Kisai Quasar Manuel utilisateur
Change the way you think about time
INSTRUCTION MANUAL
Button A
Button B
Quasar has 3 display modes [Number], [Pattern] & [Animation]
You may also choose to display the time in [12hr] or [24hr]
modes.
See section 5 “How to set the time” to change your preference.
You can illuminate the display for a short time with the EL
backlight by pressing button A. This function works best at
night time.
The 3rd display mode [Animation] causes the display to
transition between [Number] & [Pattern] as shown above.
1. How to read the time
06:24
Pattern modeNumber mode
•
•
•
•
•
2. How to read the date
• Press button B to display the date.
• The date icon indicates that you are in date mode.
• You can illuminate the display for a short time with the EL
backlight by pressing button A.
• The date can be displayed as MM/DD or DD/MM. See
section 6 “How to set the date” to change your preference.
• The display will change back to time mode after a short time.
Date icon December 5th
(12 / 05)
Pattern modeNumber mode
3. How to check the alarm time
• Press button B twice to display the alarm time.
• The alarm mode icon indicates that you are in alarm
mode.
PM indicator
Alarm indicator
Alarm ON
indicator
10:20 PM (alarm on)
06:30 AM (alarm on)
Pattern mode
Number mode
Hour markers (3)
Stopwatch
icon
Hour markers
12 in total
Minutes (45)
Seconds (36)
12h 30m 21s
3h 45m 36s
4. How to use the stopwatch
• Press button B three times to display the stop watch.
• The stopwatch icon indicates that you are in stopwatch
mode.
• Press button A to start & stop the timer.
• Hold button A for 3 seconds to reset the timer.
• The maximum timer is: 12hrs 59 mins & 59 secs
5. How to set the time
• The current hour will be flashing.
• Press button A to increase the hour.
• Press button B to confirm.
• The current minutes will be flashing.
• Press button A to increase the minutes.
(Hold A to increase quickly)
• Press button B to confirm.
I. Setting the hour
II. Setting the minutes
• When the time is displayed, press and hold button B for 3
seconds to enter setting mode.
*Note after 10 seconds of inactivity setting mode will deactivate
08 hours
23 minutes
Note: In [12hr] mode the PM
icon will show for PM times.
12 hour mode 24 hour mode
• The display will flash the current hour mode (12 or 24)
• Press button A to change the hour mode.
• Press button B confirm.
III. Setting 12/24 Hour Mode
Number mode
Pattern mode
Animation mode
• The current display mode will be shown.
• Press button A to change the display mode.
• Press button B to confirm & finish.
IV. Setting the display mode
6. How to set the date
• When the date is displayed, press and hold button B for 3
seconds to enter date setting mode.
*Note after 10 seconds of inactivity setting mode will deactivate
• The year will flash when you are in year setting.
• Press button A to increase the year as required.
(Hold A to increase quickly)
• Press button B to confirm.
• The date mode icon will be displayed and the month
will flash when you are in month setting.
• Press button A to increase the month as required.
• Press button B to confirm.
• The date mode icon will be displayed and the date
will flash when you are in date setting.
• Press button A to increase the date as required.
(Hold A to increase quickly)
• Press button B to confirm.
I. Setting the year
II. Setting the month
III. Setting the date
Table des matières
Autres manuels Kisai Montre
Kisai
Kisai Xtal Manuel utilisateur
Kisai
Kisai OPTICAL ILLUSION Manuel utilisateur
Kisai
Kisai Satellite-X Manuel utilisateur
Kisai
Kisai RPM Manuel utilisateur
Kisai
Kisai Satellite-X Manuel utilisateur
Kisai
Kisai Stencil Manuel utilisateur
Kisai
Kisai Seven Manuel utilisateur
Kisai
Kisai Blade Manuel utilisateur
Kisai
Kisai MAZE Manuel utilisateur
Kisai
Kisai Radioactive Manuel utilisateur
