Lantech TPGS-0008CA Manuel utilisateur
T(P)GS-0008CA
8 10/100/1000T Unmanaged (PoE at/af) Ethernet Switch
T(P)ES-0008CA
8 10/100TX Unmanaged (PoE at/af) Ethernet Switch
T(P)GS-0006CA
6 10/100/1000T Unmanaged (PoE at/af) Ethernet Switch
T(P)ES-0006CA
6 10/100TX Unmanaged (PoE at/af) Ethernet Switch
User Manual
Aug 2021
Recommendation for Shielded network cables
STP cables have additional shielding material that is used to reduce external interference.
The shield also reduces the emission at any point in the path of the cable. Our
recommendation is to deploy an STP network cable in demanding electrical environments.
Examples of demanding indoor environments are where the network cable is located in
parallel with electrical mains supply cables or where large inductive loads such as motors
or contactors are in close vicinity to the camera or its cable. It is also mandatory to use an
STP cable where the power device (like IP camera) is used outdoors or where the network
cable is routed outdoors.
Important Notice
Lantech Communications Global, Inc. reserves the right to modify the
equipment, its specification or this manual without prior notice, in the interest
of improving performance, reliability, or servicing. At the time of publication
all data is correct for the operation of the equipment at the voltage and/or
temperature referred to. Performance data indicates typical values related to
the particular product.
No part of this documentation or information supplied may be divulged to any
third party without the express written consent of Lantech Communications
Global Inc. Products offered may contain software which is proprietary to
Lantech Communications Global Inc. The offer or supply of these products
and services does not include or infer any transfer of ownership.
Interference Issues
This Equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
commercial or industrial installation. This equipment generates, uses, and
can radiate radio frequency energy. It may cause harmful interference to
radio communications if the equipment is not installed and used in
accordance with the instructions.
FCC Warning
This Equipment has been tested and found to comply with the limits for a
Class-A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. It may cause harmful interference to radio
communications if the equipment is not installed and used in accordance
with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Mark Warning
This is a Class-A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
Content
Chapter 1 Introduction.............................................5
Chapter 2 Hardware Description ............................6
2.1 Physical Dimension........................................ 6
2.2 Package Content:......................................... 10
2.3 IP Protection................................................. 11
2.4 LED Indicators.............................................. 14
Chapter 3 Hardware Installation...........................15
5
Chapter 1 Introduction
Lantech T(P)GS/ T(P)ES-0008CA Series are 8 10/100/1000T or 10/100 Base-TX with
M12-connctor unmanaged industrial switches for IP41 or IP54 rated protection, which
meet the high reliability requirements demanded by industrial applications.
Lantech T(P)GS/ T(P)ES-0006CA Series are 6 10/100/1000T or 10/100 Base-TX with
M12-connctor unmanaged industrial switches for IP41 or IP54 rated protection.
For latest product specifications, please refer to Lantech official site.
6
Chapter 2 Hardware Description
In this paragraph, it will describe the Industrial switch’s hardware spec, port, cabling
information, and wiring installation.
2.1 Physical Dimension
T(P)GS-0008CA-54
Aluminum case. IP-54, 135mm(W)x165mm(H)x76.5mm(D)
T(P)GS-0008CA-41
Aluminum case. IP-41, 135mm(W)x165mm(H)x76mm(D)
7
T(P)ES-0008CA-54
Aluminum case. IP-54, 135mm(W)x165mm(H)x76.5mm(D)
T(P)ES-0008CA-41
Aluminum case. IP-41, 135mm(W)x165mm(H)x76mm(D)
8
T(P)GS-0006CA-54
Aluminum case. IP-54, 135mm(W)x165mm(H)x76.5mm(D)
9
T(P)GS-0006CA-41
Aluminum case. IP-41, 135mm(W)x165mm(H)x76mm(D)
T(P)ES-0006CA-54
Aluminum case. IP-54, 135mm(W)x165mm(H)x76.5mm(D)
Ce manuel convient aux modèles suivants
7
Table des matières
Autres manuels Lantech Routeur réseau
Lantech
Lantech TWMR-5002 Manuel utilisateur
Lantech
Lantech TGS-R6416XT Manuel utilisateur
Lantech
Lantech IMR-3002 Manuel utilisateur
Lantech
Lantech LGS-2624C Manuel utilisateur
Lantech
Lantech IWMR-3002 Manuel utilisateur
Lantech
Lantech TWAP-5004 Manuel utilisateur
Lantech
Lantech IMR-3002 Manuel utilisateur
Lantech
Lantech TWAP-5006 Manuel utilisateur
Lantech
Lantech IGS-0008B Manuel utilisateur
Lantech
Lantech IGS-6300-2P Manuel utilisateur
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité