Kramer KRT-3 Manuel utilisateur

KRT-3 Quick Start (P/N: 2900-301022QS REV 1)

P/N:

2900- 301022QS

Rev:

Scan for full manual

KRT-3 Quick Start Guide

This guide helps you install and use your KRT-3 for the first time.

Go to www.kramerav.com/downloads/KRT-3 to download the latest user manual.

Step 1: Check what’s in the box

KRT-3 Cable Retractor

1 Quick start guide

3 M4x50 Fully threaded

screws for wood

1 M5x25 Allen bolt

Step 2: Get to know your KRT-3

Feature

Function

Retractor Enclosure

Contains the retractable cable mechanism.

Fixed Cable Female Connector

Connect to a male connector under the table.

Fixed Cable End

Short connector cable.

Screw Openings for Mounting Under the Table (3)

Use to attach the KRT-3 directly under a table.

Locking Allen Bolt

Turn to lock KRT-3 to the TBUS enclosure.

TBUS Installation Slot

Insert TBUS enclosure side into the slot to attach KRT-3 to a

TBUS.

Retracting Cable

Pull to connect to a connector above the table.

Retracting Cable Male Connector

Connect to a female connector.

KRT-3 is available for the following cables: HDMI (High Speed HDMI with Ethernet), VGA, audio (3.5mm),

LAN, USB, USB-C, and DisplayPort.

Step 3: Install KRT-3

Attaching KRT-3 to a Kramer TBUS

Use this procedure to mount KRT-3 onto the following Kramer TBUS units: TBUS-1AXL, TBUS-3xl, TBUS-4xl, TBUS-5xl,

TBUS-6xl and TBUS-10XL.

Before mounting the KRT-3 onto aTBUS,you need to configure and install the TBUS inner frame (including inserts and

power sockets) and mount the TBUS onto a table.

Remember to prepare an opening in the TBUS inner frame for the retracting cable connector (for example,

use the Kramer WCP pass-through insert).

To attach KRT-3 to a TBUS:

1. From under the table, slide the KRT-3 onto one of the side

walls of the TBUS.

Make sure that the fixed cable is directed downwards and

the retracting cable is directed upwards.

2. Use the appropriate Allen key to fix the KRT-3 by tightening

the Allen bolt firmly in place and pass the retracting cable

end through the cable pass-through bushing.

The KRT-3 is now firmly fixed in place.

Attaching KRT-3 (as a Standalone) to the Underside of a Table

The thickness of the table should be at least 18mm so as not to

damage the table. Kramer Electronics is not responsible for any

damage caused to the table.

To attach KRT-3 to the underside of a table:

1. Place the KRT-3 under the table in the desired location.

Make sure that the retracting cable faces the edge of the

table.

2. Pass the 3 M4x50 screws through the table screw openings

and tighten them to fix the retractor under the table.

Autres manuels pour KRT-3

Table des matières

Autres manuels Kramer Câbles et connecteurs

Kramer

Kramer MODULAR TBUS-1Axl Manuel utilisateur

Kramer

Kramer RTBUS-21 Manuel utilisateur

Kramer

Kramer FODPM Manuel utilisateur

Kramer

Kramer 676T Manuel utilisateur

Kramer

Kramer UTBUS-1XL Manuel utilisateur

Kramer

Kramer K-Able Box Manuel utilisateur

Kramer

Kramer WP-210A Manuel utilisateur

Kramer

Kramer RTBUS-24 Manuel utilisateur

Kramer

Kramer TBUS-4 Manuel utilisateur

Kramer

Kramer 612T Manuel utilisateur

Kramer

Kramer UTBUS-2XL Manuel utilisateur

Kramer

Kramer TBUS-100XL Manuel utilisateur

Kramer

Kramer WP-209 Manuel utilisateur

Kramer

Kramer WP-220E Manuel utilisateur

Kramer

Kramer WP-230 Manuel utilisateur

Kramer

Kramer 612T Manuel utilisateur

Kramer

Kramer WP-220 Manuel utilisateur

Kramer

Kramer WP-211DS Manuel utilisateur

Kramer

Kramer SV-301 Manuel utilisateur

Kramer

Kramer T6F-09 Manuel utilisateur

Kramer

Kramer KRT-4-LAN Manuel utilisateur

Kramer

Kramer TBUS-6 Manuel utilisateur

Kramer

Kramer RTBUS-28XL Manuel utilisateur

Kramer

Kramer TBUS-3 Manuel utilisateur

Manuels Câbles et connecteurs populaires d'autres marques

Philips

Philips SWA6310 Manuel utilisateur

StarTech.com

StarTech.com CRJ4550PK Manuel utilisateur

Nohau

Nohau EMUL-IP2K-PC Manuel utilisateur

Foxun

Foxun SX-SP144E-HD4K2K Manuel utilisateur

Philips

Philips SWA3305W Manuel utilisateur

opticis

opticis Stretch DVIM1-1P0x Manuel utilisateur

Volkswagen

Volkswagen VAS 6558A Manuel utilisateur

NEXIBO

NEXIBO N-13 Manuel utilisateur

CYP

CYP PU-1H3HBTL Manuel utilisateur

Allen-Bradley

Allen-Bradley 1784-u2dhp Manuel utilisateur

Global Caché

Global Caché Flex Link Blaster Manuel utilisateur

Hauppauge

Hauppauge USB-Live2 Manuel utilisateur

Fenix

Fenix MPSV 15 Manuel utilisateur

BEGA

BEGA 71 085 Manuel utilisateur

Tesla

Tesla HPWC Manuel utilisateur

GAMERON

GAMERON LUXURY TV CABLE Manuel utilisateur

molex

molex Milli-Grid Dual row 87568 Series Manuel utilisateur

Burndy

Burndy Continental Industries thermOweld CRE-7 Manuel utilisateur