Kobalt KWL 224-03 Manuel utilisateur
1
AB16882
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST,
Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
ITEM #0672832/0672826
LED WORK
LIGHT
MODEL #KWL 224-03
Français p. 9
2
TABLE OF CONTENTS
Product Specications .....................................................................................................2
Package Contents ...........................................................................................................3
Safety Information ...........................................................................................................4
Preparation......................................................................................................................5
Operating Instructions .....................................................................................................6
Care and Maintenance ....................................................................................................7
Troubleshooting...............................................................................................................8
Warranty ..........................................................................................................................8
PRODUCT SPECIFICATIONS
COMPONENT SPECIFICATION
Rated voltage 24 V d.c.
Head pivot 135°
Illumination 200 Lumen
3
PACKAGE CONTENTS
A
B
D
C
PART DESCRIPTION PART DESCRIPTION
A ON/OFF switch C Light head
B Transparent cover D Loop
WARNING
• Remove the tool from the package and examine it carefully. Do not discard the carton or any
packaging material until all parts have been examined.
• If any part of the tool is missing or damaged, do not attach the battery pack or use the tool until
the part has been repaired or replaced. Failure to heed this warning could result in serious injury.
4
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or operate
this product. If you have any questions regarding the product, please call customer service at
1-888-3KOBALT, 8 a.m. - 8 p.m., EST, Monday - Friday.
Know the Tool
To operate this tool, carefully read this manual and all labels afxed to the tool before using it.
Keep this manual available for future reference.
Important
This tool should be serviced only by a qualied service technician.
Read All Instructions Thoroughly
Specic Safety Warnings for LED Work Light
WARNING
• Read all safety warnings and all instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference
• Know your LED work light. Read the operator’s manual carefully. Learn the applications
and limitations, as well as the specic potential hazards related to this tool. Following this
rule will reduce the risk of electric shock, re or serious injury.
• Do not permit children to use the LED work light; it is not a toy.
• Do not stare into the LED work light. Avoid direct eye exposure. The LED work light can
cause ash blindness.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
• Disconnect the battery pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Use only with specically designated battery packs. Use of any other battery packs may
create a risk of injury and re.
• When a battery pack is not in use, keep it away from other metal objects like paper clips,
coins, keys, nails, screws or other small metal objects that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a re.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, ush with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or burns.
• Have your power tool serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
5
SAFETY INFORMATION
CAUTION
• Hot Surface.
• Risk of Burns - Do Not Touch.
• Risk of Fire - Keep Away From Combustible Materials.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
• When using electric appliances, basic precautions should always be followed, including the
following:
• Read all the instructions before using the appliance.
• To reduce the risk of injury, close supervision is necessary when an appliance is used near
children.
• Do not use outdoors.
• To reduce the risk of electrical shock, do not put the LED work light and battery pack in water or
other liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink.
• For use only with battery pack models KB 124-03, KB 224-03, KB 424-03 or KB 524-03.
• Use only the charger supplied by the manufacturer to recharge.
SAVE THESE INSTRUCTIONS
PREPARATION
Know Your LED Work Light
Before attempting to use the LED work light, familiarize yourself with all of its operating features
and safety requirements.
WARNING
• Do not allow familiarity with the LED work light to cause carelessness. Remember that one
careless moment is enough to cause severe injury. Before attempting to use any tool, be sure to
become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this tool.
Any such alteration or modication is misuse and could result in a hazardous condition leading to
possible serious personal injury.
6
OPERATING INSTRUCTIONS
1. Battery Pack
To Attach Battery Pack
a. Align the raised portion on the battery pack with the
grooves on the bottom of the tool, and then slide the
battery pack onto the tool as shown.
b. Make sure that the latch on the battery pack snaps
into place and the battery pack is secured to the tool
before beginning operation.
NOTICE: When placing the battery pack on the tool,
be sure that the raised rib on battery pack aligns with
the groove on the tool and the latches snap into place
properly. Improper assembly of the battery pack can
cause damage to internal components.
To Detach Battery Pack
a. Press the battery-release button to release the
battery pack.
b. Pull forward on the battery pack to remove it
from the tool.
2. ON/OFF Switch
a. To turn the LED work light ON, depress the
ON/OFF switch (A).
b. To turn it OFF, press the switch again.
1a
1b
2
A
7
OPERATING INSTRUCTIONS
3. Adjusting the LED Work Light Head
The light head (C) pivots from fully upright to fully folded,
and can remain at any point within the 135° range.
4. Loop
The LED work light is equipped with a loop (D). The light
can be carried or hung to an object with the loop.
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualied service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack from the tool. For safe
and proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your LED work light; never use detergent or alcohol.
4
D
3
C
8
TROUBLESHOOTING
WARNING
• Turn the switch to the “OFF” position and remove the battery pack from the tool before performing
troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The LED work light does not work Battery is depleted Charge the battery
WARRANTY
For 5 years from the date of purchase, the LED work light is warranted and for 3 years from date
of purchase the battery & charger are warranted for the original purchaser to be free from defects
in material and workmanship. This guarantee does not cover damage due to abuse, normal
wear, improper maintenance, neglect, unauthorized repair/alteration, or expendable parts and
accessories expected to become unusable after a reasonable period of use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at no
charge. This guarantee gives you specic legal rights, and you may also have other rights that
vary from state to state.
Printed in China
9
Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article
au détaillant, appelez notre service à la clientèle au 1 888 3KOBALT (1 888 356-2258),
entre 8 h et 20 h (HNE), du lundi au vendredi.
JOIGNEZ VOTRE REÇU ICI
Numéro de série Date d’achat
ARTICLE #0672832/0672826
LAMPE DE
TRAVAIL À DEL
MODÈLE #KWL 224-03
10
TABLE DES MATIÈRES
Caractéristiques du produit............................................................................................10
Contenu de l’emballage.................................................................................................11
Consignes de sécurité...................................................................................................12
Préparation....................................................................................................................13
Mode d’emploi ...............................................................................................................14
Entretien ........................................................................................................................15
Dépannage....................................................................................................................16
Garantie.........................................................................................................................16
CARACTÉRISTIQUES DU PRODUIT
COMPOSANT CARACTÉRISTIQUES
Tension nominale 24 V c.c.
Pivot de tête 135°
Source lumineuse 200 Lumen
Autres manuels pour KWL 224-03
1
Ce manuel convient aux modèles suivants
2
Table des matières
Langues :
Autres manuels Kobalt Lampe de travail
Manuels Lampe de travail populaires d'autres marques
PowerSmith
PowerSmith PWLD080T Manuel utilisateur
MaxLite
MaxLite 73683 Manuel utilisateur
Heitronic
Heitronic Trend 27867 Manuel utilisateur
Monzana
Monzana Gore MZCL10 Manuel utilisateur
EINHELL
EINHELL TE-CL 18/2000 LiAC Manuel utilisateur
Bayco
Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manuel utilisateur