Kodak i800 Series Manuel utilisateur
for Kodak Scanners
Cleaning and Consumable Replacement Instructions
IManualnstruction
Versitec is a division of Cranel, Inc.
i800/i810/
i820/i830/i840
INSTRUCTIONMANUALFOR
KODAK
i800/i810/i820/i830/i840 Scanner
Versitec 1- 888 - 722 - 6548 www. versitec.com
Step One: Cleaning the Paper Path...........................2 - 3
Step Two: Cleaning the UpperTransport area............3 - 6
Step Three: Cleaning the VerticalTransport area........6 - 8
Step Four: Cleaning the Transport area...................8 - 10
Step Five: Cleaning the Printer and Patchhead......10 - 11
Step Six: Cleaning the Imaging Guides ................12 - 13
I. i800 Scanner Maintenance
II. i800 Maintenance and Replacing Procedures
Step One: ReplacingthefeedModule& feed
Module Tires............................................14
Step Two: Replacing the feed Module ....................14 - 15
Step Three: Replacing the feed Module Tires.........15 - 17
Step Four: Separation Roller and Tires........................ 18
Step Five: Replacing the separation Rollers ..........18 - 19
Step Six: Replacing the separation Roller Tires .............19
Step Seven: Changing the Separation Pad............19 - 20
Step Eight: Cleaning the feed Module Tires &
Separation Roller Tires ....................20 - 21
TABLE OF CONTENTS
Versitec 1- 888 - 722 - 6548 www. versitec.com 1
Cleaning the paper path
Thischapterprovidescleaningandreplacementproceduresfor
yourscanner. Forbestscanner performancecleanthe areas
outlinedinthischapterevery8-hourshift,unlessotherwisenoted.
Additionalmaintenancesupplies canbeorderingbycallingDI
SupplyorthroughyourKodakReseller.Foralistofavailable
supplies,see thesection entitled,“Ordering Supplies”attheendof
thischapter.
See Chapter 3, Operator Control Panel Functions, for procedures.
Thepaperpathshouldbecleaned witha PaperPath Cleanerfed
several timesthrough thetransport.Toclean thepaperpath:
1 Removethe wrappingfrom thePaperPath Cleaner.
2 Adjustthe feederguides tothewidestposition.
3 Runthe scannerincount-only mode.
IMPORTANT
Allcleaning suppliescanbe disposedofin yournormal
wastemanagementsystem,unlessotherwise noted.
Usethegreenhandles whenaccessing scanner
components.
I. ii
ii
i800800
800800
800 MaintenanceMaintenance
MaintenanceMaintenance
Maintenance
2 Versitec 1- 888 - 722 - 6548 www. versitec.com
Versitec 1- 888 - 722 - 6548 www. versitec.com 3
3 Feed the cleaning sheet (adhesive side up) in the landscape
orientation several times through the transport.
4Feed the cleaning sheet (adhesive side down) in the landscape
orientation several times through the transport.
When a cleaningsheetgets dirty,discard it andusea new one.
NOTE:
Cleaning the upper transport area
Followthe stepsbelow tocleantheuppertransport area:
1Open the top cover.
4 Versitec 1- 888 - 722 - 6548 www. versitec.com
3 Grasp the end of the lower imaging guide and slowly
pull it straight out.
2 Openthe bi-fold door.
4 Place the lower imaging guide on a clean surface.
5 Grasp the end of the upper imaging guide and slowly
pull it straight out.
Versitec 1- 888 - 722 - 6548 www. versitec.com 5
6 Place the upper imaging guide on a clean surface.
To avoidgettinganydebris(from thecleaning process)onthe
imagingguides, theywill bereinstalled afterthescanneris
thoroughlycleaned.
NOTE:
7 Release the top turn baffle.
8 Vacuum the area.
9 Close the top turn baffle.
Topturn
baffle
Exit
transport
plate
Cleaning the vertical
transport area
6 Versitec 1- 888 - 722 - 6548 www. versitec.com
10 Lift and hold the exit transport plate and vacuum.
11 Lower the exit transport plate.
Followthe stepsbelow tocleantheverticaltransport area:
1 Grasp the vertical transport plate and pull it down until it stops.
Versitec 1- 888 - 722 - 6548 www. versitec.com 7
2 Slide the horizontal baffle plate out and vacuum inside the housing.
Document
sensors
Horizontal
baffle plate
Black strip
4 Clean the document sensors.
5 Slide the horizontal baffle plate back in place.
6 Vacuum the floor of the lower transport area.
3 With a soft cloth, wipe the document sensors and the black strip on
the horizontal baffle plate.
IMPORTANT
Whenvacuuming thescanner,be careful
notto scratch thesensors.
Autres manuels pour i800 Series
3
Ce manuel convient aux modèles suivants
4
Autres manuels Kodak Scanner
Kodak
Kodak PS50 Series Manuel utilisateur
Kodak
Kodak Digital Science 9500 Mode d'emploi
Kodak
Kodak Scanmate i920 Manuel utilisateur
Kodak
Kodak i30 Mode d'emploi
Kodak
Kodak I640 - Document Scanner Manuel utilisateur
Kodak
Kodak i3000 Series Manuel utilisateur
Kodak
Kodak Ngenuity 9090DB Manuel utilisateur
Kodak
Kodak Digital Ice Technology Manuel utilisateur
Kodak
Kodak i80 Instructions de montage
Kodak
Kodak i1400 Series Manuel utilisateur
Kodak
Kodak I5X50 SERIES Manuel utilisateur
Kodak
Kodak SLIDE N SCAN Manuel utilisateur
Kodak
Kodak S3120 Max Manuel utilisateur
Kodak
Kodak Point-of-Care CR 120 System Instructions d'installation
Kodak
Kodak i1220 Plus Manuel
Kodak
Kodak Scanmate i1120 Instructions d'utilisation
Kodak
Kodak Scanmate i1120 Manuel utilisateur
Kodak
Kodak I1310 - Document Scanner Manuel utilisateur
Kodak
Kodak Mini Digital Film Scanner Manuel utilisateur
Kodak
Kodak I1440 - Document Scanner Manuel utilisateur
