Kogan KAHUTRCA801A Manuel utilisateur
HUNTING TRAIL CAMERA
20MP
KAHUTRCA801A
OVERVIEW
High Power Invisible LED
LED Indicator
Photo Sensor
Central PIR Sensor
Side PIR Sensor
Latch
Lens
Camera Quick Start Guide Mounting Strap USB Cable
8AA Batteries Depot
Display
Setup Buttons
Stand Knob Port
External Power Port
Micro SD Card Slot
USB Port
Mode Switch
IN THE BOX
If Using AA-Alkaline Batteries
1. Pull the gap lightly and open battery compartment.
2. Refer to the battery icons located on the inside of the battery compartment. Insert
the batteries according to the positive and negative battery icons.
3. Close the battery compartment tightly to ensure water and dust resistance.
Note:
Installing any AA battery in the wrong direction may cause the batteries to leak acid or
explode, causing camera failure and damage to the battery compartment.
INSTALLATION
If Using 6V DC Power Source
1. Remove the rubber port cap at the bottom of the camera. Plug a universal 6V DC
cord into the bottom port.
2. Run the cord to the side of the camera where there is a hook provided behind the
hinge of the camera door. This will support the power cord and take pressure off of
the connection point.
3. When not in use, replace the rubber port cap at the bottom of the camera to
protect the 6V DC universal plug-in port.
Memory Card Installation
1. Insert the Micro SD card with the contacts facing away. The Micro SD card should
slide in freely with little resistance. Continue pressing the card inward until you hear
a click. This means the Micro SD card is locked in place and ready for use.
2. To remove Micro SD card, press the card inwards to release.
Quick start
Slide the mode switch from OFF to TEST position to activate the camera and view the user
setup screen.
There is a control panel with 8 keys when you open the camera.
Operating Buttons
MENU Open the Settings menu using the MENU button.
REPLAY Press this button to start the replay mode.
Change to the manual recording mode for videos.
Change to the manual recording mode for taking photos.
SHOT Manually take a video or photo depending on the set recording mode.
Video recordings are ended by pressing the SHOT button.
Press it to start the video, press it again to stop.
OPERATION
Auto Recording Mode
After entering settings, slide the power switch to ON to enter auto recording mode. The
motion indicator will flash red for about 5 seconds, after which the camera will start working.
It will automatically take pictures or record videos when a person or animal enters into the
area of the PIR sensor.
Caution: To avoid potential false triggers due to temperature and motion disturbances, do
not aim the camera at a heat source (e.g. the sun, heated stone or metal) and remove
nearby tree branches and twigs. The ideal direction to aim at is an open place to the north
without nearby heat sources.
Advanced Settings
Camera Video Setup
Resolution
Sequence
ISO
Delay
Camera ID
Resolution
Video length
Record audio
Mode
Language
Time-lapse
TV mode
Date/Time
Timer
Password
Format
Default settings
Version
Note:
Generally, it is recommended to place the camera at a height of 1–2 metres.
Camera Menu Settings
Camera Sub menu Description
Resolution 20MP, 16MP, 12MP Photo size
Sequence 1/3/6/9 Number of photos taken sequentially
ISO Auto,100, 200, 400 Camera exposure level
Delay 1/5/10/30 sec/min Delay between shots
Camera ID 0-0-0
0-0-0 Camera ID
Video Menu Settings
Video Sub menu Description
Resolution 1080P, 720P, VGA Video size
Video length 10S, 30S, 60S, 90S Time length of video
Record audio ON, OFF Whether sound is captured or not
Table des matières
Autres manuels Kogan Appareil photo numérique
Kogan
Kogan KAKIDINCMRA Manuel utilisateur
Kogan
Kogan KARVSRCAMRA Manuel utilisateur
Kogan
Kogan KAS8C4W1TBB Manuel utilisateur
Kogan
Kogan VIPER-X 2 DRONE Manuel utilisateur
Kogan
Kogan KASGLSPYSDA Manuel utilisateur
Kogan
Kogan SMARTERHOME ANIMAL KABABYCAMGA Manuel utilisateur
Kogan
Kogan KHACT3BCAMA Manuel utilisateur
Kogan
Kogan KAUNCAMPINA Manuel utilisateur
Kogan
Kogan SMARTERHOME 2S Manuel utilisateur
Kogan
Kogan KACAM16SLVA Manuel utilisateur
