Kramer 100 Manuel utilisateur

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

106

Mic Amplifier/DA

P/N: 2900-000074 Rev 2

106 – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Defining the 106 Mic Amplifier/DA 5

4Connecting the 106 6

5Technical Specifications 7

Figures

Figure 1: 106 Mic Amplifier/DA 5

Figure 2: Connecting the 106 Mic Amplifier/DA 6

106 - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer 106 Mic Amplifier/DA, which is ideal

for the following typical applications:

Public address systems

Presentation and multimedia audio distribution

106 - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer 106 away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

106 - Getting Started

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

106 - Overview

3 Overview

The 106 Mic Amplifier / DA is a high−quality distribution amplifier for balanced

mono microphone signals. It takes one dynamic or condenser microphone input

and distributes the signal to two high-level balanced mono line outputs, reaching

27Vpp (22dB).

The 106 features:

Three trimmers to adjust the LINE OUT audio level

A switch for selecting the type of microphone (condenser or dynamic)

Two balanced mono line outputs for power amplifiers

106 - Overview

3.1 Defining the 106 Mic Amplifier/DA

This section defines the 106.

Figure 1: 106 Mic Amplifier/DA

Feature

Function

LEVEL

LINE OUT 2 Trimmer

Adjusts the LINE OUT 2 audio level

Insert a screwdriver into the small hole and

carefully rotate it to adjust the audio level

LINE OUT 1 Trimmer

Adjusts the LINE OUT 1 audio level

MASTER Trimmer

Adjusts both the LINE OUT 1 and LINE OUT 2

audio levels

ON LED

Illuminates when receiving power

MIC IN Terminal Block

Connector

Connects to the microphone

TYPE COND./DYN Selector

Switch

Push to select the condenser microphone,

release to select the dynamic microphone

LINE OUT 1 Terminal Block

Connector

Connects to acceptor 1

LINE OUT 2 Terminal Block

Connector

Connects to acceptor 2

12V DC

+12V DC connector for powering the unit

106 - Connecting the 106

4 Connecting the 106

Always switch off the power to each device before connecting it to your

106. After connecting your 106, connect its power and then switch on

the power to each device.

To connect the 106 as illustrated in the example in Figure 2:

1. Connect a mono balanced microphone to the MIC IN terminal block

connector.

2. Connect the LINE OUT 1 terminal block connector to a power amplifier

and/or the LINE OUT 2 terminal block connector to a power amplifier.

3. Connect each power amplifier to a loudspeaker.

4. Connect the 12V DC power adapter to the power socket, and connect the

adapter to the mains electricity.

5. Adjust the audio level via LEVEL Trimmers, if required.

Use the LINE OUT 1 trimmer to adjust the line 1 output, use the LINE OUT 2 trimmer to

adjust the line 2 output, and use the MASTER trimmer to adjust both line outputs.

Figure 2: Connecting the 106 Mic Amplifier/DA

106 - Technical Specifications

5 Technical Specifications

INPUT:

1 microphone mono balanced on 3 pin terminal block

connector

OUTPUTS:

2 mono balanced line outputs on 3 pin terminal block

connectors

MAX. OUTPUT LEVEL:

27Vpp (22dBm)

BANDWIDTH:

>40kHz

S/N RATIO:

81dB

CONTROLS:

Mic. Type selector pushbutton, -14dB to +68dB LINE

OUT trimmers (MASTER trimmer at max.), +37dB to

+68dB master (LINE OUT trimmer at max.)

COUPLING:

Input: AC, Output: DC

AUDIO THD +NOISE:

0.18%

AUDIO 2nd HARMONIC:

0.16%

POWER CONSUMPTION:

12V DC, 132mA

OPERATING TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE:

-40° to +70°C (-40° to 158°F)

HUMIDITY:

10% to 90%, RHL non-condensing

DIMENSIONS:

12 cm x 7.5 cm x 2.5 cm (4.7" x 2.95" x 0.98", W, D, H)

WEIGHT:

0.3 kg (0.66lbs.) approx.

ACCESSORIES:

Power supply (12V, 500mA), mounting bracket

OPTIONS:

RK-3T 19” rack adapter

Specifications are subject to change without notice at http://www.kramerelectronics.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kramer Amplificateur

Kramer

Kramer VM-3AN Manuel utilisateur

Kramer

Kramer TOOLS 900xl Manuel utilisateur

Kramer

Kramer VM-2D Manuel utilisateur

Kramer

Kramer VP-300K Manuel utilisateur

Kramer

Kramer VM-50AN Manuel utilisateur

Kramer

Kramer VP-300 Manuel utilisateur

Kramer

Kramer VM-114H Manuel utilisateur

Kramer

Kramer TOOLS 900xl Manuel utilisateur

Kramer

Kramer TOOLS VM-2C Manuel utilisateur

Kramer

Kramer TOOLS 103YC Manuel utilisateur

Kramer

Kramer VP-103 Manuel utilisateur

Kramer

Kramer Tools VP-200Dxl Manuel utilisateur

Kramer

Kramer VM-2N Manuel utilisateur

Kramer

Kramer VM-20HD Manuel utilisateur

Kramer

Kramer 914 Manuel utilisateur

Kramer

Kramer PT-102A Manuel utilisateur

Kramer

Kramer VM-2H2 Manuel utilisateur

Kramer

Kramer VP-200AK Manuel utilisateur

Kramer

Kramer VP-200N-5 Manuel utilisateur

Kramer

Kramer VS-202YC Manuel utilisateur

Kramer

Kramer VM-10xl Manuel utilisateur

Kramer

Kramer VM-114H2C Manuel utilisateur

Kramer

Kramer VM-5HDxl Manuel utilisateur

Kramer

Kramer VM-5HDxln Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur