Step:1 Step:2
Drywall Wall finish (tiles)
Silicon
Place the shower tray where desired.Use a level
to make sure the tray is in horizontal position.
Apply silicon sealant to shown the position.
Make sure distant A is 15-20mm.Use a level,
plumb the wall jamb(NO.2)
and mark the 3 wall mounting holes.
Repeat for the other wall jamb.
Step:3
Drill a hole at each marked
location with a Ф6-8mm drill bit,
after using pencil to mark the
mounting holes.Then fix the 2
wall jambs with 4*35 screws
(NO.1).
use pencil to mark the
mounting holes
15-20MM
A
