KMC Controls MCP-1160 Series Manuel utilisateur

Installation Guide

6” Pneumatic Damper Actuator

MCP-1160 Series

Mounting

The MCP-1160 MUST be mounted on a rigid

surface due to the force generated at, or near,

maximum air pressure.

1. Align the actuator with the controlled device.

The mounting joint allows the actuator to be

located in a different plane from the controlled

device.

2. Attach the actuator to the rigid surface through

the four 3/8" (4 mm) holes in the mounting

bracket.

3. Adjust the crankarm assembly from 60° to 120°

rotation as required.

4. DO NOT tighten the universal joint. The

actuator must be free to swivel as it operates.

Connections

MCP-1160 models ordered with positioners are

factory piped.

♦Use 1/4" (6 mm) O.D. FR polyethlyene tubing.

♦Use only clean, dry control air. No attempt

should be made to use any other medium.

1 Connect the actuator input to the positioner

output, Port “1”.

2. Connect the input signal to the positioner to Port

“2”.

3. Connect the main air (20 psi) to the center port.

NOTE: If the application requires operation near

the maximum temperature and maximum

pressure, add a tubing restraint to the actuator

connection.

KMC Controls

19476 Industrial Drive

New Paris, IN 46553

574.831.5250

www. kmccontrols.com

016-019-01

Adjustments and Calibration

DANGER

The MCP-1160 contains a large powerful spring.

Exercise extreme caution if disassembly is required.

The actuator shaft MUST be restrained to prevent

the spring from expanding.

The MCP-1160 contains an 8-13 psi spring. A

positioner allows the unit to operate over any 5 psi

span with the start-point adjustable from 3-10 psi.

Replace the 5 psi spring with a 10 psi spring to widen

the span.

To change the positioner start-point:

1. Apply the desired signal pressure

2. Rotate the start-point adjuster until the actuator

starts to stroke.

Maintenance

The MCP-1160 actuator is designed for long term

reliability. No routine maintenance is required,

however care should be taken during any installation

or maintenance due to the power of the actuator.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels KMC Controls Contrôleurs

KMC Controls

KMC Controls KMD-5205 Mode d'emploi

KMC Controls

KMC Controls KMDigital KMD-5290E Mode d'emploi

KMC Controls

KMC Controls BAC-7401 Mode d'emploi

KMC Controls

KMC Controls FlexStat BAC-120063CW-ZEC Manuel de l'opérateur

KMC Controls

KMC Controls BAC-4000 series Guide de l'utilisateur

KMC Controls

KMC Controls BAC-7302 Mode d'emploi

KMC Controls

KMC Controls CSC-3501 Manuel utilisateur

KMC Controls

KMC Controls CSP-4702 Manuel utilisateur

KMC Controls

KMC Controls MEP-1500 Series Manuel utilisateur

KMC Controls

KMC Controls CSC 3000 Series Guide de l'utilisateur

KMC Controls

KMC Controls SimplyVAV BAC-8205 Manuel utilisateur

KMC Controls

KMC Controls KMD-7001 Instructions d'utilisation d'origine

KMC Controls

KMC Controls FlexStat BAC-12 63 Series Manuel utilisateur

KMC Controls

KMC Controls MEP-4201 Manuel utilisateur

KMC Controls

KMC Controls KMD-5831 Instructions d'utilisation d'origine

KMC Controls

KMC Controls CTE-3017 Manuel utilisateur

KMC Controls

KMC Controls BAC-7001 Manuel utilisateur

KMC Controls

KMC Controls MEP-5062 Manuel utilisateur

KMC Controls

KMC Controls KMD-5290 Manuel utilisateur

KMC Controls

KMC Controls BAC-5900 Series Manuel utilisateur

KMC Controls

KMC Controls MCP-1060 Series Manuel utilisateur

KMC Controls

KMC Controls SimplyVAV BAC-8001 Guide de l'utilisateur

KMC Controls

KMC Controls BAC-5901C-AFMS Manuel utilisateur

KMC Controls

KMC Controls MEP-4201 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur