La Crosse Technology WS-8117U-IT Manuel utilisateur

WS-8117U-IT www.lacrossetechnology.com/support Page | 1

Model: WS-8117U-IT

Instruction Manual

DC: 041916

ATOMIC DIGITAL CLOCK

WITH MOON PHASE

Foldout Stand

Buttons

Time, Alarm, +

WWVB Icon

Indoor Temp.,

Weekday, Date,

Moon Phase, +

Outdoor Temp.

Two AA

Batteries

SET + ALM SNZ

WS-8117U-IT www.lacrossetechnology.com/support Page | 2

Get Started

1: Insert 2 fresh AA, batteries into the TX37U-IT sensor. Observe correct

polarity.

2: Insert 2 fresh AA, batteries into the atomic clock Observe correct

polarity.

3: Set time, time zone, etc.

4: After 5 minutes place sensor outside in a shaded location.

Restart: If the outdoor temperature shows dashes, remove

batteries from the station & outdoor sensor. Press any button on

the station 20 times. After 15 minutes, return to Step 1.

Set Time, Date, 12/24 Hour, and Temperature Units

1. Press the SET button to enter time set mode, confirm adjustments

and move to next item.

2. Press the +button to adjust values.

Settings order:

1. Time Zone

2. Daylight Saving Indicator

3. Language

4. Hour

5. Minutes

6. Year (2 digit)

7. Month

8. Date

9. Weekday

10. 12/24 Hour Format

11. Fahrenheit/Celsius

Press SET to exit, or wait 30 seconds without pressing buttons to return

to the normal time display.

Set Alarm Time

1. Hold ALM to enter ALM set mode.

2. Press +to adjust values.

3. Press ALM to confirm adjustments and move to next item.

Setting order: 1. Hour, 2. Minutes

Press ALM to exit, or wait 30 seconds without pressing buttons to return

to the normal time display.

This clock has time zones

from GMT 0 to +/-12h

North American time zones

-4

ATL

Atlantic

-5

EST

Eastern (default)

-6

CST

Central

-7

MST

Mountain

-8

PST

Pacific

-9

ALA

Alaska

-10

HAW

Hawaiian

Languages

English

French

Spanish

German

WS-8117U-IT www.lacrossetechnology.com/support Page | 3

Deactivate/Activate ALM

•Press ALM once to deactivate the alarm.

•The alarm icon will disappear.

•Press ALM once to activate the alarm.

•The alarm icon will appear.

Snooze

•Press SNZto silence an active alarm for 10 minutes.

•The alarm icon will flash.

Press any button to stop the alarm for 24 hours.

Display Features

There are four display modes to view the day, seconds, and

temperatures. If seconds are counting up on the clock, press the +

button to move or remove this feature.

Default display: month&date/weekday/indoor temperature /outdoor

temperature.

Change the display:

1. Press the +button. The display should now show the

month&date/weekday/seconds/outdoor temperature.

2. Press the +button a second time and the display will show the

month&date/weekday/indoor temperature/seconds.

3. Press the +button a third time and the display will show the

month&date/seconds/indoor temperature/outdoor temperature.

Press the +button a fourth time and the display will return to the default

display.

WWVB Radio-controlled Time

•WWVB Icon will flash when searching.

•The WWVB icon will be steady when time signal is

received in the past 24 hours.

For information about WWVB visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

ATOMIC SIGNAL SEARCH:

The atomic clock will search for 1 hour between midnight and 6am until

the WWVB time signal is received. After reception, the atomic clock will

only search for the atomic signal after midnight.

WWVB

Atomic Icon

WS-8117U-IT www.lacrossetechnology.com/support Page | 4

Low

Battery

Icons

Moon Phase

The LCD Moon phase is divided by 6 sections, showing a total of 12

phases of the moon.

Note: With the moon shown against a light colored background, the

phases will show opposite to a paper calendar. The segments that are

highlighted will portray the part of the moon that is lit. For instance, the

moon will be blank during a new moon and dark during a full moon.

Low Battery Icon

•When the TX icon is displayed replace batteries in the outdoor

sensor.

•When the RX icon is displayed replace batteries in the atomic clock.

Position Outdoor Sensor

•Mount the outdoor sensor on a north-facing wall or in any well

shaded area. Under an eave or deck rail is preferred.

•The maximum transmitting range to the atomic clock is over 330 feet

(100 meters) in open air, not including walls.

Care and Maintenance

•Do not mix old and new batteries

•Do not mix Alkaline, Standard, Lithium, or Rechargeable Batteries

•Always purchase the correct size and grade of battery most suitable for the

intended use.

•Replace all batteries of a set at the same time.

•Clean the battery contacts and also those of the device prior to battery

installation.

•Ensure the batteries are installed with regard to polarity (+ and -).

•Remove batteries from equipment which is not to be used for an extended

period of time.

•Promptly remove expired batteries.

WS-8117U-IT www.lacrossetechnology.com/support Page | 5

Specifications

Indoor

Temperature Range

14.1°F to +100°F

-9.9ºC to +37.8ºC

Outdoor

Temperature Range

-39.8°F to +139.8°F

-39.8ºC to +59.9ºC

Distance

Over 330 ft. (100 meters)

RF 915MHz (open air)

Interval

About every 4 seconds

Power

Atomic Clock

2-AA, IEC, LR6 batteries

(not included)

TX37U-IT Sensor

2-AA, IEC, LR6 batteries

(not included)

Battery Life

Atomic Clock

Over 24 months

TX37U-IT Sensor

Over 12 months

Dimensions

Atomic Clock

12.20“ x 1.18“ x 8.03“

(310 x 30 x 204mm)

TX37U-IT Sensor 5.05” x 1.50” x 0.83”

(128.3 x 38.2 x 21.2 mm)

Warranty and Support Information

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of

purchase) on this product relating to manufacturing defects in materials &

workmanship.

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

For warranty work, technical support or other information contact our

friendly support staff:

La Crosse Technology, Ltd

2830 26th Street S.

La Crosse, WI 54601

Contact Support: 1-608-782-1610

Product Registration:

www.lacrossetechnology.com/support/register

Online Product Support:

www.lacrossetechnology.com/support

WS-8117U-IT www.lacrossetechnology.com/support Page | 6

Protected under U.S. Patents:

5,978,738 | 6,076,044 | RE43903

FCC Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can

radiate radio frequency energy, and if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any

other antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference

caused by unauthorized changes or modifications to this equipment. Such

changes or modifications could void the user authority to operate the

equipment.

in part, or duplicated or processed using electronic, mechanical or chemical

process without the written permission of the publisher.

This booklet may contain errors or misprints. The information it contains is

regularly checked and corrections are included in subsequent editions. We

disclaim any responsibility for any technical error or printing error, or their

consequences. All trademarks and patents are recognized.

Canada Statement

This device complies with CNR Industry Canada license -exempt devices.

Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that

may cause undesired operation of the device.

Autres manuels pour WS-8117U-IT

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels La Crosse Technology Horloge

La Crosse Technology

La Crosse Technology 513-1417ALv4 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8017U-MAH Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-1235UA-SS Manuel utilisateur

La Crosse Technology

La Crosse Technology 83247-BHG Manuel utilisateur

La Crosse Technology

La Crosse Technology WT-3126B Manuel

La Crosse Technology

La Crosse Technology WT-3143A Manuel utilisateur

La Crosse Technology

La Crosse Technology BBB87733 Manuel d'utilisation et d'entretien

La Crosse Technology

La Crosse Technology 513-1417CH Manuel utilisateur

La Crosse Technology

La Crosse Technology 513-1918S Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-3051B Manuel utilisateur

La Crosse Technology

La Crosse Technology 616-1410 Manuel utilisateur

La Crosse Technology

La Crosse Technology 513-1417 Manuel utilisateur

La Crosse Technology

La Crosse Technology WT-8005U Manuel utilisateur

La Crosse Technology

La Crosse Technology WT-8112U Manuel utilisateur

La Crosse Technology

La Crosse Technology 513-1417AL Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8016U Manuel utilisateur

La Crosse Technology

La Crosse Technology WT-3161BK Manuel utilisateur

La Crosse Technology

La Crosse Technology WT-3129S Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-6002U Manuel utilisateur

La Crosse Technology

La Crosse Technology WT-3161WHx1 Manuel utilisateur

La Crosse Technology

La Crosse Technology WT-3129Bx1 Manuel utilisateur

La Crosse Technology

La Crosse Technology T73743 Manuel utilisateur

La Crosse Technology

La Crosse Technology WT-8112U Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-1225 Manuel utilisateur

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

Sharp

Sharp SPC900 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur

LG LEC-005 Manuel utilisateur

IKEA

IKEA ROTBLÖTA Manuel utilisateur

U-Line

U-Line Н-2811 Manuel utilisateur

Digiview

Digiview RC305EL Manuel utilisateur