Lampo IP66 Manuel utilisateur

B-

-W

USER’ S MANUAL release 1.0

This manual must be considered an integral part of the projector.

BEFORE CONNECTING AND USING THE PROJECTOR, IT IS IMPORTANT TO READ CAREFULLY ALL THE

INSTRUCTIONS IN THIS MANUAL.

QUALIFIED PERSONNEL ONLY, IN COMPLIANCE WITH ALL THE SECURITY LAWS, CAN DO THE

INSTALLATION, THE MAINTENANCE AND THE UTILISATION OF THIS PROJECTOR.

BEFORE CONNECTING THE PROJECTOR, MAKE SURE THAT THE FREQUENCY AND THE VOLTAGE

VALUES ARE SUITABLE AS SPECIFIED ON THE PROJECTOR.

FOR ANY DOUBT, CONTACT YOUR SUPPLIER OR SEND AN E-MAIL TO:

[email protected]

SOLID: Dust-tight

WATER: Protected against heavy seas

Suitable for direct mounting on normally flammable surfaces

Minimum distance from lighted objects (meters)

Rated maximum ambient temperature (indoor with ventilation)

Connection must be made to a power supply system fitted with efficient

earthing (EN60598-1 – Class I fixture)

Replace any cracked protective shield, dichroic filter or lens

Index

Dimensions and weight ---------------------------------------------------------------------------------- page 2

Technical data --------------------------------------------------------------------------------------------- page 2

Admissible environmental conditions ----------------------------------------------------------------- page 2

Storage ------------------------------------------------------------------------------------------------------ page 2

Example of installation ---------------------------------------------------------------------------------- page 3

How many projector can I drive? --------------------------------------------------------------------- page 4

What is RGBW controller ------------------------------------------------------------------------------ page 4

Optycal system ------------------------------------------------------------------------------------------- page 5

Lamp replacement --------------------------------------------------------------------------------------- page 6

Spare parts ------------------------------------------------------------------------------------------------ page 7

Dimensions & weight

AS125 Slight TWO 4 lamps = 4,8 Kg

AS126 Slight TWO 8 lamps = 4,9 Kg

Technical data

- Aluminium body with cooling fins, no fans

- Thermal-shock resistant glass

- Protection rate IP66

- Brackets for adjustable fixing

- Can be installed in any position

- Ideal for distances between 2 and 6m

- Halogen Lamp 50W 230V long life - GU10 socket – (example: Osram HALOPAR, Philips TWISTline)

- 4 lamps or 8 lamps version

- Colour changing system Red Green Blue White. (unlimited colours combination)

AS125 Slight TWO 4 lamps:

it is without the electronics inside; it must be driven by a “RGBW Controller”

AS 126 Slight TWO 8 lamps:

it is without the electronics inside; it must be driven by a “RGBW Controller”

Admissible environmental conditions

The projector was engineered and produced to function in outdoor areas with an air temperature ranging between 0° and 35°C

and with a humidity level between 30 and 90%.

When choosing the installation, please make sure that the device is not exposed to extreme heat or in small area.

Storage

The projector, in its original packing, must be kept in covered, dry areas with a temperature between –10°C and +50°C.

Attention, the projector will be damaged during the unpacking.

Example of installation

The power unit of RGBW CONTROLLER drives a series of Slight TWO, 6 wires cable.

In the example RGBW CONTROLLER drives a series of SLIGHT TWO on a STAND ALONE mode or on DMX (any

stardard DMX consol can control one or more RGBW controller).

Slight TWO has 2 terminal connection blocks, one for the IN-PUT wires and one for the OUT-PUT wires

(see the drawing)

COMMON = NEUTRAL common

= GROUND

RED = RED Slight lamps

GREEN = GREEN Slight lamps

BLUE = BLUE Slight lamps

WHITE = WHITE Slight lamp

How many projector can I drive?

Using a series of projectors with section 1.5mmq cables, RGBW CONTROLLER can drive up to a maximum of 8

Slight TWO 4 lamps.

Using a series of projectors with section 2.5mmq cables, RGBW CONTROLLER can drive up to a maximum of 16

Slight TWO 4 lamps.

Using a series of projectors with section 1.5mmq cables, RGBW CONTROLLER can drive up to a maximum of 4

Slight TWO 8 lamps.

Using a series of projectors with section 2.5mmq cables, RGBW CONTROLLER can drive up to a maximum of 8

Slight TWO 8 lamps.

The series of Slight TWO driven by RGBW controller execute the same colour simultaneously.

Do not use standard dimmers to drive Slight TWO.

Do not change the cable sequence.

What is the RGBW CONTROLLER?

RGBW CONTROLLER, it is a unit that can control a series of halogen projectors. To order this unit it is necessary

specify if the projectors are with 3, 4 or 8 lamps, to have the correct software.

RGBW CONTROLLER is available with DIN45 fasting (for switch board), or inside an IP65 metal box (all indoor

and outdoor application).

RGBW CONTROLLER can work on stand alone mode or on DMX (with dmx consol).

Optical system

Slight projectors have a very wide beam.

Slight 4 lamps has one lamp for each colour filter (Red-Green-Blue-White)

Slight 8 lamps has two lamps for Red, two lamps for Green, three lamps for Blue and one lamp for White.

The diffuser filter, increasing the beam angle and mixing the primary colours.

Lamp replacement

Disconnect the projector from the main power supply!

1) Unscrew the two screws, then open the projector.

2) Unscrew the two screws that hold the panel with the filters.

3) Remove the panel with the filters.

4) Wearing adequate protective gloves, rotate the bulb that

should be replaced, of 90° CCW, then remove it.

5) Insert a new bulb in the socket and rotate it of 90° CW.

6) Insert the panel with the filters (see point 3).

7) Tight, strongly, the two screws that hold the panel with the filters (see

point 2).

8) Close the projector, and tight, strongly, the two screws (see point 1)

Use only 230V GU10 50W halogen lamps.

HALOGEN LAMPS CONTAIN SUBSTANCES THAT CAN POLLUTE THE AMBIENCE.

DISPOSE OF USING THE APPROPRIATE REFUGES (TOXIC).

Spare parts

When ordering spare parts for the projector remember to mention the model and serial number which can be found on the plate

at the rear of the projector.

Call your area dealer or feel free to contact the manufacturer for any additional assistance.

SPARE PART LIST

CODE DESCRIPTION

LP144 Halogen lamp, 230V 50W, GU10 socket

2618128 Slight bracket (specify the colour)

5108125 Temperate frontal glass, 187x187x5mm

The improper use of this projector, cancel the guarantee and our responsibility. All the information have been written and driven with

extreme care; however, we do not engage us any responsibility for contingent errors or omissions. We reserve the right to modify and/ or

improve our product as we retain necessary, without subsequent warning or notice. It is forbidden any complete or partial reproduction of

this handbook, if not expressly authorized.

Autres manuels pour IP66

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Lampo Équipement d'éclairage

Lampo

Lampo REEL230V10BC Manuel

Lampo

Lampo SYUGR28W Manuel utilisateur

Lampo

Lampo IP40 Led Colour Manuel utilisateur

Lampo

Lampo SENSMICRO Manuel utilisateur

Lampo

Lampo SENSCRP15A Manuel utilisateur

Lampo

Lampo HYPERCOLOR 575 Manuel utilisateur

Lampo

Lampo CARR7WS Manuel utilisateur

Lampo

Lampo IP66 Manuel utilisateur

Lampo

Lampo DIODE ONE Full Colour Manuel utilisateur

Lampo

Lampo KITRGBWR4 Manuel utilisateur

Lampo

Lampo CARR/3W Manuel utilisateur

Lampo

Lampo IP66 Manuel utilisateur

Lampo

Lampo Vogue 575 W Manuel utilisateur

Lampo

Lampo Fari Solar LED Series Manuel utilisateur

Lampo

Lampo PROLUM D3 Manuel utilisateur

Lampo

Lampo IP67 LED Colour changer Manuel utilisateur

Lampo

Lampo SPLED503MC Manuel utilisateur

Lampo

Lampo SYDNEY Series Manuel utilisateur

Lampo

Lampo TB Series Manuel utilisateur

Lampo

Lampo LED300IP20RGBW24 Manuel utilisateur

Lampo

Lampo WLTOUCHSQ Manuel utilisateur

Lampo

Lampo SHOP 150 Manuel utilisateur

Lampo

Lampo SYUGR20W Manuel utilisateur

Lampo

Lampo Fari Solar LED Series Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur