Kramer VM-4UHD Manuel utilisateur
USER MANUAL
MODEL:
VM-4UHD
1:4 HDMI DA
P/N: 2900-300479 Rev 1
VM-4UHD – Contents
i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3Overview 4
3.1 Defining the VM-4UHD 1:4 HDMI DA 5
4Connecting the VM-4UHD 6
4.1 Acquiring an EDID 8
5Default EDID 9
6Technical Specifications 11
7Protocol 3000 12
7.1 Syntax 12
7.2 Kramer Protocol 3000 Commands 16
8Packet Protocol Structure 26
8.1 Using the Packet Protocol 26
8.2 Calculating the CRC 27
9Parameters 28
9.1 Stage 28
9.2 EDID Source 28
9.3 Signal Validation 28
9.4 HDCP Types 28
Figures
Figure 1: VM-4UHD 1:4 HDMI DA 5
Figure 2: Connecting the VM-4UHD 1:4 HDMI DA 7
VM-4UHD – Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast
range of problems that confront video, audio, presentation, and broadcasting
professionals on a daily basis. In recent years, we have redesigned and
upgraded most of our line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly
defined by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers
and Routers; GROUP 3: Control Systems; GROUP 4: Format/Standards
Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty
AV Products; GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and
Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and
Rack Adapters; GROUP 11: Sierra Video Products; GROUP 12: Digital
Signage; GROUP 13: Audio; and GROUP 14: Collaboration.
Congratulations on purchasing your Kramer VM-4UHD 1:4 HDMI DA, which is
ideal for the following typical applications:
Boardrooms and meeting rooms
Presentation and multimedia applications
Home theater
Rental and staging
2
VM-4UHD - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighbouring electrical appliances that may
adversely influence signal quality
Position your VM-4UHD away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the Kramer Electronics power supply that is
provided with the unit
Warning:
Disconnect the power and unplug the unit from the wall
before installing
VM-4UHD – Getting Started
3
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration
by requiring it to be collected and recycled. To comply with the WEEE
Directive, Kramer Electronics has made arrangements with the European
Advanced Recycling Network (EARN) and will cover any costs of treatment,
recycling and recovery of waste Kramer Electronics branded equipment on
arrival at the EARN facility. For details of Kramer’s recycling arrangements in
your particular country go to our recycling pages at
4
VM-4UHD - Overview
3 Overview
The Kramer TOOLS®VM-4UHD is a high-quality 1:4 HDMI distributor that takes
one HDMI input, equalizes and reclocks the signal and distributes it to four
identical outputs. The VM-4UHD distributes signals having resolutions up to
4Kx2K and including WUXGA and 1080p.
In particular, the VM-4UHD features:
A maximum data rate of 10.2Gbps (3.4Gbps per graphic channel)
HDMI support for Deep Color, x.v.Color™, Lip Sync, HDMI
Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC
HDCP compliance
Kramer Equalization & re-Klocking™ Technology that rebuilds the digital
signal integrity to travel longer distances
I-EDIDPro™ Kramer Intelligent EDID Processing™, an intelligent EDID
handling and processing algorithm that ensures Plug and Play operation
for HDMI systems
A default EDID for fast and efficient connection of the unit
The default EDID feature lets you connect the VM-4UHD without having to connect
a display to the output
3D pass-through
A USB port for firmware upgrading
Software support for Protocol 3000, EDID Designer and K-Upload
A compact TOOLS®enclosure with a 5V DC power source
VM-4UHD – Overview
5
3.1 Defining the VM-4UHD 1:4 HDMI DA
This section defines the VM-4UHD.
Figure 1: VM-4UHD 1:4 HDMI DA
#
Feature
Function
1
PROGRAM USB Connector
Connect to a PC to perform firmware upgrades (via
K-Upload) and work with the EDID Designer
K-Upload and EDID Designer can be downloaded
from our Web site at:
2
EDID SETUP Button
Press to capture the input EDID or select the default
EDID (see Section 4.1)
3
IN LED
Lights when an active input signal is detected
4
OUT 1-4 LEDS
Lights when an active output acceptor is detected
5
ON LED
Lights when the device is powered on
6
HDMI IN Connector
Connects to the HDMI source
7
HDMI OUT 1-4 Connectors
Connect to up to 4 HDMI acceptors
8
5V DC Connector
Connects to the 5V DC power supply
6
VM-4UHD - Connecting the VM-4UHD
4 Connecting the VM-4UHD
Always switch off the power to each device before connecting it to
your VM-4UHD. After connecting your VM-4UHD, connect its power
and then switch on the power to each device.
You do not have to connect all the inputs and outputs, connect only
those that are required.
Connect the VM-4UHD as illustrated in the example in Figure 2:
1. Connect an HDMI input source (for example, a DVD player) to the
HDMI IN connector.
2. Connect the four OUTPUT connectors to up to four HDMI acceptors, as
follows:
Not all outputs need to be connected.
HDMI OUT 1 connector to HDMI acceptor 1 (for example, an LCD
TV)
HDMI OUT 2 connector to HDMI acceptor 2 (for example, plasma
display 1)
HDMI OUT 3 connector to HDMI acceptor 3 (for example, plasma
display 2)
HDMI OUT 4 connector to HDMI acceptor 3 (for example, plasma
display 3)
3. Connect the 5V DC power adapter to the power socket unit and then
connect the adapter to the mains electricity (not shown in Figure 2).
The ON LED lights.
VM-4UHD – Connecting the VM-4UHD
7
Figure 2: Connecting the VM-4UHD 1:4 HDMI DA
Autres manuels pour VM-4UHD
1
Table des matières
Autres manuels Kramer Amplificateur
Kramer
Kramer 900 Manuel utilisateur
Kramer
Kramer DigiTOOLS VM-4HN Manuel utilisateur
Kramer
Kramer 901 Manuel utilisateur
Kramer
Kramer Tools VP-200Dxl Manuel utilisateur
Kramer
Kramer VM-30AV Manuel utilisateur
Kramer
Kramer VM-10HD I Series Manuel utilisateur
Kramer
Kramer VP-2XLK Manuel utilisateur
Kramer
Kramer VS-406 Manuel utilisateur
Kramer
Kramer VP-4 Manuel utilisateur
Kramer
Kramer VM-100YC Manuel utilisateur
Kramer
Kramer Pico TOOLS VM-2HD Manuel utilisateur
Kramer
Kramer 901 Manuel utilisateur
Kramer
Kramer VP-400 Manuel utilisateur
Kramer
Kramer VM-10xl Manuel utilisateur
Kramer
Kramer VM-4HD Manuel utilisateur
Kramer
Kramer TOOLS VP-200D Manuel utilisateur
Kramer
Kramer TP-202 Manuel utilisateur
Kramer
Kramer VM-2H2 Manuel utilisateur
Kramer
Kramer PT-102AN Manuel utilisateur
Kramer
Kramer VP-350 Manuel utilisateur
