Kodak Pixpro s-1 Manuel utilisateur

User Manual

Declaration of Conformity

Responsible Party: JK Imaging Ltd.

Address: 1411 W. 190th Street, Suite 550, Gardena, CA 90248, USA

Company Website: www.kodakpixpro.com

INDUSTRY CANADA

This device complies with Canadian RSS-210.

This device complies with Industry Canada license-exempt RSS standard (s).

Operation is subject to the following two conditions: (1) this device may not cause interference,

and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Radiation Exposure Statement:

The product comply with the Canada portable RF exposure limit set forth for an uncontrolled

environment and are safe for intended operation as described in this manual. The further RF

exposure reduction can be achieved if the product can be kept as far as possible from the user

body or set the device to lower output power if such function is available.

Before You Start

For Customers in Europe

This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection

of electrical waste and electronic equipment in the European countries. Please do

not throw the equipment into domestic refuse. Please use the return and collection

systems available in your country for proper, safe disposal of this product.

"CE" mark indicates that this product complies with the European requirements for

safety, health, environment and customer protection. "CE" marked cameras are

intended for sales in Europe.

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive 1999/5/

EC. The following test methods have been applied in order to prove presumption of

conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

- EN 60950-1: 2006+A11:2009 +A1:2010 +A12:2011

Safety of Information Technology Equipment

- EN 62311: 2008/ Article 3(1) (a) and Article 2 2006/95/EC

Assessment of electronic and electrical equipment related to human exposure

restrictions for electromagnetic elds (0 Hz-300 GHz) (IEC 62311:2007 (Modied))

- EN 300 328 V1.7.1: 2006

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband

Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM

band and using spread spectrum modulation techniques; Harmonized EN covering

essential requirements under article 3.2 of the R&TTE Directive.

- EN 301 489-1 V1.9.2: 2008

Electromagnetic compatibility and Radio Spectrum Matters (ERM); Electro Magnetic

Compatibility (EMC) standard for radio equipment and services; Part 1: Common

technical requirements.

- EN 301 489-17 V2.2.1: 2012

Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic

Compatibility (EMC) standard for radio equipment and services; Part 17: Specic

conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance

RLAN equipment.

For Customers in the U.S.A.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one of

the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modications not expressly approved by the party responsible

for compliance could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Radiation Exposure Statement:

The product comply with the FCC portable RF exposure limit set forth for an uncontrolled

environment and are safe for intended operation as described in this manual. The further RF

exposure reduction can be achieved if the product can be kept as far as possible from the user

body or set the device to lower output power if such function is available.

About this Manual

Thank you for purchasing the KODAK PIXPRO Compact System Camera. Please carefully

read this manual and keep it well for future reference.

JK Imaging Ltd. reserves all rights of this document. No part of this published manual may

be reproduced, transmitted, transcribed, stored in a retrieval system or translated into

any language or computer language, in any form, by any means, without the prior written

permission of JK Imaging Ltd..

All trademarks mentioned in this manual are used for identication purposes only and are

properties of their respective owners.

This manual is to introduce you how to operate this KODAK PIXPRO Compact System

Camera. JK Imaging Ltd. has tried its utmost to ensure the correctness of all contents here,

but reserves the right to modify. All of these contents are subject to change without prior

notice.

Throughout this manual, the following symbols are used to help you locate information

quickly and easily:

Indicates useful information.

Indicates precautions are to be taken while operating the camera.

In introducing you how to operate this camera, the following symbols may appear to

facilitate your understanding:

「Item properties」: The optional properties in the camera interface are indicated by the

symbol「」.

Safety Notes

Safety notes for this camera

Do not drop the camera or allow it to hit

solid objects.

Do not disassemble or repair this camera

by yourself.

To prevent the camera from being

damaged by moisture, do not use or store

the camera in very humid environments,

such as in rain or near bodies of water.

Do not use or store the camera in dusty

places or on a beach to prevent dust or

sand from entering the camera, causing

possible damage to it.

Do not use or store the camera in a hot

environment or under direct sunlight.

Do not use or store the camera near a

powerful magnetic eld, for example near

a magnet or transformer.

Turn the camera off, remove the battery

and the memory card, and dry it within

24 hours if water accidentally comes in

contact with the camera.

When you take the camera from a

cold place to a warmer environment,

condensation may occur. Please wait for

a reasonable period of time before you

turn it on.

Before you remove the battery and

memory card, the camera should be

turned off.

In demounting the lens, the image sensor

will be exposed. To avoid scufng, please

don't touch the image sensor.

Do not place ngers in the bayonet of

camera. As the components of image

sensor are precise, failures or damages

may be caused.

In cleaning the camera body, please don't

use corrosive cleaning agents or those

with alcohol or organic solvent.

Advise to use soft lens cloth to regularly

clean the camera's body and lens mount.

If this camera is not in use for a long time,

please keep it in a dry and clean condition.

Our company will not pay compensation

for any failure of playback of pictures or

videos caused by improper operation.

Safety notes for battery

Please use the battery with the same

type as the attached.

Please use the attached charger to

charge the battery.

If the liquid leaking from the battery

contacts with your skin, please

immediately ush with water and seek

medical treatment. If the liquid leaks into

the camera, please contact the retailer.

Please dispose the wasted battery

in accordance with local (national or

regional) regulations.

To prevent the battery from being

damaged, do not drop the battery or allow

it to hit solid objects or to be scratched by

the objects.

Do not let the battery come in contact

with metal objects (including coins) to

avoid short circuiting, discharging,

excessive heat, or possible leakage.

Do not attempt to disassemble the

battery.

Do not expose the battery to water.

Always keep the battery contacts dry.

Do not heat the battery or throw it into a

re to avoid a possible explosion.

Do not store the battery in a hot

environment or in direct sunlight.

If an overheating happens during

charging or use, please immediately stop

charging or using and then take out the

battery with care in shutdown mode to

wait it for cooling.

If it is not used for a long time, please

remove the battery for proper keeping.

In a colder environment, the performance

of the battery could be noticeably

reduced.

When you install the battery, install it

according to the positive and negative

markings on the battery compartment.

Never force it into the battery

compartment.

Do not modify the name of the les or

folders of the memory card using your

PC. Modifying the le names may cause

the les to not be recognized on the

camera or a possible error may occur.

A photo taken with the camera will be

stored in the folder that is automatically

generated on the memory card. Do not

store photos that are not taken using

this camera in these folders as the

pictures cannot be recognized during the

playback.

When you insert a memory card, make

sure the notch of the card matches the

markings on the top of the card slot.

Safety notes for memory card

We suggest buying only well-known,

name brand memory cards to ensure

peak performance.

Format the memory card using the

camera before you use it or insert a new

one.

Do not make the memory card fall off

from high places or hit by heavy objects

to prevent damaging it.

Do not attempt to disassemble or repair

the memory card.

Do not expose the memory card to water.

Always keep it dry.

Do not remove the memory card when

the camera is turned on. Otherwise, the

memory card could be damaged.

Do not directly edit the data on the

memory card. Copy the data to your PC

before you edit them.

When the camera is stored for a long

period of time, be sure to download your

photos and remove the memory card.

Store it in a dry environment.

Attentions for Use of Lens

Remove dirt and dust on the front and

rear lens caps before and after use.

Wipe the lens using professional lens

cleaning paper.

To avoid scratching the mount, do

not mount the lens at an angle to the

camera.

To protect the lens surface, use the lens

cap when you are not using the lens.

Mount or remove the lens in a place with

little dust.

After the lens is removed from the

camera, install the front and rear lens

caps and place it with the bottom facing

upwards to avoid scratches to the

surface and contacts.

Be careful not to stain or damage the

contacts.

Do not expose the camera lens to direct

sunlight for long periods of time.

Do not place the product where it can be

reached by infants and children.

When you do not use the lens for a long

period of time, store it in a dry and clean

place.

Other Safety Notes

Do not disconnect the power or turn the

camera off during the update process.

Doing so may cause incorrect data to be

written and the camera may not power on

later.

Do not hang the neck strap of the camera

around the neck of a child.

When using your camera on an airplane,

observe the relevant rules specied by

the airline.

Due to the limitations of manufacturing

technology, the LCD screen may have a

few dead or bright pixels. These pixels do

no effect the quality or performance of the

camera, photos or video.

Do not expose the LCD screen to water.

In a humid environment, only wipe it with

a soft and dry cleaning cloth.

If the LCD screen is damaged and the

liquid crystal comes into contact with

your skin, wipe your skin with a dry cloth

immediately and rinse it with clean water. If

liquid crystal comes into contact with your

eyes, wash them with clean water at least

for 15 minutes and seek immediate medical

attention. If you accidentally swallow liquid

crystal, rinse your mouth immediately and

seek medical attention.

Autres manuels pour pixpro s-1

Table des matières

Autres manuels Kodak Appareil photo numérique

Kodak

Kodak PIXPRO AZ401 Manuel utilisateur

Kodak

Kodak AFi 10 Manuel utilisateur

Kodak

Kodak EasyShare M1073 IS Manuel de service

Kodak

Kodak EASYSHARE C603 Manuel utilisateur

Kodak

Kodak Smile Manuel utilisateur

Kodak

Kodak C713 - EASYSHARE Digital Camera Manuel utilisateur

Kodak

Kodak M1093 - EASYSHARE IS Digital Camera Manuel utilisateur

Kodak

Kodak Digital Camera Manuel utilisateur

Kodak

Kodak C613 - EasyShare 6.2MP Digital Camera Manuel utilisateur

Kodak

Kodak C433 - Easyshare Zoom Digital Camera Manuel utilisateur

Kodak

Kodak easyshare p880 Manuel utilisateur

Kodak

Kodak P712 - Easyshare 7.1MP Digital Camera Manuel utilisateur

Kodak

Kodak PIXPRO FZ51 Manuel utilisateur

Kodak

Kodak DC265 Manuel utilisateur

Kodak

Kodak EASYSHARE M52 Manuel utilisateur

Kodak

Kodak CX7430 - EASYSHARE Digital Camera Manuel utilisateur

Kodak

Kodak PALM m500 Manuel utilisateur

Kodak

Kodak EASYSHARE MD30 Manuel de service

Kodak

Kodak Z1085 - Easyshare Is Zoom Digital Camera Manuel utilisateur

Kodak

Kodak EasyShare V610 Manuel utilisateur

Kodak

Kodak PIXPRO FZ42 Manuel utilisateur

Kodak

Kodak PIXPRO AZ362 Manuel utilisateur

Kodak

Kodak PIXPRO FZ41 Manuel utilisateur

Kodak

Kodak EASYSHARE C183 Manuel de service

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur

Kodak pixpro s-1 Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques