KTM 450 SMR 2021 Manuel

SETUP INSTRUCTIONS 2021

450 SMR

Art. no. 3214385en

INTRODUCTION

*3214385en*

3214385en

03/2021

INTRODUCTION

Perform the work described in these setup instructions before the vehicle is delivered to the customer.

Read the setup instructions in their entirety before beginning work.

These setup instructions were written to correspond to the latest state of this series. We reserve the right to make

changes in the interest of technical advancement without at the same time updating this manual.

We shall not provide a description of general workshop methods. Likewise, safety rules that apply in a workshop

are not specified here. It is assumed that the work will be performed by a fully trained mechanic.

All specifications contained herein are non-binding. KTM Sportmotorcycle GmbH specifically reserves the right

to modify or delete technical specifications, prices, colors, forms, materials, services, designs, equipment, etc.,

without prior notice and without specifying reasons, to adapt these to local conditions, as well as to stop produc-

tion of a particular model without prior notice. KTM accepts no liability for delivery options, deviations from fig-

ures and descriptions, misprints, and other errors. The models portrayed partly contain special equipment that

does not belong to the regular scope of supply.

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission

of the copyright owner.

ISO 9001(12 100 6061)

KTM applies quality assurance processes that lead to the highest possible product quality as

defined in the ISO 9001 international quality management standard.

Issued by: TÜV Management Service

KTM Sportmotorcycle GmbH

Stallhofnerstraße 3

5230 Mattighofen, Austria

This document is valid for the following models:

450 SMR (F8403U0)

1 MEANS OF REPRESENTATION

1.1 Symbols used

The meaning of specific symbols is described below.

Indicates an expected reaction (e.g. of a work step or a function).

Indicates an unexpected reaction (e.g. of a work step or a function).

Indicates a page reference (more information is provided on the specified page).

Indicates information with more details or tips.

Indicates the result of a testing step.

Indicates a voltage measurement.

Indicates a current measurement.

Indicates a resistance measurement.

Indicates the end of an activity including potential rework.

1.2 Formats used

The typographical formats used in this document are explained below.

Proprietary name Indicates a proprietary name.

Name®Indicates a protected name.

Brand™ Indicates a brand available on the open market.

Underlined terms Refer to technical details of the vehicle or indicate technical terms, which

are explained in the glossary.

SETUP 2

2.1 Transport mode

H02712-01

This vehicle was blocked for transport in the software.

To operate the vehicle, the vehicle electronics must be enabled.

This process is conducted during initial setup in KTM Dealer.net.

Enabling ensures that the initial setup in KTM Dealer.net is docu-

mented.

Enabling can be performed either temporarily, e.g. for a test ride,

or permanently for vehicle handover.

Info

Make sure that the vehicle is permanently enabled before

handing it over to the customer.

2.2 Diagnostics connector

H00933-12

The diagnostics connector 1is located under the seat below the

EFI control unit.

2.3 Unpacking and setting up the vehicle

F01082-01

–Remove the box and the plastic packaging.

Guideline

To avoid damaging the vehicle while setting it up, do

not remove the protective film on each component until

installing the component, and leave it on the vehicle until

work has been completed.

–Remove the separate enclosure and unpack it. Check that the

scope of supply is complete using the enclosed packing list.

Info

The procedure for missing components is described in

the Customer Service Manual.

–Have a lift stand available.

Lift stand (78129955100)

F03419-10

–Carefully loosen and remove tension belt 1from the footrest

brackets on the left and right.

Info

An assistant prevents the motorcycle from falling over.

–Remove screws 2from the footrest bracket on the left and

right.

2 SETUP

H01079-01

–Together with an assistant, take the vehicle off the pallet.

–Position the vehicle on a lift stand.

–Check the vehicle for transport damage.

Info

The procedure in the event of transport damage is

described in the Customer Service Manual.

B00375-13

–Remove screws 3. Take off the handlebar clamps.

–Remove screws 4. Take off handlebar supports.

–Place handlebar supports in required position.

Info

The handlebar supports are longer and higher on one

side.

Position the left and right handlebar supports evenly.

–Mount and tighten screws 4.

Guideline

Screw, handle-

bar support

M10 40 Nm (29.5 lbf ft)

Loctite®243™

F03420-01

Warning

Danger of accidents A repaired handlebar poses a

safety risk.

If the handlebar is bent or straightened, the mate-

rial becomes fatigued. The handlebar may break as a

result.

–Change the handlebar if the handlebar is damaged

or bent.

–Position the handlebar.

Info

Make sure the cables and wiring are positioned cor-

rectly.

Do not kink the cables and lines.

–Position the handlebar clamps.

Info

The markings on the handlebar should be at the center

of the handlebar clamps.

–Mount screws 3, but do not tighten yet.

–First bolt the handlebar clamps with screws 3onto the

longer, higher side of the handlebar supports so that both parts

touch.

SETUP 2

Guideline

Screw, handlebar

clamp

M8 20 Nm (14.8 lbf ft)

–Tighten screws 3evenly.

Guideline

Screw, handlebar

clamp

M8 20 Nm (14.8 lbf ft)

–Check the handlebar position.

» If the handlebar position is not adjusted as required by the

customer:

–Adjust the handlebar position. ( p. 9)

F01130-01

–Position the controls on the right half of the handlebar.

F03421-10

–Position the controls on the left handlebar half.

–Tighten screw 5.

Guideline

Screw, fixed

grip

M4 5 Nm (3.7 lbf ft)

Loctite®243™

F03422-01

–Mount the left hand guard.

–Mount the right hand guard.

Info

Read the accompanying KTM PowerParts fitting instruc-

tions.

2 SETUP

S03029-10

–Remove the start number plate. ( p. 10)

–Route cable 6of the combination switch to the left.

–Remove protection cap and join plug-in connector 7.

F03423-01

–Mount the handlebar cushion.

–Install the start number plate. ( p. 11)

Z01425-10

–Position the new footrest and pin.

Info

Only insert the pin to the extent that the spring can still

be mounted.

F03424-10

–Position spring as shown.

Spring Aengages in area B.

SETUP 2

F03425-10

–Press the spring with special tool 8.

Footrest spring plier (79029083000)

The special tool is applied to area Con the footrest.

–Mount pin 9.

F03426-10

–Mount the washer and splint bk.

–Repeat these steps on the opposite side.

F03427-10

–Position the left frame protector.

–Insert the right frame protector from below and push it to the

rear.

–Mount and tighten screws bl with washers.

Guideline

Screw, frame protec-

tor

M5 3 Nm (2.2 lbf ft)

–Mount and tighten screw bm.

Guideline

Screw, frame protec-

tor

M5 3 Nm (2.2 lbf ft)

–Mount the cable ties.

–Charge the 12-V battery. ( p. 14)

–Unpack and mount the KTM PowerParts included in the deliv-

ery (optional).

Info

Read the accompanying KTM PowerParts fitting instruc-

tions.

–Attach the stickers included in the scope of supply (optional).

–Refuel. ( p. 17)

–Position all controls in their exact positions on the handlebar.

Tighten all screws.

–Remove the remaining film, padding, the corrugated card-

board, and the other packaging material.

–Prepare the vehicle according to the specifications in

KTM Dealer.net for handover to the customer.

2 SETUP

Info

Transport mode must be deactivated to be able to start

the motorcycle.

Autres manuels pour 450 SMR 2021

Table des matières

Autres manuels KTM Moto

KTM

KTM 790 Adventure 2019 Manuel utilisateur

KTM

KTM 2013 1190 RC8 R JP Manuel

KTM

KTM 250 EXC-F Six Days 2019 Manuel

KTM

KTM 250 EXC-F EU 2012 Manuel

KTM

KTM 125 EXC EU 2011 Manuel

KTM

KTM 250 EXC-F 2017 Manuel utilisateur

KTM

KTM 1290 Super Adventure EU 2015 Manuel

KTM

KTM 85 SX 19/16 2015 Manuel

KTM

KTM 1290 Super Duke R Manuel

KTM

KTM 1290 SUPER DUKE R 2021 Manuel utilisateur

KTM

KTM 690 SMC R Manuel

KTM

KTM 690 SMC USA 2010 Manuel utilisateur

KTM

KTM 350 EXC-F SIX DAYS EU Manuel utilisateur

KTM

KTM 125 Duke 2017 Manuel utilisateur

KTM

KTM 250 EXC TPI 2022 Manuel

KTM

KTM 125 SX Guide de l'utilisateur

KTM

KTM 50 SENIOR ADVENTURE 2006 Manuel utilisateur

KTM

KTM 350 XC-F Manuel utilisateur

KTM

KTM Freeride E-XC 2021 Manuel utilisateur

KTM

KTM 790 Duke 2019 Manuel utilisateur

KTM

KTM RC 125 2019 Manuel utilisateur

KTM

KTM 640 ADVENTURE1999 Manuel utilisateur

KTM

KTM 690 SMC R 2017 Manuel utilisateur

KTM

KTM 990 Supermoto R USA 2010 Manuel utilisateur

Manuels Moto populaires d'autres marques

OHVALE

OHVALE GP-0 Manuel de la liste des pièces

Yamaha

Yamaha Star XV19CTSZ 2009 Manuel utilisateur

HYOSUNG

HYOSUNG ST7 Manuel utilisateur

Husqvarna

Husqvarna FC 250 2016 Manuel utilisateur

Ducati

Ducati SCRAMBLER 800 Manuel d'instructions

MOTO GUZZI

MOTO GUZZI QUOTA 1100 ES Manuel utilisateur

APRILIA

APRILIA ETV MILLE CAPONORD - PART1 02-2001 Manuel utilisateur

Yamaha

Yamaha 2006 YZF-R1V Manuel utilisateur

Fantic

Fantic Enduro 125 Manuel utilisateur

Ducati

Ducati Supersport 750 desmodue Manuel utilisateur

MV Agusta

MV Agusta 2008 F4 312RR 1078 Manuel d'instructions

Yamaha

Yamaha XVS650A Manuel utilisateur

Yamaha

Yamaha YZF-R6T(C) Manuel

Ducati

Ducati 748 monoposto strada Manuel utilisateur

ATK

ATK 1988 250 Manuel utilisateur

Excelsior-HENDERSON

Excelsior-HENDERSON 1999 HCX Manuel utilisateur

Triumph

Triumph Thunderbird Manuel utilisateur

Yamaha

Yamaha 2006 FJR1300A Manuel utilisateur