Kogan ZENITH 2 Manuel utilisateur
ZENITH 2 FOLDABLE 4K
WI-FI DRONE
INCLUDING 2 BATTERIES
KAZEN2DRONA
2
Safety and warnings
3
Components list
4
Overview
5
Installation
5
Operation
7
App installation
13
Functions
14
Specifications
16
Troubleshooting
16
Notes
18
3
• Ensure to read all instructions and warnings in this user guide prior to first use. Retain
this user guide for future reference.
• Do not attempt to touch the drone whilst it is operating under any circumstances.
• This drone is not a toy and can be dangerous when used incorrectly. Follow all
instructions while operating. Disassembling or modifying the drone, operating
improperly, or being unfamiliar with this product may lead to an accident and possible
injuries.
• This drone is intended for use by persons aged 14 years or older. It is recommended that
people between 14-18 years operate the drone under adult supervision.
• Ensure the drone is always operated in a safe environment.
• It is recommended that you seek the assistance of an experienced drone pilot before
attempting to fly the drone for the first time. Asking a local expert is the best way to
properly assemble, setup, and fly your drone for the first time. It requires a certain
degree of skill to operate and is subject to normal wear and tear.
• Do not fly multiple drones simultaneously. Only one drone can be flown at any given
time.
• Do not allow the drone to fly out of visible range.
• Ensure the drone is flown at least 30 metres away from any people.
• Do not fly the drone over populated areas (for example, beaches, parks, and event
venues).
• Do not fly drones within 5.5km of airports. Many locations are considered
no-fly zones and you must ensure that you fly in areas that align with local laws and
ordinances.
• Do not record or photograph people without consent.
• Drones are prone to accidents and failures when piloted incorrectly. Operators are
responsible for their actions as well as any damage or injury caused by pilot error and
radio interference.
• If this drone or any of its components show any signs of damage, cease use
immediately and contact help.Kogan.com for support.
• Do not operate the drone in unsafe conditions and keep clear of heat sources, wires, or
electric power sources.
SAFETY & WARNINGS
WARNING: This drone may need to be registered. Check with your
local authority on the rules for registration.
4
• Do not fly the drone over areas affecting public safety or where there are emergency
operations taking place.
• This drone contains electrical components. Always keep this drone away from water
and other liquids. Exposure to water or moisture in any form can cause this drone to
malfunction resulting in a crash.
• This drone is composed of metal, plastic, electronic components, and other materials.
To avoid deformation or potential damage caused by high temperatures do not expose
it to sources of heat (fire, radiators, extended direct sunlight etc).
• Do not place heavy objects directly onto the drone or any of its components.
• Images used in this user guide are for reference only, actual product may differ slightly.
• During flight, always keep this drone away from people, high-rise buildings, high-
voltage wires and other potentially dangerous environments.
• Avoid flying in bad weather such as wind, rain and thunderstorm so as to ensure the
safety of people and property around the pilot.
• Always operate the drone in a way that it is within your own flight skills. Fatigue, the
effects of alcohol and other substances or improper operation will increase the
likelihood of accidents.
• The drone’s propellers rotate at a very high speed. To avoid personal injury, do not
touch any moving parts during operation.
5
Battery warnings
• If battery leakage occurs, avoid contact with your eyes or skin. If there is contact, wash
your eyes with water and seek medical care immediately.
• During charging, if you experience any abnormal smells, noise, or smoke, remove the
plug immediately any contact help.Kogan.com for support.
• Do not use third-party chargers.
• Do not overcharge the battery. Unplug the charger once fully charged.
• Do not charge the battery on inflammable object (carpet, timber floors, wooden
furniture, or on the surface of electro-conductive items).
• Always keep an eye on the battery when charging.
• Do not charge the battery if it has not had sufficient time to cool after use.
• The ambient temperature for charging is 0–40°C.
• To avoid a potential fire hazard, do not short, reverse the polarity, or puncture batteries.
Battery charging must be done under supervision and in a location out of reach of
children and pets.
• If the drone will not be used for an extended period, remove the batteries.
• Always dispose of batteries according to your local environmental authorities.
• If there is an increase in battery temperature after operation, cease use immediately
and allow it to cool down. Continuous use of this battery may cause it to expand,
deform, explode, or result in potential fire hazards.
6
Drone
Remote control
Spare battery
Spare propellers (x2)
USB charging cable
Screwdriver
User guide
COMPONENTS
7
Remote control
OVERVIEW
Speed control / (long press the button to enter the obstacle avoidance mode)
Headless mode
Tuning button
Left joystick
Power button
Take-off/land button
Rollover
Camera up
Camera down
Right
joystick
Capture button
Short press for
photo
Long press for
video for (3
seconds)
8
Install remote control batteries
1. Remove the screw on the battery cover and open the battery cover.
2. Noting the polarity markings (+/–), insert x3 AA (non-rechargeable) batteries into
the remote control.
3. Reattach the battery cover.
Charge the battery
1. Remove the battery from the underside of the drone.
2. Connect the USB charging cable to the charging port on the battery and a USB
power adapter (not supplied). Plug the power adapter into an electrical outlet.
3. During charging the indicator is RED. Once fully charged the indicator will turn
GREEN.
BEFORE FIRST USE
Notes:
• Do not mix old and new batteries together.
• Do not mix different types of batteries.
9
Install the battery
1. Install the charged battery in the battery compartment on the drone. Ensure to
align the battery with the power input socket on the drone.
2. Test the battery by pressing and holding the power button for 3 seconds to turn
the drone on. The drone indicators will turn on.
Attach your phone to the remote
1. Lift the bracket on top of the remote control and insert your phone.
2. The bracket will hold your mobile phone securely in place.
3. Follow the instructions in the “App Installation” section.
Power button
Note:
Do not remove the battery when the drone is powered on.
10
Connecting the remote to the drone
1. Press and hold the drone’s power button for 3 seconds and place the drone on a
flat, even surface.
2. The drone's indicators will begin flashing.
3. Press the power button on the remote. The remote will emit a “tick” sound.
4. The drone's indicator will turn solid. The remote is now connected to the drone.
Starting the drone
1. Move and hold the left and right joysticks on the remote control for 3 seconds in
the positions indicated (left joystick 7 o’clock, right joystick 5 o’clock).
2. The remote and drone are both now ready for take-off and operation.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Kogan Drone
Kogan
Kogan VULTUREX Manuel utilisateur
Kogan
Kogan KA4KOADRONA Manuel utilisateur
Kogan
Kogan KA4KGLXDRNA Manuel utilisateur
Kogan
Kogan VIPER-X Manuel utilisateur
Kogan
Kogan KAUFODRONEA Manuel utilisateur
Kogan
Kogan KAZENTDRONA Manuel utilisateur
Kogan
Kogan KALEDDRNYWA Manuel utilisateur
Kogan
Kogan KACAMDRONEA Manuel utilisateur
