Lantronix Xport pro Guide de configuration rapide

Part Number 900-557

Revision E September 2011

Integration Guide

XPort Pro Integration Guide 2

transmitted or reproduced in any form or by any means without the written permission

of Lantronix. Printed in the United States of America.

XPort Pro is a trademark of Lantronix.

Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of

The Open Group. Windows 95, Windows 98, Windows 2000, Windows NT, and

Windows XP are trademarks of Microsoft Corp.

Contacts

Lantronix Corporate Headquarters

167 Technology Drive

Irvine, CA 92618, USA

Phone: 949-453-3990

Fax: 949-450-7249

Technical Support

Online: www.lantronix.com/support

Email/Chat: www.lantronix.com/support

Sales Offices

For a current list of our domestic and international sales offices go to the Lantronix

web site at www.lantronix.com/about/contact/.

Disclaimer and Revisions

Operation of this equipment in a residential area is likely to cause interference, in

which case the user, at his or her own expense, will be required to take whatever

measures may be required to correct the interference.

Note: This product has been designed to comply with the limits for a Class B digital

device pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy, and if not

installed and used in accordance with this guide, may cause harmful interference to

radio communications.

Changes or modifications to this device not explicitly approved by Lantronix will void

the user's authority to operate this device.

Note: With the purchase of XPort Pro, the OEM agrees to an OEM firmware license

agreement that grants the OEM a non-exclusive, royalty-free firmware license to use

and distribute the binary firmware image provided, only to the extent necessary to

use the XPort Pro hardware. For further details, please see the XPort Pro OEM

firmware license agreement.

Date

Rev.

Comments

September 2009

Initial Draft

December 2010

Updated Lantronix address/contact information.

March 2011

Updated SDRAM number information.

April 2011

Updated part number information.

September 2011

Updated compliance information.

XPort Pro Integration Guide 3

Contents

Contacts........................................................................................................................2

Disclaimer and Revisions.............................................................................................2

List of Figures...............................................................................................................4

List of Tables ................................................................................................................ 4

1. Introduction 5

About the Integration Guide..........................................................................................5

Additional Documentation.............................................................................................5

2. Description and Specifications 6

The XPort Pro Features................................................................................................6

XPort Pro Block Diagram..............................................................................................7

PCB Interface ...............................................................................................................7

Ethernet Interface.........................................................................................................9

LEDs.............................................................................................................................9

Dimensions.................................................................................................................10

Recommended PCB Layout.......................................................................................11

Product Information Label ..........................................................................................12

Electrical Specifications..............................................................................................12

Functional Specifications............................................................................................13

A: XPort Pro 485 Connection Diagram 14

B: Compliance Information 15

C: Warranty 17

XPort Pro Integration Guide 4

List of Figures

Figure 2-1. Side View of the XPort Pro ..................................................................................................7

Figure 2-2. XPort Pro Block Diagram.....................................................................................................7

Figure 2-3. XPort Pro LEDs....................................................................................................................9

Figure 2-4. Front View..........................................................................................................................10

Figure 2-5. Bottom View.......................................................................................................................10

Figure 2-6. Side View ...........................................................................................................................10

Figure 2-7. PCB Layout........................................................................................................................11

Figure 2-8. Product Label.....................................................................................................................12

List of Tables

Table 2-1. PCB Interface Signals...........................................................................................................8

Table 2-2. Ethernet Interface Signals (Industry Standards)...................................................................9

Table 2-3. Absolute Maximum Ratings ................................................................................................12

Table 2-4. Recommended Operating Conditions.................................................................................12

Table 2-5. Technical Specifications......................................................................................................13

XPort Pro Integration Guide 5

About the Integration Guide

This guide provides the information needed to integrate the XPort Pro™device

server into a customer printed circuit board. This manual is intended for engineers

responsible for integrating the XPort Pro into their product.

Note: This document covers XPort Pro™ Device Server versions XPP1002000-01R,

XPP100200S-01R, XPP1003000-01R, XPP100300S-01R, XPP1003000-02R and

XPP100300S-02R.

Additional Documentation

Visit the Lantronix web site at www.lantronix.com/support/documentation

for the

latest documentation and the following additional documentation.

Document

Description

XPort Pro User Guide Provides information needed to configure, use,

and update the XPort Pro firmware.

XPort Universal Demo

Board Quick Start Provides the steps for getting the XPort Pro up

and running.

XPort Universal Demo

Board User Guide Provides information needed to use the XPort

Pro on the demo board.

DeviceInstaller User

Guide Provides instructions for using the Windows-

based utility to configure the XPort Pro and other

Lantronix device servers.

Com Port Redirector User

Guide Provides information on using the Windows-

based utility to create a virtual com port.

XPort Pro Integration Guide 6

The XPort Pro is Lantronix’ most powerful, self-contained embedded networking

module. Footprint compatible with the popular XPort® and running either Linux or

Evolution OS™ operating systems, the XPort Pro eliminates the complexity of

designing network connectivity into a product and allows you to deploy advanced

applications on the edge device itself. The thumb-sized XPort Pro provides

everything you need in a single embedded solution. It effortlessly handles demanding

applications with the power of a high-speed, advanced architecture 32-bit processor.

And with ample built-in memory, it allows virtually unlimited flexibility for

customization and application enablement.

XPort Pro provides bullet-proof security by offering a variety of robust data encryption

and authentication options. What’s more, the option to run Linux, with IPv6 built in,

enables you to deploy custom applications and take advantage of the large feature

libraries available for Linux developers. XPort Pro also includes Lantronix’ patent

pending VIP (Virtual IP) Access™ technology, which allows for seamless integration

with the ManageLinx™ remote services enablement platform. Critical agency

certification has already been completed by Lantronix, reducing your test time and

speeding time-to-market.

The XPort Pro Features

The XPort Pro contains a 32-bit Freescale processor, with 8/16 Mbytes of SDRAM,

16 Mbytes of Flash and an integrated Broadcom 10/100 PHY.

The XPort Pro also contains the following:

3.3-volt serial interface

All I/O pins are 3.3V tolerant

Ethernet magnetics

Power supply filters

Reset circuit

+1.5V regulator

Crystals and Ethernet LEDs

The XPort Pro requires +3.3-volt power and is designed to operate in an extended

temperature range (see technical data).

2: Description and Specifications

XPort Pro Integration Guide 7

Figure 2-1. Side View of the XPort Pro

XPort Pro Block Diagram

The following drawing is a block diagram of the XPort Pro showing the relationships

of the components.

Figure 2-2. XPort Pro Block Diagram

PCB Interface

The XPort Pro has a serial port compatible with data rates up to 921600 bps. The

serial signals (pins 4–8) are 3.3V CMOS logic level. The serial interface pins include

+3.3V, ground, and reset. The serial signals connect to an internal UART driven at

3.3V. For applications requiring an external cable running with RS-232 or RS422/485

voltage levels, the XPort Pro must interface to a serial transceiver chip. We supply an

RS-232 transceiver on the XPort Universal Demo Board for this purpose.

Note: The standard baud rate of 460800 bps is not supported.

RJ45

CMOS IO

RESET

+3.3VDC

32-bit CPU

FLASH/SDRAM

MAGNETICS

LEDs

PHY

2: Description and Specifications

XPort Pro Integration Guide 8

Table 2-1. PCB Interface Signals

Signal Name

XPort

Pro Pin

Primary Function

GND

Circuit ground

3.3V

+3.3V power in

Reset

External reset in

Data Out

Serial data out (driven by built-in UART)

Data In

Serial data in (input to built-in UART)

CP1/RTS

(Configurable Pin 1) 6 CP1 can be configured as follows:

•Flow control: RTS (Request to Send) output driven

by the built-in UART for connection to CTS of attached

device.

•Programmable input/output: CP1 can be driven or

read through software control, independent of serial

port activity.

•RS485 Transmit Enable: In RS485 mode, CP1 is

driven by the built-in UART for connection to the

transmit enable pin of an RS485 Transceiver.

CP2/DTR

(Configurable Pin 2) 7 CP2 can be configured as follows:

•Modem control: DTR (Data Terminal Ready) output

driven by the built-in UART for connection to DCD of

attached device.

•Programmable input/output: CP2 can be driven or

read through software control, independent of serial

port activity.

CP3/CTS/DCD

(Configurable Pin 3) 8 CP3 can be configured as follows:

•Flow control: CTS (Clear to Send) input read by the

built-in UART for connection to RTS of attached

device.

•Modem control: DCD (Data Carrier Detect) input

read by the built-in UART for connection to DTR of

attached device.

•Programmable input/output: CP3 can be driven or

read through software control, independent of serial

port activity.

2: Description and Specifications

XPort Pro Integration Guide 9

Ethernet Interface

The Ethernet interface magnetics, RJ45 connector, and Ethernet status LEDs are all

in the device server shell. The XPort Pro PHY is Auto MDIX capable allowing

connection to either straight through or cross over Ethernet cables.

Table 2-2 Ethernet Interface Signals (Industry Standards)

Signal Name

DIR

Contact

Primary Function

TX+

Out

Differential Ethernet transmit data +

TX-

Out

Differential Ethernet transmit data -

RX+

Differential Ethernet receive data +

RX-

Differential Ethernet receive data -

Not used

Terminated

Not used

Terminated

Not used

Terminated

Not Used

Terminated

SHIELD

Chassis ground

LEDs

The XPort Pro contains the following LEDs:

Link (solid green, left LED)

Activity (blinking amber, right LED)

Figure 2-3. XPort Pro LEDs

2: Description and Specifications

XPort Pro Integration Guide 10

Dimensions

The XPort Pro dimensions are shown in the following drawings.

Figure 2-4. Front View

RIGHT

LED

18.25 [0.719]

16.25 [0.640]

11.55 [0.455]

7.15 [0.281]

CONTACT 1

CONTACT 8

5.85 [0.230]

14.50 [0.571] 4.03 [0.158]

13.50 [0.531]

1.85 [0.073]

3.25 [0.128]

3.30 [0.130]

1.27 [0.050]

0.40 [0.016]

FRONT

VIEW

DIMS = mm (in)

LEFT

LED

SHIELD TAB

TOLERANCE

.XX+/-0.20[0.008]

Figure 2-5. Bottom View

Figure 2-6. Side View

33.90 [1.335]

1.00 [0.039]

0.35 [0.014] 10.84 [0.427]

6.35 [0.250]

2.54 [0.100] 3.20 [0.126]

0.60 [0.024]

FRONT SHIELD

GROUND

INTERFACE

PINS

DIMS = mm (in)

11.90 [0.468]

SHIELD TAB

TOLERANCE

.XX+/-0.20[0.008]

Autres manuels pour xport pro

Table des matières

Autres manuels Lantronix Serveur

Lantronix

Lantronix MatchPort b/g Pro Manuel d'installation

Lantronix

Lantronix MSS1-T Manuel utilisateur

Lantronix

Lantronix MSS4-D Manuel utilisateur

Lantronix

Lantronix SLB Manuel utilisateur

Lantronix

Lantronix XPress DR Manuel utilisateur

Lantronix

Lantronix SLM Manuel utilisateur

Lantronix

Lantronix SDS1101 Manuel utilisateur

Lantronix

Lantronix MatchPort AR Guide de configuration rapide

Lantronix

Lantronix UDS2100 Manuel utilisateur

Lantronix

Lantronix EDS4100 Manuel utilisateur

Lantronix

Lantronix SGX 5150 Manuel utilisateur

Lantronix

Lantronix EDS-MD Series Manuel utilisateur

Lantronix

Lantronix xPico XPW100A003-01-B Guide de configuration rapide

Lantronix

Lantronix XPort Direct Guide de configuration rapide

Lantronix

Lantronix SLC8 Manuel utilisateur

Lantronix

Lantronix SecureBox SDS1100 Manuel utilisateur

Lantronix

Lantronix ETS Manuel utilisateur

Lantronix

Lantronix UDS1100 Manuel utilisateur

Lantronix

Lantronix SLC 8000 Manuel utilisateur

Lantronix

Lantronix SCS100 Manuel utilisateur

Lantronix

Lantronix SCSxx05 Manuel utilisateur

Lantronix

Lantronix xport pro Manuel utilisateur

Lantronix

Lantronix SCS Manuel utilisateur

Lantronix

Lantronix xDirect Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Lantronix xport pro Guide de configuration rapide

Manuels Serveur populaires d'autres marques