Kramer VM-3H2 Manuel utilisateur

VM-3H2 Quick Start

P/N:

2900- 301131QS

Rev:

Scan for full manual

VM-3H2 Quick Start Guide

This guide helps you install and use your VM-3H2 for the first time.

Go to www.kramerav.com/downloads/VM-3H2 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

VM-3H2 4K HDMI 2.0 1:3 DA

4 Rubber feet

1 Power supply (5V DC)

1 Quick start guide

Step 2: Mount VM-3H2

Install VM-3H2 using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/VM-3H2).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/VM-3H2).

•Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the

device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of

the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

•Maximum mounting height for the device is 2 meters.

Step 3: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-3H2.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-3H2.

Using third-party cables may cause damage!

Step 4: Connect power

Connect the power cord to VM-3H2 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

Step 5: Set DIP-switches

Set the DIP-switches according to your needs using the following table:

Programming mode

HDCP Input (MAC mode)

Force RGB

Lock Default EDID

DIP

OFF (up)

Normal mode

HDCP enabled

Force RGB

EDID not locked

ON (down)

Enable programming

HDCP disabled

Normal mode

EDID locked

Autres manuels pour VM-3H2

Table des matières

Autres manuels Kramer Changer

Kramer

Kramer SWT3-41-U Manuel utilisateur

Kramer

Kramer VS-41H Manuel utilisateur

Kramer

Kramer VS-211UHD Manuel utilisateur

Kramer

Kramer VP-436 Manuel utilisateur

Kramer

Kramer VS-211UHD Manuel utilisateur

Kramer

Kramer VP-61N Manuel utilisateur

Kramer

Kramer VP-720DS Manuel utilisateur

Kramer

Kramer VP-311DVI Manuel utilisateur

Kramer

Kramer VP-558 Manuel utilisateur

Kramer

Kramer VS-812 Manuel utilisateur

Kramer

Kramer VP-719DS Manuel utilisateur

Kramer

Kramer Wall Plate Series Manuel utilisateur

Kramer

Kramer VS-41H Manuel utilisateur

Kramer

Kramer VS-28 Manuel utilisateur

Kramer

Kramer VIA CONNECT PRO Manuel utilisateur

Kramer

Kramer DIP-31 Manuel utilisateur

Kramer

Kramer VS-21H-IR Manuel utilisateur

Kramer

Kramer DIP-31M Manuel utilisateur

Kramer

Kramer VM-37 Manuel utilisateur

Kramer

Kramer ProScale VP-728 Manuel utilisateur

Kramer

Kramer vs-162 Manuel utilisateur

Kramer

Kramer VS-2016 Manuel utilisateur

Kramer

Kramer ProScale VP-728 Manuel utilisateur

Kramer

Kramer VP-725N Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur