KYLAND Technology PTS-10A Manuel utilisateur

PTS-10A

Time Server

Operation Manual

Kyland Technology (Shanghai) Co., Ltd.

Version Copyright

Kyland Technology (Shanghai) Co., Ltd.

Room 802, Building 5, No.3000 Longdong Avenue

Pudong District, Shanghai, China

Tel: +86-21-80321288

Fax: +86-21-80321289

Kyland Technology (Shanghai) Co., Ltd PTS-10A Time Server

Contents

1. Basic Features ............................................................................................................ 2

1.1. Introduction................................................................................................. 2

2. LCD ............................................................................................................................. 3

2.1. Main Screen................................................................................................. 3

2.1.1. Time Infomation................................................................................... 3

2.1.2. Status Infomation ................................................................................. 3

2.2. Indicator Light and Keys .............................................................................. 3

2.3. Status Indication.......................................................................................... 4

2.3.1. Time Information ................................................................................. 4

2.3.2. PTP Information.................................................................................... 4

2.3.3. Source Information............................................................................... 5

2.3.4. Clock Information ................................................................................. 7

2.3.5. Position Information............................................................................. 8

2.3.6. Version Information.............................................................................. 8

3. Operations ................................................................................................................. 9

3.1. Settings ........................................................................................................ 9

3.1.1. Setting Options..................................................................................... 9

3.1.2. Setting Confirmation ............................................................................ 9

3.2. Source Settings .......................................................................................... 10

3.3. Clock Settings ............................................................................................ 12

3.4. NTP Settings............................................................................................... 13

3.5. PTP Settings ............................................................................................... 14

3.6. Output Settings.......................................................................................... 15

3.6.1. SO Output........................................................................................... 15

3.6.2. O1-O5 Output..................................................................................... 16

3.6.3. IRIG-B-AC Output................................................................................ 16

3.7. Network Settings ....................................................................................... 17

3.8. Default Settings ......................................................................................... 18

3.9. System Settings.......................................................................................... 18

Figure Index .................................................................................................................... 19

- 1 -

Kyland Technology (Shanghai) Co., Ltd PTS-10A Time Server

1. Basic Features

1.1. Introduction

[Figure 1-1] PTS-10A Time Server

The PTS-10A Time Server is a standard time server. It supports high precision

reference clock, which can be synchronized to absolute time such as GPS, BDS, and

GLONASS etc. Built-in TCXO, OCXO, Rubidium clock helps to provide stable reference

frequency source. System supports multiple sources time sync auto selection

algorithm which can perform stable switch between GPS, BDS, GLONASS, IRIG-B, PTP

and local clock, and sky/ground and master/slave clock backup. PTS-10A time server

provides flexible time output channels and signals. The output timing signals include

PPS, PPM, PPH, IRIG-B (Demodulated), IRIG-B (Modulated), Serial Time Signal (TOD

etc.) etc. Plus, PTS-10A supports network sync time protocols NTP/SNTP and PTP

(IEEE1588 v2). IEEE1588 can works in several modes by the software configuration

including grandmaster clock, slave clock and boundary clock. PTS-10A has LCD to show

any status and do configuration by keyboard. Meanwhile, PTS-10A is designed to send

timing source status and clock status to control center by IEC61850 MMS, IEC60870-

T104, DNP3.0, Modbus etc. PTS-10A also supports WEB and SNMP to manage system.

- 2 -

Kyland Technology (Shanghai) Co., Ltd PTS-10A Time Server

2. LCD

2.1. Main Screen

The default main screen is shown as below:

2014-01-01 09:00:00 M

GPS 08-OK-3D LOCK

[Figure 2-1] PTS-10A Main Screen

The screen has two line characters. The top line always shows the time information

and PTP clock information. The bottom line shows time server status including time

source status, clock status, position information and version information.

2.1.1. Time Infomation

It lies in the top line of screen. Time information includes time as the following format yyyy-mm-

dd hh:mm:ss and PTP clock information as M (Master), S (Slave) and B (Boundary).

2014-01-01 09:00:00 M

[Figure 2-2] PTS-10A Time Information

2.1.2. Status Infomation

Time server shows the current time source status, clock status, position information and version

information. The detail information please refers to section 2.3.

GPS 08-OK-3D LOCK

[Figure 2-3] PTS-10A Status Information

2.2. Indicator Light and Keys

Press any key of front panel to view information and change parameters.

Name Description

LEFT Show Information as left direction.

RIGHT Show information as right direction.

Enter Confirm operation.

ESC Cancel operation or Back to high level

- 3 -

Kyland Technology (Shanghai) Co., Ltd PTS-10A Time Server

Indicator light of front panel shows time server status.

Name Description

PSW On: Power On; Off: Power Off

SAT On: Satellite Number >=4; Off: Satellite Number <4

ANT On: Antenna is normal; Off: Antenna is abnormal

LOCK

Flash(1 second): Clock is locked;

Flash(3 seconds):Clock is holded;

Off: Clock is unlocked

NOTE: When screen backlight is off, press any key will ative screen again.

2.3. Status Indication

Time server will be shown as the following information.

All information screens can be shown by LEFT or RIGHT key at the main screen.

2.3.1. Time Information

The system time is shown at the first part of top line. This line is fixed.

The time format is YYYY-MM-DD HH:MM:SS.mmm.

2014-01-01 09:00:00 M

GPS 08-OK-3D LOCK

[Figure 2-4] System Time (LOCAL)

This is a local time display with local time zone.

The daylight saving time (DST) will show ‘*’ at the end of system reference time.

2014-01-01 09:00:00 * M

GPS 08-OK-3D LOCK

[Figure 2-5] System Time (DST)

2.3.2. PTP Information

The PTP clock status is shown at last part of top line. This line is fixed.

The PTS-10A might work in one of the following modes:

Master PTP Grandmaster Clock

Slave PTP Slave Clock

Boundary PTP Boundary Clock

2014-01-01 09:00:00 M

PTP 000-000-P2P LOCK

2014-01-01 09:00:00 S

PTP 000-000-P2P LOCK

- 4 -

Kyland Technology (Shanghai) Co., Ltd PTS-10A Time Server

2014-01-01 09:00:00 B

PTP 000-000-P2P LOCK

[Figure 2-6] PTP Information

2.3.3. Source Information

The time source status is shown at bottom line.

The display contents will be changed by LEFT or RIGHT key.

Use GPS as sync source, the display format is shown below:

GPS xx-xx-xx

xx (1st) The amount of locked GPS satellites at present.

xx (2nd) GPS antenna status. Following is the status introduction:

OK: antenna normal

UV: low antenna power supply voltage

NV: no antenna power supply voltage

OC: antenna over current

xx (3rd) GPS fix mode. Following is the mode introduction:

3D: The best fix mode.

2D: 2D fix mode. Not enough tracked satellites

HD: Hold over. Just lost the tracking to satellites, but time

accuracy should be OK.

No: No fix. No satellites are tracked.

2014-01-01 09:00:00 M

GPS 08-OK-3D LOCK

[Figure 2-7] Sync Source: GPS

Use BDS as sync source, the display format is shown below:

BDS xx-xx-xx

xx (1st) The amount of locked BDS satellites at present.

xx (2nd) BDS antenna status. Following is the status introduction:

OK: antenna normal

UV: low antenna power supply voltage

NV: no antenna power supply voltage

OC:antenna over current

xx (3rd) BDS fix mode. Following is the mode introduction:

3D: The best fix mode.

2D: 2D fix mode. Not enough tracked satellites

- 5 -

Kyland Technology (Shanghai) Co., Ltd PTS-10A Time Server

HD: Hold over. Just lost the tracking to satellites, but time

accuracy should be OK.

No: No fix. No satellites are tracked.

2014-01-01 09:00:00 M

BDS 08-OK-3D LOCK

[Figure 2-8] Sync Source: BDS

Use GLONASS as sync source, the display format is shown below:

GLN xx-xx-xx

xx (1st) The amount of locked GLONASS satellites at present.

xx (2nd) GLONASS antenna status. Following is the status introduction:

OK: antenna normal

UV: low antenna power supply voltage

NV: no antenna power supply voltage

OC:antenna over current

xx (3rd) GLONASS fix mode. Following is the mode introduction:

3D: The best fix mode.

2D: 2D fix mode. Not enough tracked satellites

HD: Hold over. Just lost the tracking to satellites, but time

accuracy should be OK.

No: No fix. No satellites are tracked.

2014-01-01 09:00:00 M

GLN 08-OK-3D LOCK

[Figure 2-9] Sync Source: GLONASS

Use IRIG-B as sync source, the display format is shown below:

IRIG-B xx-xx-xxx

xx (1st) IRIG-B input format. Following is the format introduction:

DC: IRIG-B Demodulated

AC: IRIG-B Modulated

xx (2nd) IRIG-B input interface. Following is the interface introduction:

FI1: IRIG-B input interface named FI1 on the rear panel.

FI2: IRIG-B input interface named FI2 on the rear panel.

xxx (3rd) The number of IRIG-B input frame from 0 to 999. It means

when count number over 999, it will start from 0 again.

2014-01-01 09:00:00 M

IRIG DC-FI1-255 LOCK

- 6 -

Kyland Technology (Shanghai) Co., Ltd PTS-10A Time Server

[Figure 2-10] Sync Source: IRIG-B-DC

Use PTP as sync source (i.e., the PTS-10A can work as PTP Slave Clock or Boundary

Clock), the display format is shown below:

PTP xxxx xxxxx xxx

xxxx(1st) PTP Offset value, the unit is ns.

The value range is between -999 to +999.

If out of this range, it will use ‘*’ instead.

xxxxx(2nd) PTP Delay Measurment value, the unit is ns.

The value range is between -9999 to +9999.

If out of this range, it will use ‘*’ instead.

xxx(3rd) PTP Mode, E2E or P2P

2014-01-01 09:00:00 S

PTP 000-000-P2P LOCK

[Figure 2-11] Sync Source (PTP-P2P-Slave)

2014-01-01 09:00:00 B

PTP 000-000-E2E LOCK

[Figure 2-12] Sync Source (PTP-E2E-Boundary)

2.3.4. Clock Information

For any kind of time reference source, the lastpart of line always shows clock status.

For seeking status, ‘SEEK’ is displayed; for initial status, ‘INIT’ is displayed; for sync

status, ‘SYNC’ is displayed; for lock status, ‘LOCK’ is displayed; for time adjust status,

‘RCRV’ is displayed; for hold status, ‘HOLD’ is displayed.

2014-01-01 09:00:00 M

LOCAL No Source SEEK

[Figure 2-13] Sync Lock Mode (SEEK)

2014-01-01 09:00:00 M

LOCAL No Source INIT

[Figure 2-14] Sync Lock Mode (INIT)

2014-01-01 09:00:00 M

GPS 08-OK-3D SYNC

[Figure 2-15] Sync Lock Mode (SYNC)

2014-01-01 09:00:00 M

GPS 08-OK-3D LOCK

[Figure 2-16] Sync Lock Mode (LOCK)

- 7 -

Kyland Technology (Shanghai) Co., Ltd PTS-10A Time Server

2014-01-01 09:00:00 M

GPS 08-OK-3D RCVR

[Figure 2-17] Time Setting Mode (RCVR)

2014-01-01 09:00:00 M

LOCAL No Source HOLD

[Figure 2-18] Hold Mode (HOLD)

2.3.5. Position Information

When get the satellite information from satellite source, system will show the position

information including longitude, latitude and height.

2014-01-01 09:00:00 M

Longitude: 0.0000000 E

[Figure 2-19] Longitude

2014-01-01 09:00:00 M

Latitude: 0.0000000 N

[Figure 2-20] Latitude

2014-01-01 09:00:00 M

Height: 0.000 M

[Figure 2-21] Height

2.3.6. Version Information

View the version information of software from screen. The version will show detailed

version information and compile date and time of software.

2014-01-01 09:00:00 M

VER: R7.40

[Figure 2-22] Version

2014-01-01 09:00:00 M

VER:Feb 22 2016 16:42:02

[Figure 2-23] Compile Date & Time

- 8 -

Table des matières

Autres manuels KYLAND Technology Serveur de temps réseau

KYLAND Technology

KYLAND Technology PTS-DR200 Manuel utilisateur

Manuels Serveur de temps réseau populaires d'autres marques

EKOS

EKOS EKOSync 1588 Manuel utilisateur

Meinberg

Meinberg LANTIME M200/GPS Manuel d'utilisation et d'entretien

Meinberg

Meinberg LANTIME M600 Manuel d'utilisation et d'entretien

Meinberg

Meinberg LANTIME M300/MRS/AD10-AD10 Manuel d'utilisation et d'entretien

TPA

TPA S5 Manuel utilisateur

Meinberg

Meinberg LANTIME M300/GPS/2LNE/AD10-AD10 Manuel d'utilisation et d'entretien

Gorgy Timing

Gorgy Timing LEDI NETWORK iTS Manuel utilisateur

Mobatime

Mobatime DTS 4160.grandmaster Manuel utilisateur

Meinberg

Meinberg LANTIME M300/GNS/RPS Manuel d'utilisation et d'entretien

Mobatime

Mobatime DTS 4128.timeserver Manuel utilisateur

Meinberg

Meinberg IMS LANTIME M1000 Manuel utilisateur

BRG Precision Products

BRG Precision Products NTP100B Manuel utilisateur

Krontek

Krontek KT2000 Manuel utilisateur

Meinberg

Meinberg LANTIME M300/TCR Manuel d'utilisation et d'entretien

Mobatime

Mobatime NTS Manuel utilisateur

Bodet Time

Bodet Time Sigma H Instructions et recettes

Bodet

Bodet NETSILON 7 AC Manuel utilisateur

Meinberg

Meinberg LANTIME M100 Manuel utilisateur