Kodak AZ901BK Manuel utilisateur

User Manual

KODAK

DIGITAL CAMERA

PIXPRO AZ901

ii 1

Declaration of Conformity

Responsible Party: JK Imaging Ltd.

Address: JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA

JK Imaging Europe, 71 Clarendon Road, Watford, WD17 1DS, UK

Company Website: kodakpixpro.com

INDUSTRY CANADA

This device complies with Canadian RSS210.

This device complies with Industry Canada license-exempt RSS standard (s).Operation

is subject to the following two conditions: (1) this device may not cause interference,

and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Radiation Exposure Statement:

This product complies with the Canadian portable RF exposure limit set forth for an

uncontrolled environment and is safe for intended operation as described in this manual.

Additional RF exposure reduction can be achieved if the product can be kept as far as

possible from the user body or set the device to lower output power if such function is

available.

BEFORE YOU START

For Customers in Europe

This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection

of electrical waste and electronic equipment in the European countries. Please do

not throw the equipment into domestic refuse. Please use the return and collection

systems available in your country for proper, safe disposal of this product.

“CE” mark indicates that this product complies with the European requirements

for safety, health, environment and customer protection. “CE” marked cameras are

intended for sales in Europe.

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the RED Directive 2014/53/

EU. The following test methods have been applied in order to prove presumption of

conformity with the essential requirements of the RED Directive 2014/53/EU:

- EN609501/A12:2011+A2:2013

Safety of Information Technology Equipment

- EN 62311:2008

Assessment of electronic and electrical equipment related to human exposure

restrictions for electromagnetic ields (0 Hz-300 GHz)

- EN 300 328 V2.1.1 (201611)

Wideband transmission systems; Data transmission equipment operating in the 2.4

GHz ISM band and using wide band modulation techniques

- EN 301 4891 V2.2.0 (201703)

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic

Compatibility (EMC) standard for radio equipment and services; Part 1: Common

technical requirements

- EN 301 48917 V3.2.0 (201703)

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic

Compatibility (EMC) standard for radio equipment; Part 17: Speciic conditions for

Broadband Data Transmission Systems

For SAR statement

A minimum separation distance of XX cm must be maintained between the user’s body

and the device, including the antenna during body-worn operation to comply with the RF

exposure requirements in Europe.

To compliance with RF Exposure requirements in Europe, third-party belt-clips, holsters

or similar accessories used by this device should not contain any metallic components.

The use of accessories that do not satisfy these requirements may not comply with RF

exposure requirements, and should be avoided.

Hereby, Sintai Optical (Shenzhen) Co., Ltd, declares that this PIXPRO AZ901 is

in compliance with the essential requirements and other relevant provisions of

Directive 2014/53/EU.

Manufacturer: Sintai Optical (Shenzhen) Co., Ltd

Address: Qiwei Ind Sec, 1st, 2nd,& 3RD Bldg, Lisonglang Village, Gongming

Town, Bao’an District, Shenzhen, Guangdong, China

Batteries: Please dispose of used batteries at designated collection centers.

Packaging: Please follow local regulations for the recycling of packaging.

For Customers in the U.S.A.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modiications not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Radiation Exposure Statement:

This product complies with the FCC portable RF exposure limit set forth for an

uncontrolled environment and is safe for intended operation as described in this manual.

Additional RF exposure reduction can be achieved if the product can be kept as far as

possible from the user body or set the device to lower output power if such function is

available.

About this Manual

Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual

carefully and keep it in a safe place for future reference.

JK Imaging Ltd. reserves all rights of this document. No part of this published manual

may be reproduced, transmitted, transcribed, stored in a retrieval system or translated

into any language or computer language, in any form, by any means, without the prior

written permission of JK Imaging Ltd..

All trademarks mentioned in this manual are used for identiication purposes only and

are properties of their respective owners.

This manual will instruct you on how to operate the KODAK PIXPRO Digital Camera.

JK Imaging Ltd. has tried its utmost to ensure the correctness of the user manual

contents, but reserves the right to modify as necessary. All of these contents are

subject to change without prior notice.

Throughout this manual, the following symbols are used to help you locate

information quickly and easily:

Indicates useful information.

In the instructions below, the following symbols may be used throughout this manual

on how to operate the camera. This is to facilitate better understanding.

「Item properties」：The optional properties in the camera interface are indicated by

the symbol「」.

SAFETY NOTES

Safety notes for this camera

Do not drop the camera or allow it to hit solid objects.

Do not attempt to disassemble or repair the camera.

Do not use or store the camera in dusty places or on a beach to prevent dust or sand

from entering the camera, causing possible damage to it.

Do not use or store the camera in a hot environment or under direct sunlight.

Do not use or store the camera near a powerful magnetic ield, for example near a

magnet or transformer.

Avoid touching the lens of the camera.

Do not expose the camera to direct sunlight for a long period of time.

To prevent the camera from being damaged by moisture, do not use or store the

camera in very humid environments, such as in rain or near bodies of water.

If water accidentally comes in contact with the camera, turn the camera off, remove

the battery and the memory card, and dry it within 24 hours.

When you take the camera from a cold place to a warmer environment, condensation

may occur. Please wait for a reasonable period of time before you turn it on.

Before you remove the battery and memory card, the camera should be turned off.

When you clean the body of the camera, do not use abrasive, alcohol-based or

organic cleaner.

Use a professional lens wiping cloth and dedicated cleaner to wipe and clean the lens.

Download your photos and remove the memory card when you are going to store the

camera for a long period of time.

If this camera is not in use for a long time, please keep it in a dry and clean condition.

Our company will not pay compensation for any failure of playback of pictures or

videos caused by improper operation.

Safety notes for battery

Please use a battery that is the same type as the one included.

Please use the attached charger to charge the battery.

If battery luid leaks inside the camera, contact our customer service department. If

battery luid leaks onto your skin, rinse your skin with clean water and seek immediate

medical attention.

Disposal of used batteries should be carried out in accordance with the local (national

or regional) regulations.

To prevent the battery from being damaged, do not drop the battery or allow it to hit

solid objects or to be scratched by the objects.

Do not let the battery come in contact with metal objects (including coins) to avoid

short circuiting, discharging, excessive heat, or possible leakage.

Do not attempt to disassemble the battery.

Do not expose the battery to water. Always keep the battery contacts dry.

Do not heat the battery or throw it into a ire to avoid a possible explosion.

Do not store the battery in a hot environment or in direct sunlight.

If the battery overheats during charging or use, stop charging or use immediately.

Turn off the product, remove the battery carefully, and wait until it cools down.

When the camera is stored for a long period of time, remove the battery and keep it in

a dry place that is not accessible to infants and children.

In a colder environment, the performance of the battery could be noticeably reduced.

When you install the battery, install it according to the positive and negative markings

on the battery compartment. Never force it into the battery compartment.

Safety notes for memory card

We suggest buying only well-known, name brand memory cards to ensure peak

performance.

Format the memory card using the camera before you use it or insert a new one.

Do not drop the memory card or allow it to hit solid objects to avoid damaging it.

Do not attempt to disassemble or repair the memory card.

Do not expose the memory card to water. Always keep it dry.

Do not remove the memory card when the camera is turned on. Otherwise, the

memory card could be damaged.

Do not directly edit the data on the memory card. Copy the data to your PC before

you edit them.

When the camera is stored for a long period of time, be sure to download your photos

and remove the memory card. Store it in a dry environment.

Do not modify the name of the iles or folders of the memory card using your PC.

Modifying the ile names may cause the iles to not be recognized on the camera or a

possible error may occur.

A photo taken with the camera will be stored in the folder that is automatically

generated on the memory card. Do not store photos that are not taken using this

camera in these folders as the pictures cannot be recognized during the playback.

When you insert a memory card, make sure the notch of the card matches the

markings on the top of the card slot.

Other Safety Notes

Do not disconnect the power or turn the camera off during the update process. Doing

so may cause incorrect data to be written and the camera may not power on later.

Do not hang the neck strap of the camera around the neck of a child.

When using your camera on an airplane, observe the relevant rules speciied by the

airline.

Due to the limitations of manufacturing technology, the LCD may have a few dead

or bright pixels. These pixels do no effect the quality or performance of the camera,

photos or video.

Do not expose the LCD to water. In a humid environment, only wipe it with a soft and

dry cleaning cloth.

If the LCD is damaged and the liquid crystal comes into contact with your skin, wipe

your skin with a dry cloth immediately and rinse it with clean water. If liquid crystal

comes into contact with your eyes, wash them with clean water at least for 15 minutes

and seek immediate medical attention. If you accidentally swallow liquid crystal, rinse

your mouth immediately and seek medical attention.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kodak Appareil photo numérique

Kodak

Kodak KB18 - 35 Mm Camera Manuel utilisateur

Kodak

Kodak Retinette Manuel utilisateur

Kodak

Kodak SMILE Classic Manuel utilisateur

Kodak

Kodak C182 - EASYSHARE Digital Camera Manuel de service

Kodak

Kodak EASYSHARE C1505 Manuel de service

Kodak

Kodak C310 - EASYSHARE Digital Camera Manuel utilisateur

Kodak

Kodak DC4800 - 3.1MP Digital Camera Manuel utilisateur

Kodak

Kodak Advantix Advantix Preview Manuel utilisateur

Kodak

Kodak PIXPRO FZ151 Manuel utilisateur

Kodak

Kodak EasyShare M1073 IS Manuel utilisateur

Kodak

Kodak M1063 - EASYSHARE Digital Camera Manuel utilisateur

Kodak

Kodak C700 - Advantix Zoom Camera Manuel utilisateur

Kodak

Kodak C122 - Easyshare Digital Camera Manuel utilisateur

Kodak

Kodak KC 50 Manuel utilisateur

Kodak

Kodak LS443 - Easyshare Zoom Digital Camera Manuel utilisateur

Kodak

Kodak DCS Pro Back Plus Manuel

Kodak

Kodak EasyShare DX6340 Manuel utilisateur

Kodak

Kodak KLIC-7006 Manuel utilisateur

Kodak

Kodak Pixpro AZ651 Manuel utilisateur

Kodak

Kodak Z710 - EASYSHARE Digital Camera Manuel utilisateur

Kodak

Kodak Retinette Mode d'emploi

Kodak

Kodak EASYSHARE MD55 Manuel de service

Kodak

Kodak Retina automatic III Manuel utilisateur

Kodak

Kodak Cd80 - Easyshare 10.2 Mp Manuel de service

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur