Kodak PIXPRO AZ652 Manuel utilisateur

KODAK PIXPRO AZ652

DIGITAL CAMERA

User Manual

Declaration of Conformity

Responsible Party: JK Imaging Ltd.

Address: JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA

JK Imaging Europe, 71 Clarendon Road, Watford, WD17 1DS, UK

Company Website: kodakpixpro.com

INDUSTRY CANADA

This device complies with Canadian RSS210.

This device complies with Industry Canada license-exempt RSS standard (s).Operation

is subject to the following two conditions: (1) this device may not cause interference,

and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Radiation Exposure Statement:

This product complies with the Canadian portable RF exposure limit set forth for an

uncontrolled environment and is safe for intended operation as described in this manual.

Additional RF exposure reduction can be achieved if the product can be kept as far as

possible from the user body or set the device to lower output power if such function is

available.

BEFORE YOU START

For Customers in Europe

This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection

of electrical waste and electronic equipment in the European countries. Please do

not throw the equipment into domestic refuse. Please use the return and collection

systems available in your country for proper, safe disposal of this product.

“CE” mark indicates that this product complies with the European requirements

for safety, health, environment and customer protection. “CE” marked cameras are

intended for sales in Europe.

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive

2014/53/EU. The following test methods have been applied in order to prove

presumption of conformity with the essential requirements of the R&TTE Directive

2014/53/EU:

- EN 609501: 2006+A11:2009 +A1:2010 +A12:2011

Safety of Information Technology Equipment

- EN 50566: 2013

Product standard to demonstrate compliance of radio frequency ields from

handheld and body- mounted wireless communication devices used by the general

public (30 MHz — 6 GHz)

- EN 622092: 2010

Human exposure to radio frequency ields from handheld and bodymounted

wireless communication devices — Human models, instrumentation, and

procedures

Part 2: Procedure to determine the speciic absorption rate (SAR) for wireless

communication devices used in close proximity to the human body (frequency

range of 30 MHz to 6 GHz)

- EN 300 328 V1.9.1 : 2015

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband

transmission systems; Data transmission equipment operating in the 2.4GHz ISM

band andusing wide band modulation techniques; Harmonized EN covering the

essential requirements of article

- EN 301 4891 V1.9.2: 2011

Electromagnetic compatibility and Radio Spectrum Matters (ERM); Electro

Magnetic Compatibility (EMC) standard for radio equipment and services; Part 1:

Common technical requirements.

- EN 301 48917 V2.2.1:2012

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic

Compatibility (EMC) standard for radio equipment; Part 17: Speciic conditions for

Broadband Data Transmission Systems

Hereby, Sintai Optical (Shenzhen) Co., Ltd, declares that this PIXPRO AZ652 is

in compliance with the essential requirements and other relevant provisions of

Directive 2014/53/EU.

Manufacturer: Sintai Optical (Shenzhen) Co., Ltd

Address: Qiwei Ind Sec, 1st, 2nd,& 3RD Bldg, Lisonglang Village, Gongming Town,

Bao’an District, Shenzhen, Guangdong, China

Batteries: Please dispose of used batteries at designated collection centers.

Packaging: Please follow local regulations for the recycling of packaging.

For Customers in the U.S.A.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modiications not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Radiation Exposure Statement:

This product complies with the FCC portable RF exposure limit set forth for an

uncontrolled environment and is safe for intended operation as described in this manual.

Additional RF exposure reduction can be achieved if the product can be kept as far as

possible from the user body or set the device to lower output power if such function is

available.

About this Manual

Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual

carefully and keep it in a safe place for future reference.

JK Imaging reserves all rights of this document. No part of this published manual may

be reproduced, transmitted, transcribed, stored in a retrieval system or translated

into any language or computer language, in any form, by any means, without the prior

written permission of JK Imaging.

All trademarks mentioned in this manual are used for identiication purposes only and

are properties of their respective owners.

This manual will instruct you on how to operate the KODAK PIXPRO Digital Camera. JK

Imaging has tried its utmost to ensure the correctness of the user manual contents,

but reserves the right to modify as necessary. All of these contents are subject to

change without prior notice.

Throughout this manual, the following symbols are used to help you locate

information quickly and easily:

Indicates useful information.

In the instructions below, the following symbols may be used throughout this manual

on how to operate the camera. This is to facilitate better understanding.

「Item properties」：The optional properties in the camera interface are indicated by

the symbol「」.

SAFETY NOTES

Safety notes for this camera

Do not drop the camera or allow it to

hit solid objects.

Do not attempt to disassemble or

repair the camera.

Do not use or store the camera in dusty

places or on a beach to prevent dust

or sand from entering the camera,

causing possible damage to it.

Do not use or store the camera in a hot

environment or under direct sunlight.

Do not use or store the camera near a

powerful magnetic ield, for example

near a magnet or transformer.

Avoid touching the lens of the camera.

Do not expose the camera to direct

sunlight for a long period of time.

To prevent the camera from being

damaged by moisture, do not use

or store the camera in very humid

environments, such as in rain or near

bodies of water.

If water accidentally comes in contact

with the camera, turn the camera off,

remove the battery and the memory

card, and dry it within 24 hours.

When you take the camera from a

cold place to a warmer environment,

condensation may occur. Please wait

for a reasonable period of time before

you turn it on.

Before you remove the battery and

memory card, the camera should be

turned off.

When you clean the body of the

camera, do not use abrasive, alcohol-

based or organic cleaner.

Use a professional lens wiping cloth

and dedicated cleaner to wipe and

clean the lens.

Download your photos and remove the

memory card when you are going to

store the camera for a long period of

time.

If this camera is not in use for a long

time, please keep it in a dry and clean

condition.

Our company will not pay

compensation for any failure of

playback of pictures or videos caused

by improper operation.

Safety notes for battery

Please use a battery that is the same

type as the one included.

Please use the attached charger to

charge the battery.

If battery luid leaks inside the

camera, contact our customer service

department. If battery luid leaks onto

your skin, rinse your skin with clean

water and seek immediate medical

attention.

Disposal of used batteries should be

carried out in accordance with the

local (national or regional) regulations.

To prevent the battery from being

damaged, do not drop the battery or

allow it to hit solid objects or to be

scratched by the objects.

Do not let the battery come in contact

with metal objects (including coins)

to avoid short circuiting, discharging,

excessive heat, or possible leakage.

Do not attempt to disassemble the

battery.

Do not expose the battery to water.

Always keep the battery contacts dry.

Do not heat the battery or throw it into

a ire to avoid a possible explosion.

Do not store the battery in a hot

environment or in direct sunlight.

If the battery overheats during

charging or use, stop charging or use

immediately. Turn off the product,

remove the battery carefully, and wait

until it cools down.

When the camera is stored for a long

period of time, remove the battery

and keep it in a dry place that is not

accessible to infants and children.

In a colder environment, the

performance of the battery could be

noticeably reduced.

When you install the battery, install it

according to the positive and negative

markings on the battery compartment.

Never force it into the battery

compartment.

Safety notes for memory card

We suggest buying only well-known,

name brand memory cards to ensure

peak performance.

Format the memory card using the

camera before you use it or insert a

new one.

Do not drop the memory card or

allow it to hit solid objects to avoid

damaging it.

Do not attempt to disassemble or

repair the memory card.

Do not expose the memory card to

water. Always keep it dry.

Do not remove the memory card when

the camera is turned on. Otherwise,

the memory card could be damaged.

Do not directly edit the data on the

memory card. Copy the data to your

PC before you edit them.

When the camera is stored for a long

period of time, be sure to download

your photos and remove the memory

card. Store it in a dry environment.

Do not modify the name of the iles

or folders of the memory card using

your PC. Modifying the ile names may

cause the iles to not be recognized

on the camera or a possible error may

occur.

A photo taken with the camera

will be stored in the folder that is

automatically generated on the

memory card. Do not store photos

that are not taken using this camera in

these folders as the pictures cannot be

recognized during the playback.

When you insert a memory card, make

sure the notch of the card matches the

markings on the top of the card slot.

Other Safety Notes

Do not disconnect the power or turn the camera off during the update process. Doing

so may cause incorrect data to be written and the camera may not power on later.

Do not hang the neck strap of the camera around the neck of a child.

When using your camera on an airplane, observe the relevant rules speciied by the

airline.

Due to the limitations of manufacturing technology, the LCD may have a few dead

or bright pixels. These pixels do no effect the quality or performance of the camera,

photos or video.

Do not expose the LCD to water. In a humid environment, only wipe it with a soft and

dry cleaning cloth.

If the LCD is damaged and the liquid crystal comes into contact with your skin, wipe

your skin with a dry cloth immediately and rinse it with clean water. If liquid crystal

comes into contact with your eyes, wash them with clean water at least for 15 minutes

and seek immediate medical attention. If you accidentally swallow liquid crystal, rinse

your mouth immediately and seek medical attention.

Autres manuels pour PIXPRO AZ652

Table des matières

Autres manuels Kodak Appareil photo numérique

Kodak

Kodak EASYSHARE CX4200 Manuel utilisateur

Kodak

Kodak EasyShare CD22 Manuel utilisateur

Kodak

Kodak Leaf Aptus 54S Manuel de service

Kodak

Kodak Z710 - EASYSHARE Digital Camera Manuel utilisateur

Kodak

Kodak easyshare p880 Manuel utilisateur

Kodak

Kodak PIXPRO AZ362 Manuel utilisateur

Kodak

Kodak C875 - EasyShare 8MP Digital Camera Manuel utilisateur

Kodak

Kodak Pixpro X52 Manuel utilisateur

Kodak

Kodak ZD710 - EASYSHARE Digital Camera Manuel utilisateur

Kodak

Kodak Z981 - EXTENDED GUIDE Manuel de service

Kodak

Kodak pixpro fz201 Manuel utilisateur

Kodak

Kodak EasyShare M1073 IS Manuel utilisateur

Kodak

Kodak DCS Pro Back Plus Manuel

Kodak

Kodak EasyShare V530 Manuel utilisateur

Kodak

Kodak T20 - Advantix Auto Camera Manuel utilisateur

Kodak

Kodak PROFESSIONAL DCS 560 Manuel d'utilisation et d'entretien

Kodak

Kodak DC290 Manuel utilisateur

Kodak

Kodak KLIC-7001 Manuel utilisateur

Kodak

Kodak ZD710 - EASYSHARE Digital Camera Manuel utilisateur

Kodak

Kodak EasyShare Z1485 IS Manuel de service

Kodak

Kodak EASYSHARE CX4230 Manuel utilisateur

Kodak

Kodak EASYSHARE C1530 Manuel de service

Kodak

Kodak C713 - EASYSHARE Digital Camera Manuel utilisateur

Kodak

Kodak LS443 - Easyshare Zoom Digital Camera Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur