Kodak PIXPRO AZ652 Manuel utilisateur

KODAK PIXPRO AZ652

DIGITAL CAMERA

User Manual

Declaration of Conformity

Responsible Party: JK Imaging Ltd.

Address: JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA

Company Website: kodakpixpro.com

INDUSTRY CANADA

This device complies with Canadian RSS247.

This device complies with Industry Canada license-exempt RSS standard (s). Operation

is subject to the following two conditions: (1) this device may not cause interference

and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Radiation Exposure Statement:

This product complies with the Canadian portable RF exposure limit set forth for an

uncontrolled environment and is safe for intended operation as described in this manual.

Additional RF exposure reduction can be achieved if the product can be kept as far as

possible from the user body or set the device to lower output power if such function is

available.

BEFORE YOU START

For Customers in Europe

This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection

of electrical waste and electronic equipment in the European countries. Please do

not throw the equipment into domestic refuse. Please use the return and collection

systems available in your country for proper, safe disposal of this product.

“CE” mark indicates that this product complies with the European requirements

for safety, health, environment and customer protection. “CE” marked cameras are

intended for sales in Europe.

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive

2014/53/EU. The following test methods have been applied in order to prove

presumption of conformity with the essential requirements of the R&TTE Directive

2014/53/EU:

- EN 623681:2014

Safety of Information Technology Equipment

- EN 50566:2017

Product standard to demonstrate compliance of radio frequency ields from

handheld and body- mounted wireless communication devices used by the general

public (30 MHz — 6 GHz)

- EN 622092:2010/A1:2019

Human exposure to radio frequency ields from handheld and bodymounted

wireless communication devices — Human models, instrumentation, and

procedures

Part 2: Procedure to determine the speciic absorption rate (SAR) for wireless

communication devices used in close proximity to the human body (frequency

range of 30 MHz to 6 GHz)

- EN 300 328 V2.2.2 (201907)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband

transmission systems; Data transmission equipment operating in the 2.4GHz ISM

band andusing wide band modulation techniques; Harmonized EN covering the

essential requirements of article

- EN 301 4891 V2.2.3 (201911)

Electromagnetic compatibility and Radio Spectrum Matters (ERM); Electro

Magnetic Compatibility (EMC) standard for radio equipment and services; Part 1:

Common technical requirements.

- EN 301 489 -17 V3.2.4 (202009)

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic

Compatibility (EMC) standard for radio equipment; Part 17: Speciic conditions for

Broadband Data Transmission Systems

Hereby, Sintai Optical (Shenzhen) Co., Ltd, declares that this PIXPRO AZ652 is

in compliance with the essential requirements and other relevant provisions of

Directive 2014/53/EU.

Manufacturer: Sintai Optical (Shenzhen) Co., Ltd

Address: Qiwei Ind Sec, 1st, 2nd,& 3RD Bldg, Lisonglang Village, Gongming Town,

Bao’an District, Shenzhen, Guangdong, China

Batteries: Please dispose of used batteries at designated collection centers.

Packaging: Please follow local regulations for the recycling of packaging.

For Customers in the U.S.A.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modiications not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Radiation Exposure Statement:

This product complies with the FCC portable RF exposure limit set forth for an

uncontrolled environment and is safe for intended operation as described in this manual.

Additional RF exposure reduction can be achieved if the product can be kept as far as

possible from the user body or set the device to lower output power if such function is

available.

About this Manual

Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual

carefully and keep it in a safe place for future reference.

JK Imaging Ltd. reserves all rights of this document. No part of this published manual

may be reproduced, transmitted, transcribed, stored in a retrieval system or translated

into any language or computer language, in any form, by any means, without the prior

written permission of JK Imaging Ltd.

All trademarks mentioned in this manual are used for identiication purposes only and

are properties of their respective owners and holders.

This manual provides you with instructions on how to use your new KODAK PIXPRO

Digital Camera. Every effort has been made to ensure that the contents of this manual

are accurate; however JK Imaging reserves the right to make changes without notice.

Throughout this manual, the following symbols are used to help you locate

information quickly and easily:

Indicates useful information.

The following symbols may be used throughout this manual to facilitate your

understanding of how to operate the camera:

[Item properties] : The optional properties in the camera interface are indicated by the

[ ] symbol.

SAFETY NOTES

Safety Notes for this Camera

Do not drop the camera or allow it to

hit solid objects.

Do not attempt to disassemble or

repair the camera.

Do not use or store the camera in dusty

places or on a beach to help prevent

dust or sand from entering the camera,

causing possible damage.

Do not use or store the camera in a hot

environment or in direct sunlight.

Do not use or store the camera near

powerful magnetic ields, such as a

magnet or transformer.

Avoid touching the lens of the camera.

Do not expose the camera to direct

sunlight for a long period of time.

To prevent the camera from being

damaged by moisture, do not use

or store the camera in very humid

environments, such as in rain or near

bodies of water.

If water accidentally comes in contact

with the camera, turn the camera off

immediately, remove the battery and

the memory card and dry it completely

within 24 hours.

When you take the camera from a cold

environment to a warmer environment,

condensation may occur. Please wait

for a reasonable period of time before

you turn the camera on.

Before you remove the battery and

memory card, the camera should be

turned off.

When you clean the body of the

camera, do not use abrasive, alcohol-

based or organic cleansers or solvents.

Use a professional lens cleaning cloth

and appropriate cleaner to wipe and

clean the lens.

Download your photos and remove the

memory card when you are going to

store the camera for long periods of

time.

If this camera is not in use for a long

period of time, please keep it in a dry

and clean storage location.

Our company will not pay

compensation for any failure of

playback including: pictures or

videos damaged or unrecoverable by

improper operation.

Safety Notes for Battery

Please use a battery that is the same

type as the one included.

Please use the attached charger to

charge the battery.

If battery luid leaks inside the

camera, contact our customer service

department immediately. If battery

luid leaks onto your skin, rinse your

skin immediately with clean water and

seek immediate medical attention.

Disposal of used batteries should be

carried out in accordance with your

local (national or regional) regulations.

To prevent the battery from being

damaged, do not drop the battery or

allow it to hit solid objects or to be

scratched by foreign objects.

Do not let the battery come in contact

with metal objects (including coins)

to avoid short circuiting, discharging,

excessive heat or possible leakage.

Do not attempt to disassemble the

battery.

Do not expose the battery to water.

Always keep the battery contacts dry.

Do not heat the battery or throw it into

a ire to avoid a possible explosion.

Do not store the battery in a hot

environment or in direct sunlight.

If the battery overheats during

charging or use, stop charging or use

immediately. Turn off the product,

remove the battery carefully, and wait

until it cools down.

When the camera is stored for a long

period of time, remove the battery and

keep it in a safe, dry place that is not

accessible to infants and children.

In colder environments, the

performance of the battery could be

noticeably reduced.

When you install the battery, align the

battery markings according to the

positive and negative markings inside

the camera battery compartment.

Never force the battery into the battery

compartment.

Safety Notes for Memory Card

We highly suggest buying only well-

known, name brand memory cards

to ensure peak performance and

reliability.

Format the memory card using the

camera before you use it or insert a

new one.

Do not drop the memory card or

allow it to hit solid objects to avoid

damaging it.

Do not attempt to disassemble or

repair the memory card.

Do not expose the memory card to

water. Always keep it dry.

Do not remove the memory card when

the camera is turned on. Otherwise,

the memory card and photo/video iles

could be permanently damaged.

Do not directly edit the data on the

memory card. Copy the data to your

computer before you edit iles.

When the camera is stored for long

periods of time, be sure to download

your photos and remove the memory

card. Store the memory card in a dry

environment.

Do not modify the name of the iles

or folders of the memory card using

your computer. Modifying the ile

names may cause the iles to not

be recognized on the camera or a

possible permanent error may occur.

A photo taken with the camera

will be stored in the folder that is

automatically generated on the

memory card. Do not store photos

that are not taken using this camera in

these folders as the pictures cannot be

recognized during playback.

When you insert the memory card,

make sure the notch of the card

matches the markings on the top of

the camera card slot.

Other Safety Notes

Do not disconnect the power or turn the camera off during the update process. Doing

so may cause incorrect data to be written and the camera may not power on later.

Do not hang the neck strap of the camera around the neck of a child.

When using your camera on an airplane, observe the relevant rules speciied by the

airline and FAA regulations.

Due to the limitations of manufacturing technology, the LCD may have a few dead

or bright pixels. These pixels do no effect the quality or performance of the camera,

photos or video.

Do not expose the camera’s LCD to water. In a humid environment, only wipe it with a

soft, dry, cleaning cloth.

If the LCD is damaged and the liquid crystal comes into contact with your skin, wipe

your skin with a dry cloth immediately and rinse it with clean water. If liquid crystal

comes into contact with your eyes, wash them with clean water at least for 15 minutes

and seek immediate medical attention. If you accidentally swallow liquid crystal, rinse

your mouth immediately and seek medical attention.

Trademark Information

The terms HDMI, HDMI High-Deinition Multimedia Interface, HDMI Trade dress

and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing

Administrator, Inc.

WARNING

Altering, tampering or modifying the any parts of AZ652 camera are unauthorized

and will void the manufacturer’s warranty and “could” void Federal and/or State

Compliance.

Autres manuels pour PIXPRO AZ652

Table des matières

Autres manuels Kodak Appareil photo numérique

Kodak

Kodak Pixpro AZ651 Manuel utilisateur

Kodak

Kodak CX7310 - Easyshare Digital Camera Manuel utilisateur

Kodak

Kodak EasyShare C443 Manuel de service

Kodak

Kodak EasyShare CD43 Manuel utilisateur

Kodak

Kodak Retina automatic III Manuel utilisateur

Kodak

Kodak C613 - EasyShare 6.2MP Digital Camera Manuel utilisateur

Kodak

Kodak M763 - EASYSHARE Digital Camera Manuel de service

Kodak

Kodak C610 - EXTENDED GUIDE Manuel utilisateur

Kodak

Kodak SLICE Manuel utilisateur

Kodak

Kodak M790 Manuel utilisateur

Kodak

Kodak EASYSHARE C1550 Manuel de service

Kodak

Kodak pixpro s-1 Manuel utilisateur

Kodak

Kodak Leaf Aptus 54S Manuel de service

Kodak

Kodak DCS Pro SLR-C Manuel utilisateur

Kodak

Kodak V1233 - Easyshare 12.1MP Digital Camera Manuel utilisateur

Kodak

Kodak C610 - EXTENDED GUIDE Manuel de service

Kodak

Kodak EasyShare M893 IS Manuel de service

Kodak

Kodak DCS 330 - FIRMWARE VERSION 3.2 AND LATER Manuel utilisateur

Kodak

Kodak DC215 - 1MP Digital Camera Manuel utilisateur

Kodak

Kodak V1073 - EASYSHARE Digital Camera Manuel utilisateur

Kodak

Kodak Cd80 - Easyshare 10.2 Mp Manuel de service

Kodak

Kodak EasyShare P850 zoom Manuel utilisateur

Kodak

Kodak DIGITAL SCIENCE DC210 Plus Zoom Manuel d'utilisation et d'entretien

Kodak

Kodak LS755 - Easyshare Zoom Digital Camera Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur