Kyocera TASKalfa 8000i Manuel utilisateur

Card Authentication Kit (B) Operation Guide

Introduction

Thank you for purchasing our Card Authentication Kit (B).

This product enables you to use the ID card user

authentication system.

Precautions

To install the optional function, you need the License Key.

Please access the designated website of your dealer or

service representative, and register “Machine No.”

indicated on your machine and “Product ID” indicated on

the License Certificate supplied with the product to issue

the License Key.

For ID card reading, refer to the instructions of the card

reader.

For User Login setting and user registration, refer to

Management in the Operation Guide of the machine.

To make authentication using your ID card, you need to

are pre-registered on. For registration procedure, refer to

the To register the ID card information.

Installation Procedure

1 Press the System Menu key and then press [System].

If user login administration is disabled, the user

authentication screen appears. Enter your login user

name and password and then press [Login]. For this,

you need to log in with administrator privileges.

2 Press [Next] of Optional Function.

3 The optional function screen is displayed. Select CARD

AUTHENTICATION KIT(B) and press [Activate].

4TheLicense Key entry screen is displayed. Enter the

License Key using the numeric keys and press

[Official].

5 The confirmation screen appears. Confirm the product

name CARD AUTHENTICATION KIT(B) and press

[Yes].

Connecting the USB cable

Connect the USB cable of ID card reader to the USB

memory slot on the machine.

Setting User Login

Make the settings of Local Authentication in User Login/Job

Accounting or User Login on the machine.

NOTE:For User Login setting, refer to Management in the

Operation Guide of the machine.

When you enable User Login on the machine, you need to

make the setting of user account for the printer driver in

order to print by the computer. For details, refer to the

Printer Driver User Guide, Device Settings, and

Administrator Settings.

Registering/deleting the ID card

information

The procedures below are to register or delete the card

information of a pre-registered user.

For new registration or change of user information on Local

User List, refer to Management in the Operation Guide of

the machine.

To register the ID card information

To login using the ID card, you need to register the ID card

information in the user information.

Follow the steps below.

1 Press the System Menu key.

NOTE: If Local Authentication has been set in User Login,

the ID Card Login screen appears. Refer to Login on the

back side or the procedure of Keyboard Login, and login

using the ID card registered with administrator privileges or

using the login user name.

2 Press [User Login/Job Accounting].

NOTE: If User Login is disabled, the ID Card Login screen

appears. Refer to Login on the back side or the procedure

of Keyboard Login, and login using the ID card registered

with administrator privileges or using the login user name.

3InUser Login Setting, press [Next] →[Local User List],

and then [Register/Edit].

4 Select the user for whom you wish to register the ID

card information, and press [Detail].

5 Press [Change] in [ID Card information].

6 Hold the ID card to be registered over the card reader.

Completed. appears and the screen returns to the

Detail menu.

7IntheDetail menu, press [Register]. The confirmation

screen appears.

8 Press [Yes]. The ID card information is now registered.

To delete the ID card information

You can delete the ID card information registered in the

user information.

Follow the steps below.

1 Perform the step 1 to 3 of To register the ID card

information.

2 Select the user from whom you wish to delete the ID

card information, and press [Detail].

3 Press [Change] in [ID Card information].

4 Press [Delete].

5 In the confirmation screen, press [Yes]. The screen

returns to the Detail menu.

6 In the Detail menu, press [Register]. The confirmation

screen appears.

7 Press [Yes]. The ID card information is now deleted.

To register on the computer

The ID Register utility for registering/deleting ID card

information on the computer is provided.

You can download the ID Register utility from the vendor’s

website.

After installing the Card Authentication Kit (B) and setting

User Login, Use ID card to login. will appear when you use

the machine.

To login, hold the ID card over the ID card reading part.

Keyboard Login

You can login by entering the login user name and login

password without using the ID card.

NOTE: You can make the login permission or prohibition

setting. For the setting procedure, refer to Keyboard Login

setting.

Follow the steps below.

1 Press [Keyboard Login].

2 Enter the login user name and login password, and

then press [Login].

NOTE: To return to the ID Card Login screen, press [ID

Card Login].

Logout

After completing the procedure, press the Logout key on

the control panel.

Keyboard Login setting

You can make the Keyboard Login permission or prohibition

setting.

Follow the steps below.

1 Press the System Menu key.

NOTE:If Local Authentication has been set in User Login,

the ID Card Login screen appears. Refer to Login or refer to

the procedure of Keyboard Login, and login using the ID

card registered with administrator privileges or using the

2 Press [User Login/ Job Accounting].

NOTE: If User Login is disabled, the ID Card Login screen

appears. Refer to Login or refer to the procedure of

Keyboard Login, and login using the ID card registered with

administrator privileges or using the login user name.

3 In [User Login Setting], press [Next] →[ID Card

Setting], [Next] →[Keyboard Login], and then press

[Change].

4 Press [Permit] or [Prohibit].

5 Press [OK].

Responding to Error Messages

If the panel displays any of these message, follow the

corresponding procedure.

Error Message Corrective Actions

Cannot recognize the

ID card reader. Make sure the USB connector of the ID

card reader is correctly connected to

the machine.

If [USB Host]is set to [Block], change

the setting to [Unblock].

Cannot recognize. Make sure your ID card has been

registered.

This ID card is

already registered to

another user.

Your ID card has already been

registered. Change it to another ID

card.

Cannot read data in

this ID card. In registration process, the ID card

information was not read correctly. Hold

again the ID card over the ID card

reading part.

If the same message still appears, the

ID card may not be compatible with this

product. Change it to another ID card.

First edition 2011.1

Autres manuels pour TASKalfa 8000i

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kyocera Accessoires pour imprimantes

Kyocera

Kyocera KM-C2520 Manuel utilisateur

Kyocera

Kyocera TASKalfa 650c Manuel utilisateur

Kyocera

Kyocera FS-C5016N Manuel d'utilisation et d'entretien

Kyocera

Kyocera FS 1920 - B/W Laser Printer Manuel utilisateur

Kyocera

Kyocera KM-C2520 Manuel utilisateur

Kyocera

Kyocera TK1110 Guide de démarrage rapide

Kyocera

Kyocera TASKalfa 8000i Manuel utilisateur

Kyocera

Kyocera KM-C3225 Manuel utilisateur

Kyocera

Kyocera PF-530 Manuel utilisateur

Kyocera

Kyocera FS 4000DN - B/W Laser Printer Manuel utilisateur

Kyocera

Kyocera FS-1700 Manuel utilisateur

Kyocera

Kyocera KM-C2520 Manuel utilisateur

Kyocera

Kyocera FS FS-C8500DN Manuel utilisateur

Kyocera

Kyocera TASKalfa 620 Manuel utilisateur

Kyocera

Kyocera PF-510 Manuel utilisateur

Kyocera

Kyocera FS-1100 Manuel utilisateur

Kyocera

Kyocera Mita PF-400 Manuel utilisateur

Kyocera

Kyocera ECOSYS FS-C2126MFP Manuel d'installation et d'exploitation

Kyocera

Kyocera FS-C5100DN Manuel utilisateur

Kyocera

Kyocera KYOCERA FS-C8100DN Manuel utilisateur

Kyocera

Kyocera TASKalfa 650c Manuel utilisateur

Kyocera

Kyocera KM-C2520 Manuel utilisateur

Kyocera

Kyocera TASKalfa 400ci Manuel utilisateur

Kyocera

Kyocera ECOSYS FS-1350DN Manuel utilisateur

Manuels Accessoires pour imprimantes populaires d'autres marques

Star Micronics

Star Micronics TSP800 Series Manuel utilisateur

REA

REA JET HR pro 2K Manuel utilisateur

HP Laserjet,Color Laserjet 4si Manuel utilisateur

oliser

oliser MS 45 Manuel utilisateur

Roland

Roland DU2-64 Instructions et recettes

Xerox

Xerox EFI EXP6000 Manuel utilisateur

Canon

Canon Finisher-T1 Manuel utilisateur

Sharp

Sharp FO-1MK Manuel utilisateur

Labelmate

Labelmate PM-300 Manuel utilisateur

Epson

Epson T6248 Manuel d'utilisation

Epson

Epson OT-BZ20 Manuel utilisateur

Canon

Canon TonerRobot EP-27 Manuel utilisateur

Ricoh

Ricoh LCIT RT5100 Guide de démarrage rapide

GBC

GBC 16 Series Manuel utilisateur

Canon

Canon INNER 2-WAY TRAY-E1 Manuel d'utilisation et d'entretien

Develop

Develop SD-509 Manuel utilisateur

Triumph Adler

Triumph Adler DF-710 Manuel

Citizen

Citizen CBM-202PC Series Manuel utilisateur