KonNad C2000-A2-SMD4240-AC5 Manuel utilisateur
Last updated: 2019-12-27
C2000-A2-SMD4240-AC5
User Manual
Wi-Fi ⇋ 2AI + 4DI + 4DO
0-10V / 16bit
Remote I/O Module — Wi-Fi I/O Module
SinoCon Co., Ltd.
Copyright Notice
©2000 - 2019 SinoCon Co., Ltd. All Rights Reserved.
Trademarks
The KonNaD logo is a registered trademark of SinoCon Co., Ltd. All other trademarks or registered marks in this
manual belong to their respective manufacturers.
Disclaimer
This document only provides information about KonNaD products. No license to any intellectual property rights is
granted by this document, including any intellectual property licenses, expressed or implied, or by any means.
SinoCon assumes no responsibility other than the liability stated by SinoCon in the terms and conditions of sale of
its products and SinoCon makes no warranties regarding the sale or use of KonNaD products, including the
suitability for the specific use of the products, and marketability, and SinoCon doesn't guarantee that it won't
infringe any patent, copyright or other intellectual property rights, etc.
Information in this document is subject to change without notice and does not represent a commitment on the
part of SinoCon.
Contact US
SinoCon Co., Ltd.
Address: 16th Floor, Tower A, Zhongyin Building, Caitian Road, Futian District, Shenzhen, China
Web: www.sinoconsys.com
Tel: +86 0755-88865168
C2000-A2-SMD4240-AC5 User Manual
3 / 12
SinoCon Co., Ltd. www.sinoconsys.com
C2000-A2-SMD4240-AC5 User Manual
4 / 12
SinoCon Co., Ltd. www.sinoconsys.com
1. Hardware Description
1.1. Specifications
Classification Parameter Specification
Wireless
Parameters
Wireless Standard 802.11b/g/n
Networking Mode AP/STA
Communication Mode 2.4G WiFi
Antenna Connector Standard SMA female antenna interface,<br
/>characteristic impedance 50Ω
Downstream
Serial Port
Serial Standard RS485
No. of Ports 1
Connector Terminal block
Cascade
Connection/Transparent
Transmission
RS485 cascade connection
Baud Rate 1200~115200bps
Communication Distance 1200m
Analog Input AI Channels 2
Connector Terminal block
Acquisition Range 0-10V
Acquisition Accuracy 1‰
Resolution 16 bit
Acquisition Characteristics Differential input
Acquisition Frequency 10Hz
Channel-to-Channel
Isolation
350VDC
Input Impedance 240Ω
C2000-A2-SMD4240-AC5 User Manual
5 / 12
SinoCon Co., Ltd. www.sinoconsys.com
Digital Input DI Channels 4
DI Connector Terminal block
Input Type Dry/Wet contact
DI Mode Logic level & pulse count
Digital Filtering Time Interval 6 sample periods
Counter Frequency 1kHz
Logic Logic 0: Open or input voltage < 3.8V; Logic 1: Short to
GND or input voltage ranges 4-24V
Digital Output DO Channels 4
DO Connector Terminal block
DO Type Form A
DO Mode Logic level & pulse
Contact Capacity 30V/1.6A
Power Input Voltage 9~27VDC
Current 80mA@12VDC
Other
Parameters
Support DNS ✓
Physical
Characteristics
Dimensions 75*105*30mm+171*37mm
Installation Din-rail or wall
Environmental
Limits
Operating Temperature -40℃ ~ 85℃
Storage Temperature -40℃ ~ 85℃
Ambient Relative Humidity 5% ~ 95% RH, non-condensing
Classification Parameter Specification
C2000-A2-SMD4240-AC5 User Manual
6 / 12
SinoCon Co., Ltd. www.sinoconsys.com
1.3. Indicators
Classification Indicator Description Meaning
Digital Input DIx Digital input
indicators (dry/wet
contact)
Steady on：Short to GND or input voltage more than
the threshold voltage
Off：Open or input voltage less than the threshold
voltage
Digital
Output
DOx Digital input
indicators
Steady on：On
Off：Off
Downstream
Serial Port
RXD RS485 data receive
indicator
Steady on：RS485 line fault, please check if the
positive and negative poles of 485 line are reversed
Flashing：RS485 receiving data
Off：RS485 no receiving data
TXD RS485 data transmit
indicator
Flashing：RS485 transmitting data
Off：RS485 no transmitting data
Power PWR Power indicator Steady on：Normal power supply
Off：No power or abnormal power supply, please
check if the voltage range is 9~27VDC
Ethernet LINK Network status
indicator
Steady on：Network connection enabled
Flashing：Transmit or receive data
Off：The network port is not plugged into the
network cable
Wireless
Parameters
Wi-Fi Wi-Fi mode
indicator
Steady on：AP mode
Slow flashing：STA connecting
Fast flashing：STA connected
C2000-A2-SMD4240-AC5 User Manual
8 / 12
SinoCon Co., Ltd. www.sinoconsys.com
1.4. Port Description
Classification Port Description Recommended
wiring
Analog Input +、- Positive analog input, Negative analog input RVV 2*0.5
Digital Input DIx Digital input RVV 2*0.5
DI.COM Dry and Wet contact mixed input common, not in common
ground with the power supply
RVV 2*0.5
Digital
Output
NO Digital output normally open RVV 2*1.0
COM Digital output common RVV 2*1.0
Upstream
Serial Port
+、-、
GND
RS485+, RS485-, GND（upstream） RVSP 3*0.5
Wireless
Parameters
AP/STA Short press to switch AP/STA and long press to restore
default settings
-
Power Input V+、V- Power supply input positive, power supply input negative RVV 2*1.0
C2000-A2-SMD4240-AC5 User Manual
9 / 12
SinoCon Co., Ltd. www.sinoconsys.com
Table des matières
