Kyocera FS-1714M Manuel utilisateur

User’s Manual

Supplementary Version

Manuel d’utilisation

Version supplémentaire

Manual del usuario

Versión suplementaria

FS-7028M

MICR Printers

Imprimantes MICR

Impresoras MICR

FS-1714M

FS-3718M

MICR Font Characters

Caractères de fonte MICR

Caracteres del tipo de letra MICR

☛These fonts only print at a resolution of 600 dpi.

☛Ces fontes n’impriment qu’à une résolution de 600 ppp.

☛Estos tipos de letras sólo imprimen con una resolución de 600 ppp.

ASCII

E-13B MICR font

Fonte E-13B MICR

Tipo de letra MICR E-13B

ASCII

CMC-7 MICR font

Fonte CMC-7 MICR

Tipo de letra MICR CMC-7

048

049

050

051

052

053

054

055

056

057

065

066

067

068

048

049

050

051

052

053

054

055

056

057

065

066

067

068

069

English

Introduction

Thank you for purchasing a Kyocera MICR printer. Kyocera MICR printers are an extension of the

Kyocera FS-Series Ecosys Printers Family. These printers are especially designed and optimized

for MICR printing. The following chart shows the key specifications of your MICR printer.

This manual supplement describes instructions for using an FS-Series printer as a MICR printer.

For other instructions including the basic operating procedures, refer to the printer’s original

User’s Manual enclosed with this supplement or provided on the Kyocera Digital Library CD-

ROM.

About MICR

Magnetic Ink Character Recognition (MICR) is a technology developed in 1959 for use in auto-

mated processing of checks and other financial transactions. The MICR line, which appear across

the bottom of a check, allow sophisticated bank reader/sorters to rapidly process information.

MICR document processing is widely used because it has a very high reading accuracy. MICR accu-

racy is due in part to the magnetic quality of the ink. It is less sensitive to background color and

patterns common in checks, and can even be recognized when obscured by a piece of paper.

Kyocera MICR printers are specifically designed to print MICR checks and documents.

First Steps

When you set up your printer, we recommend you print at least 3 pages on normal paper to ensure

sufficient MICR toner yield before printing on check paper.

MICR Printer Model Page Per Minute FS-Series Modified

FS-1714M 14ppm FS-1750

FS-3718M 18ppm FS-3750

FS-7028M 28ppm FS-7000+

Features

These Kyocera MICR printers have the following features:

❒Yo ur Ky o cer a MICR p r int er com es with a l ocka ble casse tte f o r secu rely s tori ng che c k sto c k. It i s r ec-

ommended that you store the keys for your printer locks in 2 separate secure locations.

Types of cassettes:

• FS-1714M and FS-3718M : PC-21L

• FS-7028M : PC-30L

❒Your MICR printer will only operate with MICR toner container installed, eliminating the possibility

of printing checks without magnetic toner. Kyocera MICR toner containers are specially designed

to eliminate accidental use of commercial toner. The top of a MICR toner container is green. This

toner will not fit in a non-MICR machine. Standard toner containers are black.

❒Since MICR read-accuracy is essential, Kyocera MICR printers are specially designed to only operate

when toner levels are adequate to guarantee completion of printed check. The message Toner

low indicates that the toner container is nearly empty. Please prepare new toner kit as soon as

possible. If you continue to print, Replace Toner Clean printer appears on the mes-

sage display and printing is disabled.

❒The E-13B MICR font and the CMC-7 MICR font for your Kyocera MICR printer are supplied on a

font card (FC-01M) with your printer. See How to Use the MICR Fonts section for directions on

selecting the MICR font. For memory card operating instructions and handling precautions, refer

to the Memory Card section of the printer’s original User’s Manual enclosed with this supplement

or provided on the Kyocera Digital Library CD-ROM.

Consumables

Refer to the following matrix to determine the following table for consumables, options and parts

for your Kyocera MICR printer.

MICR drum unit, fuser unit, developer unit and feeder need scheduled replacement every 150,000

pages.

Item FS-1714M FS-3718M FS-7028M

MICR Toner TK-90HM TK-90HM TK-92HM

Maintenance Kit MK-90M MK-91M MK-92M

Developer DV-90M DV-90M DV-92M

Drum DK-90M DK-91M DK-92M

Fuser FK-90M FK-91M FK-92M

Feeder FE-90M FE-90M FE-35

Font Card FC-01M FC-01M FC-01M

Paper Cassette PC-20L/PC-21L/PC-23 PC-20L/PC-21L/PC-23 PC-30L

Paper Feeder Unit PF-21L PF-21L PF-30L

English

Maintenance Messages

This section introduces messages that are displayed exclusively by the MICR printer. For other

messages, please refer to the printer’s original User’s Manual.

Optional Paper Feeder

You can upgrade your Kyocera MICR printer with optional lockable paper feeders for securely stor-

ing check stock. The following table shows the paper handling upgrade options for your Kyocera

MICR printer.

Message Corrective Action

Top cover

Open

Open the top cover, then close tightly.

[FS-1714M/FS-3718M only] The wrong type of toner container is

installed. Install a toner container made for use with MICR print-

ers.

Missing

Developer unit

The developer unit is not installed.

Securely install the developer unit in the printer. (For details, see

the printer’s original User’s Manual.)

[FS-7028M only] The wrong type of toner container is installed.

Install a toner container made for use with MICR printers.

Toner low

Clean printer

[FS-1714M/FS-3718M only]

Prepare new toner kit. (Thismessage indicates that thetoner con-

tainer is nearly empty.)

Toner low

[FS-7028M only]

Replace Toner

Clean printer

Replace the toner container with a new one and clean the printer

as explained in the printer’s original User’s Manual that is pro-

vided with each new toner kit.

The printer does not operate when this message is displayed.

Near end

The MICR maintenance kit should be replaced within 3,000

pages. Call your Kyocera MICR reseller to schedule replacement

of maintenance kit.

FS-1714M FS-3718M FS-7028M

Model Name PF-21L PF-21L PF-30L

Paper Size Letter Letter Universal

Maximum Output 500 500 1,000

Maximum number of feeders 2 2 3

How to Use the MICR Fonts

MICR fonts for your Kyocera MICR printer are secured on a font card. For basic printer operating

instruction refer to the printer’s original User’s Manual enclosed with this supplement or provided

on the Kyocera Digital Library CD-ROM. Print samples for the E-13B MICR font and CMC-7

MICR font are shown on the last page of this manual.

To install the MICR fonts:

1. Turn power off.

2. Set the provided font card into the printer’s PC card slot.

3. Turn power on.

[FS-1714M/FS-3718M] [FS-7028M]

PC Card Slot

Font Card

PC Card Slot

Font Card

English

To select the MICR font (FS-1714M/FS-3718M):

1. Press the MODE key to enter Mode Selection Menu. Then, press the +or –key until the message

display indicates FONT >. If the font type displayed is Internal, go to step 2. If it is

Option, go to step 5.

2. Press the ENTER key so that ? flashes.

3. Press the +or –key until Option is displayed.

4. Press the ENTER key so that ? disappears.

5. Press the key to enter font Selection mode. Font number is displayed.

M000 : E13-B

M001 : CMC-7

6. Press the ENTER key so that ? flashes.

7. Press the +or –key until the desired font number is displayed.

8. Press the ENTER key so that ? disappears.

Press the

EXIT

key. This returns the menu display to

Ready

. The MICR font has been selected.

Font >

Internal

Font

? Internal

Font

? Option

Font >

Option

> M000

>?M000

>?M001

> M001

Ready

To select the MICR font (FS-7028M):

1. Press the MODE key to enter Mode Selection Menu. Then, press the +or –key until the message

display indicates FONT >. If the font type displayed is Scalable, go t o st e p 2 . I f i t i s Bit-

map, go to step 5.

2. Press the ENTER key so that ? flashes.

3. Press the +or –key until Bitmap is displayed.

4. Press the ENTER key so that ? disappears.

5. Press the key to enter Bitmap Selection mode. Bitmap font is displayed.

00700 : E13-B

00701 : CMC-7

6. Press the ENTER key so that ? flashes.

7. Press the +or –key until the desired font number is displayed.

8. Press the ENTER key so that ? disappears.

Press the

EXIT

key. This returns the menu display to

Ready

. The MICR font has been selected.

The MICR font can now be selected for printing through your application software. See the user’s

manual for reading fonts/data from a memory card.

Font >

Scalable

Font

? Scalable

Font

? Bitmap

Font >

Bitmap

> Bitmap font

00001

> Bitmap font

? 00001

> Bitmap font

00700

> Bitmap font

? 00700

Ready

English

Using the cassette

Keys are provided for the cassette lock on MICR printer.

Using the key

The key can open or close the cassette as shown in the figures below.

☛There are locks fitted to the cassettes with the optional paper feeders (PF-21L, PF-30L). The

method of opening or closing these cassette locks is the same as the printer. Also, the key

for the paper feeder and the printer are the same shape.

Setting the Universal Cassette for FS-1714M/FS-3718M

By using the optional universal cassette in place of the paper cassette (PC-21L) that is supplied

with the printer, you can print on a wider variety of paper sizes.

Before installing the universal cassette, you must remove the retention bracket from the printer.

The following explains how to remove the retention bracket and install the universal cassette.

☛The universal cassette is not equipped with a lock.

For details regarding the use of the universal cassette, refer to chapter 1 in the FS-1750/

FS-3750 User’s Manual.

To remove the retention bracket and set the cassette:

1. Remove the paper cassette from the printer, and

place it on a flat, stable surface.

2. Put a screw driver into the hole in the retention

bracket and remove the screw from the back of

the retention bracket.

OPEN

[FS-1714M/FS-3718M] [FS-7028M]

OPEN

Paper Cassette

Retention Bracket

Screw Driver

3. With the screw removed and the retention

bracket loose, rotate it to the right as shown in

the figure.

4. Take the retention bracket off the printer.

☛Please be careful not to lose the retention

bracket. You will need it the next time you

want to use the MICR printer’s standard paper

cassette.

5. Hold the cassette as shown in the illustration

and insert the universal cassette into the

printer cassette slot. Push it straight inas far as

it will go.

This completes setting of the universal cassette.

Specification Compliance

Kyocera MICR printers have been tested and conform to MICR printing specifications as outlined in:

❒ANSI X9.27 Printer and Test Specifications for Magnetic Ink Printing

❒ISO-1004 Information Processing-Magnetic Ink Character Recognition-Print Specifications

❒Canadian Payroll Association Standard

All testing was performed using paper stock standard outlined in:

❒ANSI X9.18 Paper Specifications for Checks

MICR Printer Specifications

For general printer specifications, refer to the printer’s original User’s Manual. However, for ambi-

ent conditions, refer to the table below rather than the values indicated in the User’s Manual.

If you install the printer where the temperature or humidity is outside the above ranges, you may

not get the best print quality, and there will be an increased chance of paper jams.

Item Description

Ambient Conditions Temperature: 10 to 24°C (50 to 75.2°F)

Humidity: 20 to 60% RH

Universal Cassette

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Kyocera Imprimante

Kyocera

Kyocera C5025N - FS Color LED Printer Manuel utilisateur

Kyocera

Kyocera KM-6230 Manuel d'exploitation et d'entretien

Kyocera

Kyocera FS-1040 Manuel utilisateur

Kyocera

Kyocera F-1000 Manuel utilisateur

Kyocera

Kyocera TASKalfa 306ci Manuel utilisateur

Kyocera

Kyocera ECOSYS FS-1035MFP/DP Guide de référence

Kyocera

Kyocera ECOSYS P4040dn Manuel utilisateur

Kyocera

Kyocera FS-820 Manuel utilisateur

Kyocera

Kyocera ECOSYS PA2100cx Manuel utilisateur

Kyocera

Kyocera FS-1100 Manuel utilisateur

Kyocera

Kyocera ECOSYS M4132idn Manuel utilisateur

Kyocera

Kyocera 1102RV3AS0 Manuel utilisateur

Kyocera

Kyocera ECOSYS FS-C2526MFP Manuel utilisateur

Kyocera

Kyocera 4020DN - FS B/W Laser Printer Manuel utilisateur

Kyocera

Kyocera FS-5800C Manuel utilisateur

Kyocera

Kyocera FS-1030D Manuel utilisateur

Kyocera

Kyocera FS-C8026N Manuel utilisateur

Kyocera

Kyocera TASKalfa PA4500ci Manuel utilisateur

Kyocera

Kyocera ECOSYS MA6000ifx Manuel utilisateur

Kyocera

Kyocera FS-C5015N Manuel utilisateur

Kyocera

Kyocera ECOSYS P3260dn Manuel utilisateur

Kyocera

Kyocera ECOSYS P2035d Manuel utilisateur

Kyocera

Kyocera ECOSYS PA2100cwx Manuel utilisateur

Kyocera

Kyocera ECOSYS PA4500cx Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur