Konica Minolta DF-601 Manuel utilisateur

4582-7731-03

INSTALLATION MANUAL

DF-601

Applied Machine: C450

for Product Code 4037

Reverse Automatic Document Feeder

NOTE

•Before installing, be sure to unplug the power cord of the machine.

•Keep all packing materials out of the reach of children.

DF-601

– 1 –

■Unpacking the Reverse Automatic Document Feeder

Check that the following accessories are available in the box.

■Installing the Document Feeder

4. Using the two mounting screws furnished with the Document Feeder, tighten the

hinges to secure the Document Feeder in position.

NOTE

Check that the shoulder screws are fully tightened.

1 Shoulder screw ......................................................................................2

2 Mounting screw ......................................................................................2

3 Chart ......................................................................................................1

4 Installation Manual ...........................................................................1 set

1 2

4582U010AA 4582U011AA 4980U021AA

1. Remove the two hinge covers at two places

(one screw each).

NOTE

When the spacer is mounted, remove the

spacer.

4582IXC002DB

Spacer

2. Screw the shoulder screws furnished with

the Document Feeder into the holes in the

rear (one screw each).

4582IXC001DA

3. Place the Document Feeder in position.

NOTE

When installing the Document Feeder, hold

onto the upper and lower ends of the

Document Feeder in the vertical position as

shown on the left.

C4652U012AA

4582U001AD

5. Remove the plastic bag of the hookup cable.

6. Remove the cover and connect the hookup

cable to the machine.

4582U018AA

DF-601

– 2 –

■Adjusting the Document Feeding Tray Width

1. Plug the power cord into the power outlet

and turn on the machine.

2. Widen the width across the edge guides by

sliding them to their maximum width.

4582U013AA

3. Display the Service Mode screen.

(For details of how to display the Service

Mode screen, see the Service Manual.)

4. Touch “ADF.”

4037IXE295DA

5. Touch “Original Tray Width.”

4582IXE508DA

6. Touch “Max. Width” and then press the Start

key.

Check that “Adjustment Result” is “OK.”

4582IXE509DA

7. Narrow the width across the edge guides by

sliding them to their minimum width.

4582U014AA

8. Touch “Min. Width” and then press the Start

key.

Check that “Adjustment Result” is “OK.”

9. Touch “END.”

10. Touch “Exit” on the Service Mode screen.

4582IXE510DA

DF-601

– 3 –

■Checking and Adjusting Document Skew ■Checking and Adjusting the Document Feeding Tray Reference Posi-

tion

1. Place the chart furnished with the Document

Feeder in the document feeding tray (with

the side having an arrow facing up).

2. Set up the following functions:

•Select the tray in which A4 crosswise or Let-

ter crosswise paper is loaded.

•1-sided original 1-side copy

▲

4582U003AA

3. Press the Start key.

4. Check in which direction, A or B, the image

tilts on the copy fed out of the machine.

Specifications: Tilt 3 mm max.

* If the image tilts more than the specifications,

perform the following steps to make the

adjustment.

4582U006AC

5. Loosen the two front screws on the right

hinge.

If the gap A is wider than gap B, move the

Document Feeder toward the front.

If the gap B is wider than gap A, move the

Document Feeder toward the rear.

NOTE

Do not move the Document Feeder to the

frontmost or leftmost position.

6. Tighten the two screws.

7. Make the copy and check again.

4582U007AC

1. Place the chart furnished with the Document

Feeder in the document feeding tray (with

the side having an arrow facing up).

2. Set up the following functions:

•Select the tray in which A4 crosswise or Let-

ter crosswise paper is loaded.

•1-sided original 1-side copy

▲

4582U003AA

3. Press the Start key.

4. Fold the copy in half.

5. With reference to the crease, check to see if

the arrow is on the side of A or B.

Specifications: ±2 mm from the center

* If the deviation falls outside the specified

range, use the following procedure to make

an adjustment.

6. Loosen the screw (two on the front side and

three on the backside) on the document

feeding tray.

If the crease deviates on the side of A, move

the tray to the front.

If the crease deviates on the side of B, move

the tray to the rear.

7. Tighten the five screws.

8. Make the copy and check again.

4582U005AC

DF-601

– 4 –

■Adjusting the Document Stop Position

4. Touch “Sub Scanning Direction 1-Side.”

1. Display the Service Mode screen.

(For details of how to display the Service

Mode screen, see the Service Manual.)

2. Touch “ADF.”

4037IXE295DA

3. Touch “Auto Stop Position Adjustment.”

4582IXE508DA

4582IXE511DA

5. Place the chart furnished with the Document

Feeder in the document feeding tray (with

the side having an arrow facing up).

6. Press the Start key.

4582U003AA

7. Make sure that “Adjustment Result” is “OK.”

Then, touch “SET.”

4582IXE512DA

8. Touch “Sub Scanning Direction 2-Side.”

9. Place the chart furnished with the Document

Feeder in the document feeding tray.

NOTE

Make sure that the blank surface of the

chart faces up.

10. Press the Start key.

11. Check that “Adjustment Result” is “OK” and

then touch “SET.”

4582IXE513DA

12. Touch “Main Scanning Direction.”

13. Place the chart furnished with the Document

Feeder in the document feeding tray (with

the side having an arrow facing up).

14. Press the Start key.

15. Check that “Adjustment Result” is “OK” and

then touch “SET.”

16. Touch “END.”

17. Touch “Exit” on the Service Mode screen.

4582IXE514DA

DF-601

– 5 –

18. Turn OFF and ON the Main Power Switch.

NOTE

When displayed the Service Mode screen, be sure to turn off the main power after

exiting the Service Mode screen and wait for 10 seconds or more before turning on.

■Fixing the Stoppers

Loosen the stopper screws (two each on the right and left). Then, with the stoppers

raised, tighten the screws.

4582U008AB 4582U009AB

Autres manuels Konica Minolta Imprimante tout-en-un

Konica Minolta

Konica Minolta bizhub 554E Manuel utilisateur

Konica Minolta

Konica Minolta bizhub 223 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C754 Manuel utilisateur

Konica Minolta

Konica Minolta 8020 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C280 Series Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C360 Series Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 500 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub250 Manuel utilisateur

Konica Minolta

Konica Minolta PagePro 1390 MF Manuel utilisateur

Konica Minolta

Konica Minolta DP-85 Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB C250 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub 601 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub 215 Manuel utilisateur

Konica Minolta

Konica Minolta Magicolor 2480 MF Manuel

Konica Minolta

Konica Minolta bizhub C451 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C203 Series Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C754 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub PRO 958 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C452 Series Mode d’emploi

Konica Minolta

Konica Minolta Bizhub 362 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C3100P Manuel utilisateur

Konica Minolta

Konica Minolta Bizhub C3850 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub c3110 Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB C351 Instructions d'installation et d'entretien

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Brother

Brother MFC-J430w Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Canon

Canon ImageCLASS 2300 Manuel

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur

Copystar

Copystar CS 4551ci Manuel utilisateur