, which is featured with high eﬃciency and short-arc

characteristic, such as a stable 7200K color-temperature and average lifespan of 6000h.

Note

1. Fitting another type of lamp will cause potential damage to the ﬁxture. Change the lamp before it reaches its lifespan.

Read the guidelines in the package carefully when ﬁxing the lamp.

2. To avoid any impact on the beam, do not touch the bulb with your bare hands. The lamp must be kept clean with the use

of the clean paper contained in its package

Push the light bulb to the

hole，press it down

Enlarged

Remove the back

Back cover

5. Power/ Control connection

5.1 Power connection

Connection method:

ŸL (Live) Brown wire

ŸE (Earth) Yellow / Green bi-color wire

ŸN (Neutral) Blue wire

ŸThe voltage and frequency of the power source must be in compliance with the ones marked on the ﬁxture. It is

strongly recommended that each ﬁxture are to be connected to the power source separately so that they can be

switched on / oﬀ individually.

5.2 Control connection

The ﬁxture has 5-pin XLR connectors for DMX data input and output as shown below. Connection between the console and

ﬁxture, and between ﬁxtures must be made with 2 core screened DMX signal cable. Maximum connecting distance of

signal cable is 150 meters. Additional DMX512 signal-ampliﬁer is recommended for longer distance

Connect the Console’s DMX OUTPUT to the ﬁrst ﬁxture’s DMX INPUT, then the ﬁrst ﬁxture’s DMX OUTPUT to

the second ﬁxture’s DMX INPUT and so on. It is recommended not to connect more than 32 units on a single

DMX universe. On the last ﬁxture’s output connect a DMX terminator. (The terminator is a 5-pin XLR connector

with a 1/4W and 120Ωresistor between the pin 2 and pin 3) as shown below:

5.3 Testing

Connect the ﬁxture to AC power. Check if the lamp is on and the ﬁxture is independently controllable before

putting into operation.

Table des matières

Autres manuels LCPRO Équipement d'éclairage

LCPRO

LCPRO SHOW.STROBE MK2 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur