Kongsberg MS1000 Manuel utilisateur
901-80027001/1.1
MS1000 USB Remote Keypad
Operator manual
Revision
Issue
Data
Written by
Checked by
Approved by
1.0
11-Jul.-07
LL
GM,GC
MM
1.1
Aug 12, 2015
BC
GM
BC
The information contained in this document is subject to change without prior notice. Kongsberg
Mesotech Ltd. shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this document.
All rights reserved. No part of this work covered by the copyright hereon may be reproduced or
otherwise copied without prior permission from Kongsberg Mesotech Ltd.
© 2015 Kongsberg Mesotech Ltd.
901-80027001/1.1
Table of Contents
1Introduction............................................................................................................1
1.1 Specifications...........................................................................................................1
1.2 System Requirements ..............................................................................................1
2Installation..............................................................................................................2
3Operation................................................................................................................3
©2015 Kongsberg Mesotech Ltd.
901-80027001/1.1 1
1Introduction
The remote Keypad is an USB plug and play device used to operate the MS1000 software
application substituting a standard computer mouse and keyboard.
The remote Keypad consists of:
A joystick with two buttons that emulates mouse control
Softly backlighted and labelled keys suitable for dark environment
A removable rubber bracket provides mechanical protection
1.1 Specifications
Materials:
Keypad - Aluminium 6061-T6 / GLS Dynaflex G2711 TPE
Bracket - Santoprene TPE
Finish (Al):
Hard Anodize, Black MIL-A-8625 Type III
Dimensions:
Length 6.3" / 160 mm Width 3.17" / 88 mm Depth 1.57" / 40 mm
Weight:
1.3 lbs / 0.58 kg (without bracket) - 1.4 lbs / 0.66 kg (with bracket)
1.2 System Requirements
1 GHz Pentium III or faster recommended
512 Mbyte RAM or more recommended
One or more available USB ports
Windows XP Professional or higher
MS1000 v4.0 and above
USB Remote Keypad / Operator Manual
2 901-80027001/1.1
2Installation
The remote Keypad is a plug-and-play device. It requires connection to one of the host PC's
USB ports.
The remote Keypad can be used as a handheld or desktop device.
It can also be attached to a flat surface using the four #8-32 mounting holes on the back.
The following diagram shows remote Keypad back-view with dimensions of mounting holes:
©2015 Kongsberg Mesotech Ltd.
901-80027001/1.1 3
3Operation
The remote Keypad has a joystick with two buttons and 19 keys.
The joystick is a pressure-sensitive pointing device that positions the pointer:
the left-button emulates the mouse left-button action;
the right-button emulates the mouse right-button action.
Note! You can use the joystick to operate Windows applications.
The labelled keys activate the corresponding functionality in the operation of the MS1000
software.
Note! These keys are designed only for operating the MS1000 software, and therefore
can not be used for other applications.
MS1000 operation using the labelled keys
To:
Press:
Run all heads connected to the system
Stop all heads connected to the system
Select the next active head/display window
Pause/Resume the selected head
Reverse Scan direction for the selected head
Change Scan Mode for the selected head
Adjust Range for the selected head
USB Remote Keypad / Operator Manual
4 901-80027001/1.1
To:
Press:
Adjust Scan Speed for the selected head
Adjust Gain for the selected head
Adjust Sector Heading for the selected head
Adjust Sector Width for the selected head
Change image colour Palette for the selected head
Start Recording sonar data for all heads connected to the system
Start Playback of a recorded sonar data file
- END OF DOCUMENT -
Autres manuels pour MS1000
1
Table des matières
