Kitsound MIAMI Manuel utilisateur
USER MANUAL
MIAMI
WIRELESS SPEAKER
JB. 5784-a/ KSMIA / Made in China. © KitSound is a trademark of Kondor Limited, 2017.
Christchurch, Dorset, BH23 4FL, UK. Christchurch, Dorset, BH23 4FL, UK
All trademarks are acknowledged as the property of their
respective owners. Unless otherwise stated their use
does not imply that the trademark owner is aliated with
KitSound or endorses the products herein.
2 3
Please read this manual carefully before use.
Box contents
• KS Miami
• Micro USB charge cable
• User manual
Functions
1. Mode
2. Multi-function button (MFB)
3. Volume–/Previous track
4. Volume+/Next track
1 2 3 4
[continued...]
4 5
5. Micro SD card reader
6. Aux input
7. Micro USB charge port
8. On/O switch
9. LED indicator
LINE-IN
OFF ON
SD CARD DC 5 V IN
5 6 7 8
9
[...continued] Functions
6 7
Instructions for use
Charging the battery
Connect one end of the micro USB charge cable to the Micro USB charge port (7) on the Miami
and connect the other end to your PC or USB mains adaptor. The battery will start charging.
• It takes up to 3 hours to fully charge the battery
• Whilst charging, the LED indicator (9) will be solid red
• When fully charged, the LED indicator (9) will turn solid green
Battery protection mode
To keep the rechargeable battery in good condition, please discharge and recharge speaker
every 3 months, especially if you are not using the speaker for long periods of time.
8 9
Getting started
• To turn the Miami on, slide the On/O switch (8) to the ‘On’ position
• To turn the Miami o, slide the On/O switch (8) to the ‘O’ position
Please ensure the rubber feet are free from dirt to prevent the speaker moving/vibrating when
playing music. If the feet need cleaning, simply wipe them with a damp cloth.
Dierent modes
• When you rst turn the Miami on, it will automatically go into pairing mode and the LED
indicator (9) will be quickly ashing blue
• To change to FM, short press Mode (1) and to change to Aux, insert an aux cable into the
Aux input (6) and the Miami will automatically go into Aux mode regardless of what mode
you are currently using
10 11
PLEASE NOTE: If you are connected wirelessly and change to either FM or Aux the Miami
will automatically disconnect from the wireless connection. However when you return to
wireless it will automatically look for the last paired device.
LED indicator colours
Quickly ashing blue wireless pairing mode
Solid blue ready to play music in any mode
Slowly ashing blue playing music wirelessly
Solid red charging
Solid green fully charged
12 13
Wireless setup
Pairing a wireless device for the rst time
1. Slide the On/O switch (8) to the ‘On’ position
2. The LED indicator (9) will ash blue to indicate it is in pairing mode
3. Turn your Bluetooth®enabled device ON and search for available devices
(check your device’s manual if you’re unsure how to do this)
4. Select ‘KS Miami’ from the list of found devices. If asked for a passcode, enter ‘0000’ and the
Miami will then be connected to your device
5. After pairing successfully, the LED indicator (9) will be solid blue
6. The next time the Miami is switched on, it will automatically search for and attempt to connect
to the last paired device
[continued...]
14 15
Note: ’Bluetooth’ is a trademark of Bluetooth SIG, Inc. This product is in no way aliated with or
endorsed by Bluetooth SIG Inc.
Note: If your device is not connecting automatically, it’s because it is not the last paired device.
Simply delete ‘Miami’ from the list of Bluetooth devices on your device and re-pair.
Re-pairing or pairing new devices
1. Turn wireless o on any previously paired devices
2. Follow the ‘Pairing a wireless device for the rst time’ instructions
[...continued] Wireless setup
16 17
7. The volume can be adjusted on both your device and the Miami. To change the volume
on the Miami, press and hold the Volume– (3) or Volume+ (4) button until you reach the
desired volume
Note: Track control functions from the buttons on the Miami will require your device to have
Bluetooth® prole AVRCP. Please check your device’s manual if unsure.
Playing audio wirelessly
1. If Miami is in FM mode, short press Mode (1) and it will change to wireless mode
2. Follow the instructions in the ‘Pairing a wireless device’ section
3. Use the controls on your device to select content
4. Audio played through the connected wireless device will now be heard through the Miami
5. To play or pause the selected track, use the controls on your device or short press MFB (2)
6. To skip track, use the controls on your device or short press the Previous track (3) or the
Next track (4) button
18 19
Playing audio via aux-in
1. With the Miami turned on, insert the 3.5 mm audio cable into the Aux input (6). The Miami
will automatically enter Aux mode, and the LED indicator (9) will turn solid blue
2. Plug the other end of the aux cable into the audio/headphone output on an MP3 player
or other audio source
3. Audio played through the connected device will now be heard through the Miami
4. The volume can be adjusted on both your device and Miami. To change the volume on the
Miami, short press the Volume– (3) or Volume+ (4) button several times until you reach the
desired volume
5. Short pressing MFB (2) will mute the speaker but please note, this will not pause the track
on your device
Note: When in Aux mode you will only be able to skip tracks, play, and pause your music from
your device.
Table des matières
Autres manuels Kitsound Intervenants
Kitsound
Kitsound VOICE ONE Manuel utilisateur
Kitsound
Kitsound KS SLAM XL Manuel utilisateur
Kitsound
Kitsound UPSTAGE Manuel utilisateur
Kitsound
Kitsound hive evolution Manuel utilisateur
Kitsound
Kitsound DIGGIT XL Manuel utilisateur
Kitsound
Kitsound BOOGIE BUDDY Manuel utilisateur
Kitsound
Kitsound Hive Discovery Manuel utilisateur
Kitsound
Kitsound BOOMBAR 2 Manuel utilisateur
Kitsound
Kitsound HIVE 2 Manuel utilisateur
Kitsound
Kitsound HAWAII 1.0 Manuel utilisateur
Kitsound
Kitsound BOXI MINI Manuel utilisateur
Kitsound
Kitsound Hive 2 Manuel utilisateur
Kitsound
Kitsound SOUL 2 Manuel utilisateur
Kitsound
Kitsound BoomBar+ Manuel utilisateur
Kitsound
Kitsound Sonar Manuel utilisateur
Kitsound
Kitsound POCKET HIVE Manuel utilisateur
Kitsound
Kitsound OVATION Manuel utilisateur
Kitsound
Kitsound HIVE X Manuel utilisateur
Kitsound
Kitsound CUBE Manuel utilisateur
Kitsound
Kitsound DANCEFLOOR Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur