Laguna Tools LT14 SEL Manuel utilisateur

Laguna 14” Bandsaw

REV. 1

Safety Rules

As with all machinery there are, certain hazards involved with the operation and

use. Using it with caution and respect will considerably lessen the possibility of

personal injury. However, if normal safety precautions are overlooked or ignored,

personal injury to the operator may result. If you have any questions relative to

the installation and operation, do not use the equipment until you have contacted

your supplying distributor.

Read carefully before operating the

1. Keep working area clean, and be sure adequate lighting is available.

2. Do not wear loose clothing, gloves, bracelets, necklaces or ornaments.

Wear face, eye, ear, respiratory and body protection devices as indicated for

the operation or environment.

3. Be sure the power is disconnected from the machine before bandsaw is

serviced or an attachment is to be fitted or removed.

4. Never leave the machine with the power on.

5. Do not use a bent, dull, gummy or cracked cutting tool.

6. Be sure the keys and adjusting wrenches have been removed, and all nuts

and bolts are secured.

Warranty

All of the Units are constructed under the strictest quality controls during

production and have undergone a final check before shipping. The guarantee is

valid for a period of 12 months from date of purchase and will be rendered null and

void in the case of unauthorized intervention, tampering or misuse other than

instructions specified in this manual.

IMPORTANT: Once fault has been verified, inform the seller (Laguna Tools) of the

problem or defect. Depending on the problem, the seller will ship a replacement

part or authorize the necessary repairs.

REV. 1

LT14 SEL Bandsaw MBAND145400

Blade length 103” to 105”.

Resaw capacity 8 5/8”.

Heavy duty dynamically balanced cast iron wheels.

Wheel dia 14” x 1 ¼”.

Wheel bearings sealed.

Miter gage slot 3/8” x ¾”.

Upper wheel tension and tilt system in solid steel and cast iron.

Solid upper guide post adjustable to be parallel to blade.

Recommended blades ¼” to ¾”.

Cast table size 15” x 15” with 4” steel extension (Total table size 19” x

15”).

Distance from column to blade 13 ¼”.

Table tilt from -15to +45degrees with flip positive stop at 90degrees.

Double cast iron trunion.

Blade change from the side of the table.

Throat plate aluminum with 3 leveling screws.

Height from ground to table 44” with stand.

Height from base to table 24” without stand.

Base size 13 ½” x 24”.

Space age ceramic blade guide system both top and bottom.

Dust port at the side under the lower blade guide 3 1/8” dia.

Easy adjustable (for blade drift) rip Fence 16” long x 3” high and 1 5/8”.

1” solid steel fence rail.

Motor 1.5 HP 220V 1 Phase only.

Breaker size 15 amp.

Wire supplied 6’ long [No plug supplied].

If a longer wire is required use 12 swg.

Machine weight 230 lbs.

Options

Miter gauge MBB35.00.08.00 5lbs

Stand MBB35.00.09.00 25lbs

REV. 1

Above is one method of packaging. Methods may vary.

Packaging open.

REV. 1

Miter Gauge Optional

Parts that need to be assembled to the bandsaw.

Allen Keys supplied.

REV. 1

Stand assembly Operation 1

NOTE: the angles may face in or out depending on your preference. Do not

tighten the bolts until the complete stand is assembled.

Finished assembled stand.

REV. 1

Second view of the stand on the side.

Bolt the stand to the bottom of the bandsaw with the saw lying down. Tighten all

the bolts before moving the bandsaw to the upright position.

REV. 1

View of the bandsaw in the upright position.

Fit the electrical box to the spine of the bandsaw.

REV. 1

Fit the cable clip and motor cable

View of the electrical box from the front.

REV. 1

Remove the yellow guard, side blade guides and back blade guide. Remove

grease and re-assemble.

View with guard and grease removed

Table des matières

Autres manuels Laguna Tools Scie

Laguna Tools

Laguna Tools 14BX Series Manuel utilisateur

Laguna Tools

Laguna Tools DAKE 14-10 Manuel utilisateur

Laguna Tools

Laguna Tools 18CX Manuel utilisateur

Laguna Tools

Laguna Tools DAKE JH10W1 Manuel d'utilisation et d'entretien

Laguna Tools

Laguna Tools DAKE Euromatic 370S Manuel d'utilisation et d'entretien

Laguna Tools

Laguna Tools MBAND18BX2203 Manuel utilisateur

Laguna Tools

Laguna Tools 16HD Classic Manuel utilisateur

Laguna Tools

Laguna Tools Fusion F1 Manuel utilisateur

Laguna Tools

Laguna Tools Dake VDL-18 Manuel d'utilisation et d'entretien

Laguna Tools

Laguna Tools DAKE SUPER CUT 315 Manuel utilisateur

Laguna Tools

Laguna Tools DAKE Technics 350 SA Manuel d'utilisation et d'entretien

Laguna Tools

Laguna Tools MCO8000-0250 Manuel utilisateur

Laguna Tools

Laguna Tools MTST5S-0135 Manuel utilisateur

Laguna Tools

Laguna Tools Dake VDL-18 Guide de l'utilisateur

Laguna Tools

Laguna Tools MPSP12-5-0135 Manuel utilisateur

Laguna Tools

Laguna Tools Dake SE-5X6 RCT Manuel d'utilisation et d'entretien

Laguna Tools

Laguna Tools HW110LS-30 Manuel utilisateur

Laguna Tools

Laguna Tools Fusion 1 Manuel utilisateur

Laguna Tools

Laguna Tools MPSP12-4-0135 Manuel utilisateur

Laguna Tools

Laguna Tools DAKE SE-1018 Manuel d'utilisation et d'entretien

Laguna Tools

Laguna Tools Platinum Series Manuel utilisateur

Laguna Tools

Laguna Tools Timbermaster Manuel utilisateur

Laguna Tools

Laguna Tools DAKE SE-810 Manuel d'utilisation et d'entretien

Laguna Tools

Laguna Tools Dake Technics 350 CE Manuel utilisateur

Manuels Scie populaires d'autres marques

RIDGID

RIDGID BS1400 Manuel utilisateur

ATIKA

ATIKA BWS 400-2 Manuel utilisateur

RGC

RGC FS20 Manuel utilisateur

Makita

Makita M2300 Manuel utilisateur

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuel utilisateur

IMET Spa

IMET Spa SIRIO 370 AF-E Manuel utilisateur

Optimum

Optimum OPTisaw CS 275 Manuel utilisateur

Makita

Makita BPB180 Manuel utilisateur

Stihl

Stihl MS 462 C-M Manuel utilisateur

AEG

AEG TS 250 K Manuel utilisateur

Meec tools

Meec tools 004665 Manuel utilisateur

Makita

Makita LS1018L Manuel utilisateur

Ryobi

Ryobi RCS1400 Manuel utilisateur

DeWalt

DeWalt DCS391 Manuel utilisateur

Sealey

Sealey SA72 Manuel utilisateur

skilsaw

skilsaw SPT88 Instructions de montage

Urrea

Urrea SI810 Dimensions et guide d'installation

EINHELL

EINHELL BKG 210/1 Manuel utilisateur