kromo KP202E Fiche technique
Istruzioni per l'uso e la
manutenzione
IT
COD.: 4500_U
Ed. 01 - 10/2011
APPLICARE ETICHETTA
MATRICOLA
Instructions for Use and
Maintenance
EN
Thank you for choosing our machine.
The instructions for installation, maintenance and use found on the following pages have
been prepared to ensure a long life and perfect operation of your unit.
Please, do follow the instructions carefully.
We have designed and built this machine using the latest innovative technologies. Now
you shall take good care of it.
Your full satisfaction is our greatest reward
EN
page 25
WARNING: FAILURE TO COMPLY, EVEN PARTIALLY, WITH THE
PRESCRIPTIONS IN THIS MANUAL WILL RENDER THE PRODUCT
WARRANTY NULL, AND THE MANUFACTURER SHALL NOT BE
LIABLE.
READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLING
THE MACHINE.
TRANSLATION OF THE ORIGINAL INSTRUCTION
CONTENTS Page
WARNINGS 27
1. MACHINE DESCRIPTION 28
1.1 Machine description 29
1.2 Machine features 30
2. OPERATION 31
2.1 Control panel and relative symbols 31
2.2 Machine start-up 31
2.2.1 Start-up 31
2.2.2 Operation 32
2.2.3 Switching OFF 33
2.3 Detergent use 34
2.4 Rinse aid use 34
2.5 Drain pump system (optional) 34
2.6 Emptying boiler and break tank (anti-freeze function) 35
WARNINGS 35
3. ECOLOGICAL ASPECTS 36
3.1 Recommendations for optimal use of energy, water and additives 36
4. H.A.C.C.P. AND HYGIENE REGULATIONS 36
5. MAINTENANCE 37
5.1 Routine maintenance 37
5.2ExtraordinaryMaintenance-byqualiedServicePersonnel 38
6. MACHINE INSTALLATION 39
6.1 Handling 39
6.1.1 Handling the product 39
6.1.2 Storage 39
6.2 Prepare for installation 39
6.2.1 Room features 39
6.2.2 Electrical connection - Characteristics 40
6.2.3 Water supply connection - Characteristics 70
6.2.4 Steam evacuation 40
6.3 Installation 41
6.3.1 Positioning the machine 41
6.3.2 Electrical connection 41
6.3.3 Water connection 41
6.3.4 Start-up 41
7. SIGNALS AND ALARMS 42
8. ENVIRONMENTAL ASPECTS 43
8.1 Packaging 43
8.2 Disposal 43
9. TROUBLESHOOTING 44
EN
page 27
WARNINGS
This instruction booklet must be kept with the machine for future consultation. If this machine
is sold or transferred to other users, make sure the booklet always goes with the unit so
that the new owner can have all the necessary information on operations and all relevant
instructions.
The instruction booklet must be carefully read before installation and before starting the
machine.
These instructions are supplied to safeguard the users in compliance with Directive 2006/95/
CE as amended and the “harmonized product Technical Standard” EN 60335-1 and EN
60335-2-58.
• THE CONNECTION TO THE ELECTRICAL AND WATER NETWORKS, FOR INSTALLING
THIS UNIT, MUST BE CARRIED OUT BY QUALIFIED OPERATORS ONLY.
• Theusershallnotcarryoutanyrepairand/ormaintenanceoperations.Inanycasecontact
qualiedpersonnel.
• Onlyqualiedpersonnelcanaccessthecontrolpanel,whenthemainpowerswitchisOFF.
• Servicingofthismachinemustbeperformedbyauthorizedpersonnelonly.
N.B.: Use genuine spare parts only. Non-genuine parts will void the warranty and the
manufacturer will take no responsibility for any damage.
•Follow the instructions given in the manufacturer’s booklet for cleaning operations (chap.5).
• Thismachinemustonlybeusedbyadults.Thisisaprofessionalmachinetobeusedbyqualied
personnel,installedandrepairedexclusivelybyqualiedTechnicalPersonnel.TheManufacturer
declines any responsibility for improper installation, use, maintenance or repair.
• Theapplianceshallnotbeusedbychildrenorpersonswithreducedphysical,sensoryormental
capabilities, or lack of experience and knowledge.
• Childrenmustbeattendedandshallstayawayfromthismachine.
NOTE: The manufacturer declines any responsibility for accidents to people or any damage
deriving from failure to observe the above listed instructions.
EN
page 28
1. MACHINE DESCRIPTION
1.1 Machine Description
Wall-hung main power
switch: at installation ser-
viceman supply and care,
according to local laws
Door
Control panel
EN
page 29
Standard equipment:
nr. 1 Stainless steel rack
and
nr. 1 Inox spatulas rack
and
nr.1 Trays support 8 pcs
Optional equipment:
Sac à Poche Support
Optional:
Probe lack
detergent/rinse aid
Optional:
Drain pump
Optional:
Heat Recovery
Optional:
Detergent dispenser
EN
page 30
Total power
Power supply
Total absorption
Pump power
Protection rate
Electrical protection rate
To operate the machine, 3 connections are needed:
• Electrical;
• Watersupply;
• Waterdrain.
This is a cycle machine comprising a 55°C wash cycle with detergent, a 85°C rinse cycle
with injection of rinse-aid in the boiler hull.
This machine is designed exclusively for washing trays, baking-pans, food containers and
pans in general with human food type of residue.
Any other use is deemed improper.
Do not wash articles polluted with petrol, paint, chips of steel or iron, fragile objects or ma-
terial not resistant to the washing process.
Do not use acidic corrosive chemical products or alkaline and solvents or chlorine based
detergents.
Do not open the machine door when operating.
In any case, the machine has a special safety device which immediately stops the unit if the
door is open, thus preventing water spillage.
Always switch the machine completely off and drain the water tank, before accessing in-
side.
1.2 Machine features
The machine’s sound level is LpA= 70dBA ± 2.5 (machine with 700x700mm racks). **
The machine’s sound level is LpA= 73dBA ± 2.5 (machine with 850 x 725 mm racks). **
The machine’s sound level is LpA= 74dBA ± 2.5 (machine with 1350 x 725 mm racks). **
**test made according to EN 60335-2-58/A11
EN
page 31
2. OPERATION
2.1 Control panel and relative symbols
A: Cycle Start/Stop.
Multi-chromatic button:
Firmredlight:machinelling/heating;
Flashingredlight:alarmsignal(checkthecodeonthealarmchartchap.11);
Greenlight:machineready.Selectcycle;
Firmbluelight:machineinoperation;
Flashingbluelight:machineinstand-by,anti-freezefunction (see chap. 2.6).
B: Machine power ON/OFF (in stand-by only).
C:CycleSelection;
D:CycleSelection;
E:Cutout;
F:Cutout;
G: LCD Display
2.2 Machine start-up
2.2.1 Start-up
• Putthesurfaceltersinplace.
DONOTusetheappliancewithoutthelters.
• Shutthedishwasherdoor.
• Turnthewatervalve“open”.
A
B C D E F
G
Pict. 1
• TurnthemainpowerswitchON..
• Themachineison"STAND-BY".
In the "G" display, the message "STAND-BY" will appear.
• Turnthebutton"B".
The machine start will be active when the "A" button will light.
ON
STAND BY
EN
page 32
On the "G" display the "STAND-BY" message will be off.
The button “A” will light in white for a few seconds, while loading the software. After
loading is complete, the button will light in red.
Atthismoment,thewaterllingstarts.Thedisplay"G"will read "FILLING WATER".
Checktheproperpositioningoftheoverowpipe.
Oncethellingisdone,theheatingphasewillstartOnthe“G”displaywillappearthe
reading “HEATING”..”. The reading will stay until both boiler and wash-tank will reach
the set temperatures. During this process, the machine will not allow any cycle selection
or start
Afterthelling/heatingiscompleted,thekey“A”andthedisplay“G”willturngreen.
Ifthemachineisinstandardconguration,withhotwaterin-feed(50°C),withnoextra
power, the “A” button will light in green after some 20 min.
2.2.2 Operation
• Inserttheracklledwithobjectstowash.
• Selectthedesiredwashprogrambythekeys“C” and “D” or by keeping pressed the
“A”key.
Release the key when the selected program is selected.
To start the selected cycle press the “A” key.
The“A”keyandthe“G” display will turn blue.
• All wash-time long the display will read the wash-tank temperature and the boiler
OFF
57 C85 C
CYCLE 1 (3 min)
CYCLE 2 (6 MIN)
CYCLE 3 (9 MIN)
CYCLE 4 (12 MIN)
CYCLE SELECTION
OFF
57 C85 C
CYCLE 1 (3 MIN)
2 %
WASH
OFF
FILLING WATER
OFF
HEATING
temperature.
Below the temperatures indications line-bar is displayed to show the progression of the
wash-cycle.
At the end of the washing cycle, a hot rinse cycle will take place
Ablue/greenashingonthebutton"A" will indicate the "CYCLE ENDED".
boiler TANK
BOILER TANK
Table des matières
Autres manuels kromo Lave-vaisselle
