KOOZZO KD2T30 Manuel utilisateur
MODEL NO: KD2T30
UNDER CABINET RANGE HOOD
Press the light button (2) to turn the light on or off.
Light Functions:
This appliance features a steam auto-clean function for a better
clean. We recommend using this clean function every two
months or more frequently for heavier use. Water cup must be
used during auto-clean.
1.Remove the stainless steel grease filter.
2.Fill a cleaning mixture(water + neutral detergent) up to the
recommended water level mark and install it to the hood.
3.Press and hold the button (5) for 5 seconds to start the auto-
clean. This process will take 3 minutes. To stop the auto-clean,
press button (1) or (5).
grease filter
.
Remove the grease filter one by one by pushing down each latch. This will disengage the filter from the hood. Tilt the filter
downwards and remove.
Wash the filters carefully without bending them. Allow the filters to dry before refitting.
When refitting the filters, make sure the latches are visible from the outside.
To reinstall the grease filters, align rear filters in the hood. Push down the handles, align the filters and release. Make sure the
filters are securely engaged after assembly.
CAUTION: The surface of the LED lamps may be hot.
Be cautious when handling bulb replacements.
Autres manuels KOOZZO hotte de ventilation
