Kobalt 53278 Manuel utilisateur
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 888-3KOBALT (888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Sunday. You could
Serial Number _______________________ Purchase Date _________________________
ATTACH YOUR RECEIPT HERE
ITEM: #5266230, #5266838, #5266839, #5266840, #5266841, #5266842
4-DRAWER
TOOL CART
MODEL: #53278, #53285 #53286, #53287, #53288, #53289
Español p. 11
KOBALT and logo design are trademarks or registered
trademarks of LF, LLC. All rights reserved.
SS23475
2
TABLE OF CONTENTS
Safety Information.....................................................................................................................................
Package Contents.....................................................................................................................................
Preparation...............................................................................................................................................
Assembly Instructions............................................................................................................................
Care and Maintenance.............................................................................................................................
Warranty....................................................................................................................................................
3
4
5
5-8
9
9
3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding this product, please call customer service at
888-3KOBALT (888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also
•BE CAREFUL when opening drawers. Items inside may shift causing the unit to become
unstable and tip over, causing personal injury and/or product damage.
• To prevent personal injury and/or property damage, distribute the weight in this item evenly.
• APPLY caster brakes unless moving the item.
• DO NOT stand, sit or climb on this product. You may fall which could cause personal injury,
product or property damage.
• DO NOT mount this product on a truck bed or any other moving object. This may cause
personal injury, product or property damage.
• DO NOT alter this product in any manner. For example, do not weld external lock bars or
attach electrical equipment.
• The maximum weight for each drawer should NOT be exceeded.
• DO NOT open more than one drawer at once.
• Lid must be open for drawers to be unlocked.
• Before moving, close lid and lock to secure all drawers in place.
• DO NOT lift using the pull handle.
CAUTION
WARNING
Top Tray:
Bottom Tray:
Side Table:
Total loading capacity:
Drawer #1:
Drawer #2:
Drawer #3:
Drawer #4:
30.12 in 3.90 in
12.36 in
25.94 in
25.94 in
30 in
Drawer Location DepthWidth Height
1.73 in
1.73 in12.36 in
14.17 in
14.17 in
16 in
Load Capacity
2.52 in
3.70 in
3 in
14.17 in 15.75 in .35 in
14.17 in
14.17 in
16.06 in 88 lbs
22 lbs
22 lbs
77 lbs
242 lbs
22 lbs
550 lbs
77 lbs
4
PACKAGE CONTENTS
F
O
G
A
Description Qty
Frame Leg 4
Part
BFrame Cross support 2
CBottom Tray 1
DLocking Swivel Caster 2
ESwivel Caster 2
FChest 1
GHandle 1
HSide Table 1
Description Qty
Caster Bolt, M8x14 16
Caster Washer, M8 16
Caster Nut, M8 16
Nut, M8 40
Bolt, M8x12 38
Handle Bolt, M8x16 2
Gas Strut 2
I
Part
J
K
L
M
N
O
N
M
A
C
I
B
D
J
K
L
E
H
5
PREPARATION
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Before beginning assembly of this product, make sure all parts are present. Compare parts with
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Tools required for assembly (not included): 12 mm, 13 mm and 14 mm socket, or 12 mm, 13 mm and
14 mm wrench.
1. Mount the two locking swivel casters (D) to
one side of the bottom tray (C) by inserting
four bolts (I) per caster from the underside of
the tray and then securing each bolt with a
caster washer (J) and a caster nut (K).
2. Mount the two swivel casters (E) to the other
side of the bottom tray by inserting four
caster bolts (I) per caster from the underside
of the tray (C) and then securing each bolt
with a caster washer (J) and a caster nut (K).
1
2
Caster bolt, M8x14
Caster washer, M8
Caster nut, M8
x 8
x 8
x 8
x 8
x 8
x 8
Caster bolt, M8x14
Caster washer, M8
Caster nut, M8
J
D
C
I
I
E
K
J
K
6
ASSEMBLY INSTRUCTIONS
4. Mount the frame leg assemblies into the
bottom tray by inserting bolts (M) into the
outside corners and securing with nuts (L).
Repeat for each corner.
5. With assistance, lift the chest (F) and mount it
between the frame leg assemblies so that the
bottom rests on the frame cross supports (B).
WARNING: Request assistance while mounting the chest to the posts. The chest is heavy.
WARNING: Lock the swivel casters before mounting the chest.
3. Attach a frame cross support (B) between
two frame legs (A) by inserting two bolts (M)
from the outside of the post and securing
with a nut (L) on the inside. Repeat with the
second frame cross support and remaining
pair of of frame legs.
3
4
5
Bolt, M8x12
Nut, M8
x 8
x 16
x 8
x 16
Hardware Used
Hardware Used
Bolt, M8x12
Nut, M8
M
B
F
M
L
AL
B
7
ASSEMBLY INSTRUCTIONS
6. Attach the handle (G) onto the chest (F)
on the same side as the locking swivel
casters (D). Insert two handle bolts (N)
from the exterior of the chest and secure
with with a nut (L).
7. Attach the side table (H) onto the chest (F)
opposite the pull handle (G). Insert four
bolts (M) from the exterior of the chest and
secure with four nuts (L).
AA
AA
6
7
Handle bolt, M8x16
Bolt, M8x12
Nut, M8
Nut, M8
x 2
x 4
x 2
x 4
Hardware Used
Hardware Used
N
G
F
F
G
D
L
M
L
H
8
ASSEMBLY INSTRUCTIONS
9. Tighten all hardware.
8. Secure the chest to the frame leg assemblies
by inserting bolts (M) through the posts and
into the chest and securing with a nut (L).
NOTE: On the same side as the pull handle,
only one bolt attachment will be used as the
handle uses the second position.
NOTE: Each corner of the chest has four
fasteners that will be installed when complete.
Bolt, M8x12
Nut, M8
x 10
x 10
Hardware Used
DD
8
M
L
9
CARE AND MAINTENANCE
WARRANTY
Water and other liquids spilled or splashed on the unit should be cleaned off immediately and
dried thouroughly.
Keeping your tool cart covered will protect it from dust and moisture that could potentially damage
the unit.
Lubricate drawer slides as needed.
Check for loose hardware and damaged parts.
Ensure caster wheels are swiveling and locking as intended.
This item carries a 3 - Year warranty from the date of purchase against defective parts and
workmanship. The warranty does not cover damage due to mishandling or abuse. This warranty gives
you specic legal rights, and you may have other rights that vary from state to state.
10
Ce manuel convient aux modèles suivants
11
Table des matières
Langues :
Autres manuels Kobalt Rangement des outils
Kobalt
Kobalt 3DPCWB2013 Manuel utilisateur
Kobalt
Kobalt 101301-9-01 Manuel utilisateur
Kobalt
Kobalt 0827415 Manuel utilisateur
Kobalt
Kobalt TC 41SS11 Manuel utilisateur
Kobalt
Kobalt 19156 Manuel utilisateur
Kobalt
Kobalt 3DSSWM2013 Manuel utilisateur
Kobalt
Kobalt 10011 Manuel utilisateur
Kobalt
Kobalt 8027412 Manuel utilisateur
Kobalt
Kobalt 0827414 Manuel utilisateur
Manuels Rangement des outils populaires d'autres marques
Ryobi
Ryobi RWB03 Manuel utilisateur
Husky
Husky H27CH5TR4BGK Manuel utilisateur
Scheppach
Scheppach ts 2100 Manuel utilisateur
Cornwell Tools
Cornwell Tools CTB360AKBK Manuel utilisateur
DIVERSIFIED WOODCRAFTS
DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manuel utilisateur
Cassese
Cassese CS200 CART Manuel utilisateur
