La Crosse 519-1416 Manuel utilisateur

Model: 519-1416 www.lacrossetechnology.com/support Page | 1

Model: 519-1416

Instruction Manual

La Crosse Technology® introduces a Multifunctional Atomic Clock that is perfect for everyday use. This digital

clock features a stopwatch function, countdown timer, and storable event countdown timer that counts down the

days to a specific event. The clock also sets itself using the WWVB radio signal and features a large, easy-to-

read display.

MULTIFUNCTIONAL ATOMIC CLOCK

STOPWATCH | TIMER | EVENT COUNTDOWN

Get Support: www.lacrossetechnology.com/519-1416

GET STARTED

Step 1: Insert 3 new AAAlkaline batteries (not included) into the clock. Observe the correct polarity.

Restart: If the time (12:00) is not displayed after 30 seconds, first, check the battery polarity. Second, remove

batteries from the clock for 15 minutes. Return to Step 1 above.

Battery

Compartment

3 “AA”

Battery Cover

Fold out Stand

Hour, Minutes + Seconds

AM/PM, Time Zone

+ WWVB Time Icon

Model: 519-1416 www.lacrossetechnology.com/support Page | 2

Table of Contents

Multifunctional Atomic Clock 1

InitialSetup 1

Restart 1

Table of Contents 2

Features 2

FunctionButtons 3

ProgramMenu 4

WWVB time signal (On/Off) 4

TimeZone-7timezones 4

DST (Daylight Saving Time On/Off) 4

12/24 hour time format 4

SetTime 5

SetCalendar 5

AlarmTime 5

SetAlarm 5

Activate/Deactivate Alarm 5

Snooze Alarm 5

Stopwatch 6

Start/Stop 6

Reset 6

CountdownTimer 6

SetTimer 6

TimerAlarm 6

CountdownTimerMemory 6

EventTimer 7

SetEventTimer 7

EventAlarm 7

EventTimerMemory 7

WWVB Radio-controlled Time Signal 8

Care and Maintenance 8

LowBatteryIcon 8

Specifications 8

Warranty and Support Information 8

FCCStatement 9

Features

Stopwatch

Countdown Timer

Event Timer

12/24 hour atomic time (manual set option)

Calendar

Alarm clock with snooze

7 DST time zones (AST, EST, CST, MST, PST, AKT, and HAT)

Wall hanging or desktop

Model: 519-1416 www.lacrossetechnology.com/support Page | 3

Button Functions

Button Press and Release Functions Hold 3 seconds

START/PAUSE/RESET Stopwatch mode: Start/Stop/Pause

Timer mode: Start/Stop/Pause

Event Timer mode: Start/Stop/Pause

Stopwatch mode: Reset

Timer mode: Reset

Event Timer mode: Reset

MODE Toggle between Time Mode, Timer Mode and Event

Mode Time mode: Set Time/Date

Timer mode: Set Countdown Timers

Event Timer mode: Set Event Timers

+ (UP) 1 step forward (setup) any mode Fast advance (setup)

Time Mode: hold for WWVB manual search

- (DOWN) 1 step backward (setup) Fast backward ( setup)

ALARM Press to display alarm time.

Alarm mode: Activate/deactivate alarm Hold to set alarm time

SNOOZE

Time mode: press to activate the snooze for 10

minutes

Timer mode and Event mode: when the timer

alarm sounds, press to silence the sound.

MEM Timer Mode: Press to view preset values: (MEM1: 5

min, MEM 2: 10min, MEM 3: 15 min, MEM 4: 20

min, MEM 5: 30 min)

Timer and Event Mode: Hold to store a set

number

Program Menu (set time, date, 12/24)

In time mode you can set:

WWVB time signal (On/Off)

Time Zone - 7 time zones

DST (Daylight Saving Time On/Off)

12/24 hour time format

Hour

Minutes

Model: 519-1416 www.lacrossetechnology.com/support Page | 4

Seconds

Month

Date

Year

Program menu buttons:

1. Hold the MODE button to enter time set mode.

2. To adjust values press the DOWN or UP buttons (on top).

3. Press the MODE button to confirm adjustments and move to the next item.

4. Press MODE to exit, or wait 30 seconds without pressing buttons to return to the normal time display.

WWVB Reception ON/OFF

The WWVB time reception defaults to ON. To turn the WWVB reception OFF:

1. Hold the MODE button for 5 seconds.

2. WWVB will show after the time and ON will flash above the time.

3. Press and release the DOWN or UP buttons to turn this OFF.

4. Confirm with the MODE button and move to the Time Zone.

Note: When you select WWVB OFF, Time Zone and DST disappear from the time setting order.

Time Zone

This clock offers seven time zones listed in letter format (default is EST):

1. EST will flash.

2. Press and release the DOWN or UP buttons to select a different Time Zone.

3. Confirm with the MODE button and move to Daylight Saving Indicator.

Daylight Saving Time Indicator ON/OFF

DST will default to the ON position as most of the country observes the DST change. If you live in an area does

not observe the DST change, switch this to the OFF position.

1. DST will show after the time and ON will flash above the time.

2. Press and release the DOWN or UP buttons to turn DST to OFF.

3. Confirm with the MODE button and move to 12/24 hour time format.

12-hour or 24-hour Time Format

The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.

1. Hold the MODE button for three seconds to enter time set mode.

2. 12H will flash.

3. Use the UP OR DOWN buttons to choose 12-hour or 24-hour time format.

4. Press the MODE button to confirm and move to set time.

Set Time

To set the time manually:

1. The Hour digit will flash.

2. Use the UP OR DOWN buttons to choose the hour.

3. Press the MODE button to confirm and move to minutes.

4. The Minutes will flash.

5. Use the UP OR DOWN buttons to choose the minutes.

6. Press the MODE button to confirm and move to seconds.

7. The Seconds will flash.

Model: 519-1416 www.lacrossetechnology.com/support Page | 5

8. Use the UP OR DOWN buttons to rest the second to zero.

9. Press the MODE button to confirm and move to set calendar.

Set Calendar

To set the calendar:

1. The Month will flash.

2. Use the UP OR DOWN buttons to choose the month.

3. Press the MODE button to confirm and move to the date.

4. The Date will flash.

5. Use the UP OR DOWN buttons to choose the date.

6. Press the MODE button to confirm and move to the year.

7. The Year will flash.

8. Use the UP OR DOWN buttons to choose the year.

9. Press the MODE button to confirm and exit.

Note: The day of the week will set automatically once the year, month and date are set.

ALARM (“AL” will show in place of seconds)

ALARM buttons:

1. Hold the ALARM button to enter alarm set mode.

2. To adjust values press the DOWN or UP buttons.

3. Press the ALARM button to confirm adjustments and move to the next item.

Set Time Alarm

From time mode, hold the ALARM button for three seconds to enter alarm set mode.

1. The Hour will flash.

2. Use the UP OR DOWN buttons to set the hour.

3. Press the ALARM button to confirm and switch to minutes.

4. The Minutes will flash.

5. Use the UP OR DOWN buttons to set the minutes.

6. Press ALARM button to confirm and exit.

Note: When no buttons are pressed for 30 seconds the clock will save the last change and default back to

normal time mode.

Activate/Deactivate Time Alarm



In normal mode, press and release the ALARM button once to show alarm time.



Press and release the ALARM button repeatedly to turn ON/OFF alarm.



The alarm icon appears when alarm is activated.

Note: The crescendo alarm will ring for 2 minutes then turn off if no buttons are pressed.

Snooze



When the alarm sounds, press the SNOOZE button to snooze the alarm for 10 minutes.



The snooze option can be repeated three times.



The snooze icon Zz will flash while the snooze feature is active.

STOPWATCH (Count up, tracks duration of events)

Start/Stop: Press the MODE button to switch to TIMER MODE. The default time is zero.

1. Press START/PAUSE button to start counting up.

2. After 23 hours and 59 minutes and 59 seconds the day number will start counting.

3. After counting for 23:59:59 and 364 days it will start displaying the years.

The Timer icon with arrow pointing up will be displayed. Once the timer start the arrow will flash

Alarm Icon

Model: 519-1416 www.lacrossetechnology.com/support Page | 6

Reset:

4. Hold START/PAUSE to reset the time and start from ZERO.

Note: This clock has count up capacity of 9 years, 364 days, 23:59:59.

At 24 hours, a DAY indicator will show

At 365 days a YEAR indicator will show

COUNTDOWN TIMER (cooking, exercising, preset times)

The versatile countdown timer can be used for various activities including cooking and exercising. If the timer

isn’t stopped when the time is up, it will begin to count up to track the time since the timer reached zero. Store

up to five times in the countdown memory feature.

Note: The timers will continue to run if you change modes, allowing full clock and ALARM function.

Set Timer:

1. Hold the MODE button and the Seconds will flash.

2. Use the UP OR DOWN buttons to rest the seconds to zero.

3. Press the MODE button to confirm and move to minutes.

4. The Minutes will flash.

5. Use the UP OR DOWN buttons to choose the minutes.

6. Press the MODE button to confirm and move to hour.

7. The Hour digit will flash.

8. Use the UP OR DOWN buttons to choose the hour.

9. Press the MODE button to confirm and exit.

Note: The countdown timer is programmable up to 23 hours, 59 minutes and 59 seconds.

Start/Stop: Press START/STOP to start or stop the timer.

Reset: Hold START/STOP to clear the timer numbers.

Timer Alarm

When the timer reaches zero, the alarm will sound for 20 seconds.

The timer icon will flash.

The clock will start counting up and display the +icon.

Press any button to stop the alarm.

Countdown Timer Memory

Select preset memory value:

1. In timer mode, press the MEM button to select from 5 preset values from 5 minutes to 30 minutes:

(MEM1: 5 min, MEM 2: 10min, MEM 3: 15 min, MEM 4: 20 min, MEM 5: 30 min).

2. Press the START/STOP button to start or stop the preset timer.

Change any preset memory value:

1. Hold the MODE button and the Seconds will flash.

2. Use the UP OR DOWN buttons to reset the seconds to zero.

The Timer icon with arrow pointing down will be displayed. Once the timer starts the arrow will flash

Model: 519-1416 www.lacrossetechnology.com/support Page | 7

3. Press the MODE button to confirm and move to minutes.

4. The Minutes will flash.

5. Use the UP OR DOWN buttons to adjust the minutes.

6. Press the MODE button to confirm and move to hour.

7. The Hour digit will flash.

8. Use the UP OR DOWN buttons to adjust the hour.

9. Press the MODE button to confirm and exit.

Start/Stop: Press START/STOP to start or stop the timer.

Reset: Hold START/STOP to clear the timer numbers.

Note: The countdown timer is programmable up to 23 hours 59 minutes and 59 seconds.

EVENT TIMER (holiday/appointment countdown, up to 5 events)

Easily track the number of days to specific date using the event countdown timer. This timer is perfect for

counting down the days to holidays or appointments. The event countdown timer allows you to program up to

five events simultaneously.

Note: The event timer is programmable up to 9 years, 364 days, 23 hours 59 minutes and 59 seconds.

Set event timer:

1. The Month digit will flash.

2. Use the UP OR DOWN buttons to choose the month.

3. Press the MODE button to confirm and move to date.

4. The Date digit will flash.

5. Use the UP OR DOWN buttons to choose the date.

6. Press the MODE button to confirm and move to year.

7. The two digit Year will flash.

8. Use the UP OR DOWN buttons to choose the year.

9. Press the MODE button to confirm and move to hour.

10. The Hour digit will flash.

11. Use the UP OR DOWN buttons to choose the hour.

12. Press the MODE button to confirm and move to minutes.

13. The Minutes will flash.

14. Use the UP OR DOWN buttons to choose the minutes.

15. Press the MODE button to confirm and move to seconds.

16. The Seconds will flash.

17. Use the UP OR DOWN buttons to rest the second to zero.

18. Press the MODE button to confirm and exit.

Start/Stop: Press the START/STOP button to start or stop the event timer.

Reset: Hold the START/STOP button to clear the event timer.

Event Alarm

When the event timer reaches zero, the alarm will sound for 20 seconds.

The event icon will flash.

The clock will start counting up and display the +icon.

Press any button to stop the alarm.

Event Timer Memory

The event timer does not have preset values. When you set events, they will store into memory for easy recall

with the MEM button.

Memory

Number

Note: The date information will be saved

and displaying next to the EVENT icon.

The Event icon and Timer icon with arrow pointing down will be displayed. Once the timer starts the

arrow will flash.

Event

Time

Model: 519-1416 www.lacrossetechnology.com/support Page | 8

The first event will store in MEM 1. The next events will store MEM 2, MEM 3, MEM 4, and MEM 5. Then the

next time an event is saved it will replace MEM 1 and start the sequence again.

MEM and a number (MEM 1) will display above the event timer, when you use a preset event timer memory.

Note: Multiple timers (event, stopwatch or countdown) can run at the same time. The timers will continue to run

in the background, when the clock is displayed.

MANUAL WWVB RADIO-CONTROLLED TIME SEARCH

From time mode press the UP button to start or stop a manual signal search.

WWVB Icon will flash

For information about WWVB, visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

LOW BATTERY ICON

Low battery icon indicates low battery for the clock.

If the icon is displayed replace batteries.

SPECIFICATIONS

Operating Temperature:32°F to 122°F (0°C to 50°C)

Power: 3-AA, IEC, LR6 batteries (not included)

Battery Life: Battery life is over 24 months when using reputable battery

brands.

Dimensions: 11.81”L x 6.49”H (29.97cm x 16.51cm)

CARE AND MAINTENANCE



Do not mix old and new batteries



Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries



Do not expose to extreme temperature, vibration or shock.



Clean with a soft damp cloth. Do not use solvents.



The product is not a toy. Keep it out of reach of children.



The product is not to be used for medical purpose or for public information. It is intended for home use only.



The specs of this product may change without prior notice.



Improper use or unauthorized opening of housing voids warranty.

WARRANTY AND SUPPORT INFORMATION

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product

relating to manufacturing defects in materials & workmanship.

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

For warranty work, technical support or other information contact:

La Crosse Technology, Ltd

2817 Losey Blvd. S.

La Crosse, WI 54601

Contact Support: 1-608-782-1610

Low Battery

Icon

WWVB

Icon

Model: 519-1416 www.lacrossetechnology.com/support Page | 9

Product Registration: www.lacrossetechnology.com/support/register

Online Product Support:

www.lacrossetechnology.com/519-1416

Protected under U.S. Patents: 5,978,738, 6,076,044, 6,597,990

FCC STATEMENT

This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) the device must accept any interference received,

including interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE

CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS

COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT

processed using electronic, mechanical or chemical procedures without written permission of the publisher.

This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked

and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their

consequences.

Scan for online information

Autres manuels pour 519-1416

Table des matières

Autres manuels La Crosse Horloge

La Crosse

La Crosse 404-4070 Manuel utilisateur

La Crosse

La Crosse 404-4256 Manuel utilisateur

La Crosse

La Crosse 404-2634INT Manuel utilisateur

La Crosse

La Crosse 404-3950 Manuel utilisateur

La Crosse

La Crosse 433-3836 Manuel utilisateur

La Crosse

La Crosse WT-8112U-BK Manuel utilisateur

La Crosse

La Crosse 616-146Av2 Manuel utilisateur

La Crosse

La Crosse WT525 Manuel utilisateur

La Crosse

La Crosse 433-3236 Manuel utilisateur

La Crosse

La Crosse WT-8112U Manuel utilisateur

La Crosse

La Crosse WT-3181p Manuel utilisateur

La Crosse

La Crosse WS-8115U-IT Manuel utilisateur

La Crosse

La Crosse 616-1410 Manuel utilisateur

La Crosse

La Crosse 519-1416 Manuel utilisateur

La Crosse

La Crosse 404-3015 Manuel utilisateur

La Crosse

La Crosse 616-1908v2 Manuel utilisateur

La Crosse

La Crosse 404-2635 Manuel utilisateur

La Crosse

La Crosse WT535 Manuel utilisateur

La Crosse

La Crosse BBB86088 Dimensions

La Crosse

La Crosse 404-3033 Manuel utilisateur

La Crosse

La Crosse BBB86095 Manuel d'utilisation et d'entretien

La Crosse

La Crosse 513-1417H-AL Manuel utilisateur

La Crosse

La Crosse 403-312 Manuel utilisateur

La Crosse

La Crosse 404-4040 Manuel utilisateur

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8256-AL Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

La Crosse Technology

La Crosse Technology WT-3141b Manuel

La Crosse Technology

La Crosse Technology W86531 Manuel utilisateur

Sharp

Sharp SPC900 Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-50447 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur