Kruger KA300 Manuel utilisateur
User Manual
Chimney Style Range Hoods
KA300, KA360, KG300, KG360, KT300, KT360
ENGLISH
2
3
Please follow the recommendations and guidelines contained in this
manual. This will ensure that the appliance will give you consistent
performance and efciency for many years to come.
Thank you for choosing Krüger home appliances!
The following symbols will help you when reading this instruction manual:
TABLE OF CONTENTS
Guide To Using This Manual
SPECIFICATIONS & TECHNICAL PARAMETERS.........................4
IMPORTANT SAFETY INFORMATION..........................................5
BOX CONTENTS........................................................................8
INSTALLATION....................................................................9
OPERATION .............................................................................12
LIGHTING.......................................................................13
MESH FILTER............................................................................13
CLEANING&MAINTENANCE.....................................................14
WARRANTY..........................................................................16
NOTES............................................................................18
Suggestions & Advice
Safety Information
!
4
KA300 & KA360
KG300 & KG360
KT300 & KT360
SPECIFICATIONS & TECHNICAL PARAMETERS
Rated Voltage 120V
Rated Power Frequency 60Hz
Lighting Power Consumption 2 x 2.5W LED Lights
Motor Power Consumption 210W
Total Power Consumption 215W
Number of Motors 1
Dimensions of Duct Exhaust 6” Ø (Circular)
Overall Dimensions 29 ½” or 35 ½” (W) x 19 ¾” (D) x 30 ¾” (H)
Rated Voltage 120V
Rated Power Frequency 60Hz
Lighting Power Consumption 2 x 2.5W LED Lights
Motor Power Consumption 210W
Total Power Consumption 215W
Number of Motors 1
Dimensions of Duct Exhaust 6” Ø (Circular)
Overall Dimensions 29 ½” or 35 ½” (W) x 19 ¾” (D) x 30 ¾” (H)
Rated Voltage 120V
Rated Power Frequency 60Hz
Lighting Power Consumption 2 x 2.5W LED Lights
Motor Power Consumption 210W
Total Power Consumption 215W
Number of Motors 1
Dimensions of Duct Exhaust 6” Ø (Circular)
Overall Dimensions 29 ½” or 35 ½” (W) x 19 ¾” (D) x 41” (H)
ALTO - A
ALTO - G
ALTO - T
5
These instructions have been drawn up for your safety and that of others.
You are therefore strongly urged to read them carefully before installing
and using the appliance. Keep this instruction manual for future reference
as necessary. If the appliance is sold or moved, make sure that the manual
is transferred over to the new user.
❏Installation of the appliance and its connection to the electrical mains
must only be carried out by QUALIFIED PERSONNEL in accordance
with local applicable codes and standards, including re-rated
construction.
❏The hood must be placed at a minimum distance of 26” and a
maximum of 30” from the cooktop for best capture of cooking
impurities, and a minimum distance of 28” from the gas range.
❏In order to provide sufcient air for proper exhausting of gases through
the chimney, follow the heating equipment manufacturer’s guideline
and safety standards such as those published by the National Fire
Protection Association, and the American Society for Heating,
Refrigeration and Air Conditioning Engineer (ASHRAE), and local code
authorities.
❏To reduce the risk of re or electric shock, be areful not to use this fan
with any solid-state speed control device.
❏When cutting or drilling into the wall or ceiling, do not damage
electrical wiring and other hidden utilities.
❏This unit is meant for household kitchen use only. To ensure your
safety, it needs to be connected to a GFCI protected branch circuit.
TO REDUCE RISK OF FIRE, ELECTRIC SHOCK
OR INJURY TO PERSONS, PLEASE OBSERVE
THE FOLLOWING:
i.1 Installation
WARNING
6
❏Before any cleaning or service procedure, it is important to check that
the appliance is DISCONNECTED from the electrical service panel.
This will prevent power from being switched on accidentally.
❏It is risky to modify or attempt to modify the characteristics of this
product.
❏After removing the appliance from the packaging, make sure that
it is undamaged, and that the electrical lead is in perfect condition.
Otherwise contact your dealer before putting the appliance into
operation.
❏Use this unit only in the manner it is intended for by the manufacturer.
If you have any questions regarding the usage of this appliance,
please contact the manufacturer or the local agent closest to you.
❏The Manufacturer declines all responsibility in case of failure to comply
with the accident prevention regulations.
❏Make sure that air is able to circulate freely around the appliance. Poor
ventilation may result in a shortage of oxygen.
❏Make sure that the appliance is supplied with the type of gas indicated
on the relative sticker next to the main gas connection pipe.
❏Use of a gas cooking appliance produces heat and moisture in the
room in which it is installed. Ensure that the room is well ventilated by
keeping the air intakes open and in good working order or by installing
an extractor hood with a discharge pipe.
❏If the appliance is required to be used intensively for a long period of
time, the effectiveness of the ventilation will have to be increased, for
example by opening a window or increasing the power of any electric
extractor fan.
❏The stainless steel structural housing may have sharp edges. Be
careful to avoid cuts and abrasions during installation and cleaning.
7
❏This product is designed to cook food inside ordinary homes and
for non-professional purposes. It should not be used for any other
purpose.
❏After using the appliance, make sure that all controls are in the “OFF”
position.
❏If you use an electrical socket in close proximity to this appliance, take
care that the cables of the appliances you are using are far away from
any parts of this appliance that may heat up.
❏This appliance is designed and intended to be operated by adults
only. Children are not allowed to tamper with the controls or play with
this appliance.
❏The exposed parts of this appliance heat up during cooking and
remain hot for some time even after it is switched off. Keep children
well away until the appliance has cooled down.
❏Keep the appliance thoroughly cleaned after every use. Grease should
not be allowed to accumulate on the fan or lter, as food residues
such as scraps, oils, and fats, may become a re hazard.
❏In the unlikely instance of a malfunction, never attempt to repair the
appliance yourself. Repairs by unskilled persons may further damage
the unit, and can greatly jeopardize the safety of yourself and your
family.
❏To diagnose the malfunction, please refer to the contents of this
manual. If you do not nd the necessary information, please contact
your nearest service centre.
❏Servicing work on this appliance must be carried out by a KRÜGER™
authorized technical service centre. Always request the use of original
replacement parts.
i.2 During Use
i.3 Child Safety
i.4 Cleaning & Maintenance
i.5 Servicing & Parts
8
❏All the materials used to build this appliance are environmentally
compatible and recyclable. Please make your contribution to
conserving the environment by using the various waste collection
channels available.
❏Appliances which are no longer used or usable are not worthless
waste. Through environmentally friendly disposal, a number of
materials used in the production of your appliance can be recovered.
❏Find out about the current disposal options from your dealer, or your
local authority.
❏Before scrapping the appliance, cut the power supply lead and render
it unusable for safe handling.
i.6 Environmental Protection
BOX CONTENTS
Unpack hood and check box contents. You should receive:
1x Hood
1x Telescopic Chimney
1x Mounting Bracket
1x Vent
1x Lower Duct Support
1x Upper Duct Support
7x Mounting Screws (4x40mm)
10x Mounting Screws (4x8mm)
9x Drywall Anchors (2 for Ø 8mm holes)
2x Washer (ts Ø 8mm holes)
1x Flexible Aluminium Duct
1x Installation Instruction Manual
1x Warranty Card
2x Safety Screws (ST4 x 30mm)
9
For proper operation of a gas appliance, the air necessary for the combustion
of the gas must be able to ow into the room naturally.
The air must ow into the room directly through openings in the outside
walls. These openings must have an unobstructed cross-section not less
than 1.18CFM or 2m3/h for each kw of power (see total power in kw on the
appliance nameplate).
This opening must be constructed so that it will not be obstructed from inside
or outside, or constructed close to the oor. The opening is recommended to
be on the side opposite to that on which the ue gases are discharged.
If it is not feasible to provide these openings in the room where the appliance
is installed, the necessary air may be taken from an adjacent room, provided
that:
• This room is not a bedroom or a hazardous environment;
• This room has ventilation;
• The ventilation between the room where the appliance is installed and the
adjacent room have openings.
Installation Premises
INSTALLATION
This appliance must only be installed and used in rooms with permanent
ventilation to local standards.
Installation of the appliance and its connection to the electrical mains
must only be carried out by QUALIFIED PROFESSIONALS.
Before installation, it is important to check that the appliance is
DISCONNECTED from the electrical main service terminal. KRUGER™
declines all responsibility for any damages arising from installation in
breach of the regulations in force or from failure to comply with the
accident prevention regulations.
!
10
Mounting Brackets
1. Measure the total width of the space where
the hood will be and divide it by half.
2. Draw a vertical line from the cooking surface
to the ceiling. This will be the center line of
which the hood will be mounted according
to.
3. Draw a horizontal line at minimum 25 ½”
above an electric element cook top, or
minimum 30 ½” above a gas cooking
surface.
4. Place the upper chimney mounting brackets
on the wall approximately ¾” from the
ceiling.
5. Mark the wall where the center holes of the
brackets are.
6. Place the hood mounting bracket on the wall
aligning the central notches to the vertical
reference line.
7. Mark the wall at the center of the holes in
the bracket.
8. Attach the brackets to the wall using the
mounting screws and drywall anchors if
applicable.
Autres manuels pour KA300
1
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Kruger hotte de ventilation
Kruger
Kruger KH 300 Manuel utilisateur
Kruger
Kruger KCE 140PA Manuel utilisateur
Kruger
Kruger Ecowatt K320 Series Guide d'installation
Kruger
Kruger ALTO-H Manuel utilisateur
Kruger
Kruger KA300 Manuel utilisateur
Kruger
Kruger ALTO-T Manuel utilisateur
Kruger
Kruger Ecowatt Drive K354 Series Guide d'installation
Kruger
Kruger KM300 Manuel utilisateur
Kruger
Kruger KCE 100PA Manuel utilisateur
Kruger
Kruger KR-300 Alto-R Manuel utilisateur
