Kobold DUC-ZUWD Manuel utilisateur

DUC-ZUWD Quickstart

Prepare your wall thickness gauge /Keypad definition

The delivery is usually ready to use; batteries (AA).

Switch on / off Backlight on / off Scroll down /

decrease

Exit Menu / Select

Enter Calibration Scroll up/

Increase

3 steps to parameterize your wall thickness gauge

1. Please check if the sensor probe type is set correctly (standard type ‘N07’)

2. Make calibration using integrated calibration sample

3. Set value for speed of sound of your pipe material.

4. Place probe on the pipe and get reading for wall thickness

Please make sure to put some coupling grease on the sensor tip before measurement.

Calibration should be repeated each time you start new measurement.

Calibration should be done at speed of sound of 5920 m/s

Put some coupling grease (Magnalube) on the probe tip (Pic.1).

Put sensor on the integrated calibration sample (Pic.2) which you find in

the lowermost right corner of the instrument.

Press button . Display will show 4.00 mm. Remove the probe.

Your DUC-ZUWD is now calibrated. Now set the speed of sound of media

of pipe material. Press button (4x) to go to menu for setting of speed

of sound. (lowermost line, right corner), see pic.3.

The value can be changed by using buttons . Values for typical

materials can be obtained from the adjacent table. Put sensor tip on your pipe

and take readings from display, see pic.4.

Connect

the signal

cables of

the

transducer

to the

thickness

gauge

Calibration sample

Pic. 1

Pic. 2

Pic. 3

Pic. 4

The instruction manuals on our website www.kobold.com are always for currently manufactured

version of our products. Due to technical changes, the instruction manuals available online may not

always correspond to the product version you have purchased. If you need an instruction manual that

corresponds to the purchased product version, you can request it from us free of charge by email

(info.de@kobold.com) in PDF format, specifying the relevant invoice number and serial number. If you

wish, the operating instructions can also be sent to you by post in paper form against an applicable

postage fee.

Disposal

Note!

•Avoid environmental damage caused by media-contaminated parts

•Dispose of the device and packaging in an environmentally friendly manner

•Comply with applicable national and international disposal regulations and

environmental regulations.

Batteries

Batteries containing pollutants are marked with a sign consisting of a crossed-out garbage can

and the chemical symbol (Cd, Hg, Li or Pb) of the heavy metal that is decisive for the

classification as containing pollutants:

Cd1Hg2Pb3Li4

1. „Cd" stands for cadmium

2. „Hg" stands for mercury

3. „Pb" stands for lead

4. „Li" stands for lithium

Electrical and electronic equipment

Manufactured and sold by:

Kobold Messring GmbH

Nordring 22-24

D-65719 Hofheim

Tel.: +49 (0)6192-2990

Fax: +49(0)6192-23398

E-Mail: info.de@kobold.com

Internet: www.kobold.com

Version K02/0722

Table des matières

Autres manuels Kobold Instrument de mesure

Kobold

Kobold DAG-M3V Series Manuel utilisateur

Kobold

Kobold Heinrichs UMC3 Manuel utilisateur

Kobold

Kobold HND-R106 Manuel utilisateur

Kobold

Kobold OMS Manuel utilisateur

Kobold

Kobold MS Series Manuel utilisateur

Kobold

Kobold Heinrichs BGN Series Manuel utilisateur

Kobold

Kobold VKM Series Manuel utilisateur

Kobold

Kobold DON-L Series Manuel utilisateur

Kobold

Kobold Heinrichs TMU-W Series Manuel utilisateur

Kobold

Kobold KDF-2 Series Manuel utilisateur

Kobold

Kobold DVZ Manuel utilisateur

Kobold

Kobold OME Manuel utilisateur

Kobold

Kobold NBK-16 Manuel utilisateur

Kobold

Kobold NBK-19 Manuel utilisateur

Kobold

Kobold TIN-SS Manuel utilisateur

Kobold

Kobold DAG-A1V Manuel utilisateur

Kobold

Kobold DAG-S4V Series Manuel utilisateur

Kobold

Kobold NSC Manuel utilisateur

Kobold

Kobold DAG-M35 Series Manuel utilisateur

Kobold

Kobold REG Manuel utilisateur

Kobold

Kobold KAL-K Manuel utilisateur

Kobold

Kobold MAS Series Manuel utilisateur

Kobold

Kobold DAG-A1T Manuel utilisateur

Kobold

Kobold SWK Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur