Land Pride AFM4211 Manuel utilisateur

Table of Contents

Cover photo may show optional equipment

not supplied with standard unit.

Read the Operator’s manual entirely. When you

see this symbol, the subsequent instructions and

warnings are serious - follow without exception.

Your life and the lives of others depend on it!

315-507M

AFM4211

19628

Operator’s Manual

All Flex Grooming Mower

4/12/11

Table of Contents

AFM4211 All Flex Grooming Mower 315-507M 4/12/11

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the

preparationofthismanual,Land Prideassumes noresponsibilityforerrorsoromissions.Neitheris anyliabilityassumedfordamagesresultingfrom theuse

ofthe information containedherein. Land Pride reservesthe right toreviseand improveits productsas it sees fit.This publicationdescribesthestate of this

product at the time of its publication, and may not reflect the product in the future.

Land Pride is a registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

Table of Contents

Important Safety Information . . . . . . . . . . . . . 1

Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1

Look For The Safety Alert Symbol . . . . . . . . . . . . .1

Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 11

Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 11

Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Further Assistance . . . . . . . . . . . . . . . . . . . . . . . 11

Section 1: Assembly & Set-up . . . . . . . . . . . 12

Tractor Requirements . . . . . . . . . . . . . . . . . . . . . . 12

Torque Requirements . . . . . . . . . . . . . . . . . . . . . . 12

PTO To Drawbar Set-Up . . . . . . . . . . . . . . . . . . . . 12

Tractor Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Main Driveline Installation . . . . . . . . . . . . . . . . . . . 13

Hydraulic Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . 14

Pull Rope Hook-up . . . . . . . . . . . . . . . . . . . . . . . . 14

Gauge Wheel Assembly . . . . . . . . . . . . . . . . . . . . 14

Bleeding Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . 15

Section 2: Operating Instructions . . . . . . . . 16

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

U-Joint Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Constant Velocity Driveline Angle . . . . . . . . . . . . . 17

Pre-Operation Instructions . . . . . . . . . . . . . . . . . . 17

Operating Instructions . . . . . . . . . . . . . . . . . . . . . . 18

General Operating Instructions . . . . . . . . . . . . . . . 19

Section 3: Adjustments . . . . . . . . . . . . . . . . 20

Center Deck Height Adjustments . . . . . . . . . . . . . . 20

Belt Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Section 4: Accessories . . . . . . . . . . . . . . . . 22

Ball Swivel Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Cutting Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Low Lift Blades . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Medium Lift Blades . . . . . . . . . . . . . . . . . . . . . . . 22

High Lift Blades . . . . . . . . . . . . . . . . . . . . . . . . . 22

Mulching Blades . . . . . . . . . . . . . . . . . . . . . . . . . 22

Section 5: Maintenance & Lubrication . . . . . 23

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Servicing Mower Blades . . . . . . . . . . . . . . . . . . . . 23

Blade Inspection . . . . . . . . . . . . . . . . . . . . . . . . .23

Blade Removal And Installation . . . . . . . . . . . . .24

Blade Sharpening . . . . . . . . . . . . . . . . . . . . . . . .25

Blade Options: . . . . . . . . . . . . . . . . . . . . . . . . . .25

V-Belt Installation . . . . . . . . . . . . . . . . . . . . . . . .25

Driveline Protection . . . . . . . . . . . . . . . . . . . . . . . .26

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Tires With Air Pressure . . . . . . . . . . . . . . . . . . . . .27

Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Driveline Constant Velocity Shaft . . . . . . . . . . . .28

Driveline Shafts . . . . . . . . . . . . . . . . . . . . . . . . . 28

Inner Tube of Driveline . . . . . . . . . . . . . . . . . . . .28

Wheel Support Bushings . . . . . . . . . . . . . . . . . .29

Wheel Bushings (Gauge Wheels) . . . . . . . . . . . .29

Wheel Bushings (Transport Hubs) . . . . . . . . . . .29

Blade Spindle Bearings, Center Deck . . . . . . . . .29

Blade Spindle Bearings, Wing Decks . . . . . . . . .29

Tool Bar To Floating Link Pivot Pin . . . . . . . . . .29

4-Way Gearbox . . . . . . . . . . . . . . . . . . . . . . . . .30

Mower Deck Gearbox . . . . . . . . . . . . . . . . . . . . .30

Transport Locks . . . . . . . . . . . . . . . . . . . . . . . . .31

Wing Deck Pivot Bushings . . . . . . . . . . . . . . . . .31

Rear Deck Pivot Half Clamps . . . . . . . . . . . . . . .31

Wing Flex Pivot Lugs . . . . . . . . . . . . . . . . . . . . .31

Section 6: Specifications & Capacities . . . . 32

Section 7: Features & Benefits . . . . . . . . . . . 34

Section 8: Troubleshooting . . . . . . . . . . . . . 35

Section 9: Torque & Tire Inflation Charts . . . 37

Section 10: Warranty . . . . . . . . . . . . . . . . . . . 39

Important Safety Information

4/12/11 AFM4211 All Flex Grooming Mower 315-507M

Land Pride Table of Contents

▲

Important Safety Information

These are common practices that may or may not be applicable to the products described in

this manual.

Safety at All Times

Thoroughly read and understand

the instructions given in this

manual before operation. Refer to

the “Safety Label” section, read

all instructions noted on them.

Do not allow anyone to operate

this equipment who has not fully

read and comprehended this

manual and who has not been

properly trained in the safe

operation of the equipment.

▲Operator should be familiar with

all functions of the unit.

▲Operate implement from the

driver’s seat only.

▲Make sure all guards and shields

are in place and secured before

operating implement.

▲Do not leave tractor or implement

unattended with engine running.

▲Dismounting from a moving

tractor could cause serious injury

or death.

▲Do not allow anyone to stand

between the tractor and

implement while backing up to the

implement.

▲Keep hands, feet, and clothing

away from power-driven parts.

▲Wear snug ﬁtting clothing to avoid

entanglement with moving parts.

▲Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

working area.

▲Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

▲Do not carry passengers on

implement at any time.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

potential hazard to personal safety involved and extra

safety precaution must be taken. When you see this

symbol, be alert and carefully read the message that

follows it. In addition to design and conﬁguration of

equipment, hazard control and accident prevention

are dependent upon the awareness, concern,

prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of

equipment.

Be Aware of

Signal Words

A Signal word designates a degree or

level of hazard seriousness. The

signal words are:

Indicates an imminently hazardous

situation which, if not avoided, will

result in death or serious injury. This

signal word is limited to the most

extreme situations, typically for

machine components that, for

functional purposes, cannot be

guarded.

!DANGER

Indicates a potentially hazardous

situation which, if not avoided, could

result in death or serious injury, and

includes hazards that are exposed

when guards are removed. It may also

be used to alert against unsafe

practices.

Indicates a potentially hazardous

situation which, if not avoided, may

result in minor or moderate injury. It

may also be used to alert against

unsafe practices.

!WARNING

!CAUTION

For Your Protection

▲Thoroughly read and understand

the “Safety Label” section, read all

instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put

tractor in park, turn off engine, and

remove the key.

▲Detach and store implements in a

area where children normally do

not play. Secure implement by

using blocks and supports.

OFF

REMOVE

Parts Manual QR Locator

The QR (Quick Reference) code on the front

cover and to the left will take you to the

Parts Manual for this equipment. Download

the appropriate App on your camera phone,

open the App, point your phone on the QR

code and take a picture.

Dealer QR Locator

The QR code on the left will

link you to available dealers

for Land Pride products.

Refer to Parts Manual

QR Locator on this page for

detailed instructions.

Important Safety Information

AFM4211 All Flex Grooming Mower 315-507M 4/12/11

Table of Contents

These are common practices that may or may not be applicable to the products described in

this manual.

Practice Safe

Maintenance

▲Understand procedure before

doing work. Use proper tools and

equipment, refer to Operator’s

Manual for additional information.

▲Work in a clean dry area.

▲Lower the implement to the

ground, put tractor in park, turn off

engine, and remove key before

performing maintenance.

▲Allow implement to cool

completely.

▲Do not grease or oil implement

while it is in operation.

▲Inspect all parts. Make sure parts

are in good condition & installed

properly.

▲Remove buildup of grease, oil or

debris.

▲Remove all tools and unused

parts from implement before

operation.

Transport

Machinery Safely

▲Comply with state and local laws.

▲Maximum transport speed for

implement is 20 mph. DO NOT

EXCEED. Never travel at a speed

which does not allow adequate

control of steering and stopping.

Some rough terrains require a

slower speed.

▲Sudden breaking can cause a

towed load to swerve and upset.

Reduce speed if towed load is not

equipped with breaks.

▲Use the following maximum

speed - tow load weight ratios as

a guideline:

20 mph when weight is less

than or equal to the weight of

tractor.

10 mph when weight is double

the weight of tractor.

▲IMPORTANT: Do not tow a load

that is more than double the

weight of tractor.

Use Safety

Lights and Devices

▲Slow moving tractors, self-

propelled equipment, and towed

implements can create a hazard

whendrivenon publicroads.They

are difﬁcult to see, especially at

night.

▲Flashing warning lights and turn

signals are recommended

whenever driving on public roads.

Use A Safety Chain

▲A safety chain will help control

drawn machinery should it

separate from the tractor

drawbar.

▲Use a chain with the strength

rating equal to or greater than

the gross weight of the towed

machinery.

▲Attach the chain to the tractor

drawbar support or other

speciﬁed anchor location. Allow

only enough slack in the chain

to permit turning.

▲Do not use safety chain for

towing.

Important Safety Information

4/12/11 AFM4211 All Flex Grooming Mower 315-507M

Land Pride Table of Contents

Prepare for Emergencies

▲Be prepared if a ﬁre starts.

▲Keep a ﬁrst aid kit and ﬁre

extinguisher handy.

▲Keep emergency numbers for

doctor, ambulance, hospital and

ﬁre department near phone.

911

Wear

Protective Equipment

▲Wear protective clothing and

equipment appropriate for the job.

Avoid loose ﬁtting clothing.

▲Prolonged exposure to loud noise

can cause hearing impairment or

hearing loss. Wear suitable

hearing protection such as

earmuffs or earplugs.

▲Operating equipment safely

requires the full attention of the

operator. Avoid wearing radio

headphones while operating

machinery.

These are common practices that may or may not be applicable to the products described in

this manual.

Avoid High

Pressure Fluids Hazard

▲Escapingﬂuidunder pressure can

penetrate the skin causing

serious injury.

▲Avoid the hazard by relieving

pressure before disconnecting

hydraulic lines or performing work

on the system.

▲Make sure all hydraulic ﬂuid

connections are tight and all

hydraulic hoses and lines are in

good condition before applying

pressure to the system.

▲Use a piece of paper or

cardboard, NOT BODY PARTS, to

check for suspected leaks.

▲Wear protective gloves and safety

glasses or goggles when working

with hydraulic systems.

▲If an accident occurs, see a

doctor immediately. Any ﬂuid

injected into the skin must be

treated within a few hours or

gangrene may result.

Keep Riders

Off Machinery

▲Riders obstruct the operator’s

view, they could be struck by

foreign objects or thrown from the

machine.

▲Never allow children to operate

equipment.

Tire Safety

▲Tire changing can be dangerous

and should be performed by

trained personnel using the

correct tools and equipment.

▲When inﬂating tires, use a clip-on

chuck and extension hose long

enough to allow you to stand to

one side and NOT in front of or

over the tire assembly. Use a

safety cage if available.

▲When removing and installing

wheels, use wheel handling

equipment adequate for the

weight involved.

Important Safety Information

AFM4211 All Flex Grooming Mower 315-507M 4/12/11

Table of Contents

Safety Labels

Your mower comes equipped with all safety labels in

place. They were designed to help you safely operate

your implement. Read and follow their directions.

1. Keep all safety labels clean and legible.

2. Replace all damaged or missing labels. To order new

labels go to your nearest Land Pride dealer or visit our

dealer locator at landpride.com.

3. Some new equipment installed during repair requires

safety labels to be affixed to the replaced component as

specified by Land Pride. When ordering new components

make sure the correct safety labels are included in the

request.

4. Refer to this section for proper label placement.

To install new labels:

a. Clean the area the label is to be placed.

b. Spray soapy water on the surface where the label is to

be placed.

c. Peel backing from label. Press firmly onto the surface.

d. Squeeze out air bubbles with the edge of a credit card.

818-558C

Warning: Serious Injury

818-339C

Warning: High Pressure

26884

Important Safety Information

4/12/11 AFM4211 All Flex Grooming Mower 315-507M

Land Pride Table of Contents

818-019C

Warning:

Negative Tongue Weight

818-561C

Danger: Raised Wing

818-560C

Notice: Manual Info.

26884

818-565C

Important: U-Joint Timing Instructions

26884

Important Safety Information

AFM4211 All Flex Grooming Mower 315-507M 4/12/11

Table of Contents

818-337C

Warning: Max Trans Speed

26884

26884 818-130C

Caution:540 RPM

818-351C

Caution: Lock For Transport

818-353C

Caution: Unlock To Unfold

26884

Important Safety Information

4/12/11 AFM4211 All Flex Grooming Mower 315-507M

Land Pride Table of Contents

818-556C

Danger: Thrown Object Hazard

Location: (3-Places) On Back of All Three Decks

818-552C

Danger: Entanglement

ROTATING DRIVELINE

KEEP AWAY!

818-045C

Warning: Pinch point or Crushing Hazard

Location: (3-Places) On Back of All Three Decks

818-555C

Danger: Rotating Blade

Location: (3-Places) On Back of All Three Decks

26884

19609

Important Safety Information

AFM4211 All Flex Grooming Mower 315-507M 4/12/11

Table of Contents

818-003C

Slow Moving Vehicle Label

Location: On Back of Center Deck Only

19608

19609 838-345C

Caution: V-Belt Installation

Right Hand & Center Deck (Beneath Belt Guard)

19609

838-270C

Caution: V-Belt Installation:

Left Hand Deck (Beneath Belt Guard)

818-543C

Danger: Guard Missing

Location: (6-Places)

Beneath Both Guards on All Three Decks

19609

Autres manuels pour AFM4211

Table des matières

Autres manuels Land Pride Tondeuse à gazon

Land Pride

Land Pride FDR2572 Manuel utilisateur

Land Pride

Land Pride AFM4016 Manuel utilisateur

Land Pride

Land Pride FDR25 Series Manuel utilisateur

Land Pride

Land Pride FM20 Manuel utilisateur

Land Pride

Land Pride AFM4211 Manuel utilisateur

Land Pride

Land Pride FM31 Series Manuel utilisateur

Land Pride

Land Pride AFM4214 Series Manuel utilisateur

Land Pride

Land Pride FDR3690 Manuel utilisateur

Land Pride

Land Pride ZST40 Manuel utilisateur

Land Pride

Land Pride FDR3590 Manuel utilisateur

Land Pride

Land Pride FM3188 Manuel utilisateur

Land Pride

Land Pride Z44 Accu-Z Razor Manuel utilisateur

Land Pride

Land Pride PATRIOT FDR1648 Manuel utilisateur

Land Pride

Land Pride Dual Spindle RCR25 Manuel utilisateur

Land Pride

Land Pride Accu-Z Razor 357-044M Manuel utilisateur

Land Pride

Land Pride Accuz Z52 Manuel utilisateur

Land Pride

Land Pride 357-344M Manuel utilisateur

Land Pride

Land Pride AFM4014 Manuel utilisateur

Land Pride

Land Pride 357-044M Manuel utilisateur

Land Pride

Land Pride FDR3590 Manuel utilisateur

Land Pride

Land Pride ACCU-Z ZT60i Manuel utilisateur

Land Pride

Land Pride AFM4522 Manuel utilisateur

Land Pride

Land Pride FD2548 Manuel utilisateur

Land Pride

Land Pride FDR2584 Manuel utilisateur

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

Craftsman

Craftsman 917.378461 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur