KIP KIPFold 2800 Manuel utilisateur
KIP Certified AutoCAD Driver
KIPFold 2800
User Guide
Version SN 1.0
KIPFold 2800 User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP. 2016 KIP. All references subject to change without notice
- 1 -
Safety
Read these safety instructions completely before operating the folder and keep this manual for future reference close to
the folder. Carefully observe all warnings, precautions and instructions on the folder or the ones described in the operating
instructions. In order to guarantee hazard-free operations all maintenance and repairs are only to be carried out by trained
personnel.
WARNING: Indicates a potentially hazardous situation which,
if not avoided, COULD result in death or serious injury.
Warning
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, MAY result in minor or moderate injury.
Maintenance and Modifications
To avoid the risk of introducing hazards, all modifications and maintenance activities are
strictly reserved to properly qualified and trained service technicians. In daily use, any
electrical equipment may be subject to parts wear and eventual failure. In order to maintain
safety and reliability, the Customer Engineer (hereafter called CE) must perform regular
maintenance inspections.
General
Make sure that the folder is placed on a level, horizontal surface of sufficient strength. See the
respective specifications sheet for the weight of the equipment
Always use materials for the respective folder. Materials not approved can cause faults in the
folder.
Do not use the folder when it is emitting unusual sounds. Remove the plug from the power
socket or turn off the fixed connection to the electricity grid and contact Customer Service.
Do not use the folder in rooms which are subject to excessive vibration.
Move the folder careful and slow using two persons.
Set the adjustable feet on the ground when the folder is in the desired position
KIPFold 2800 User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP. 2016 KIP. All references subject to change without notice
- 2 -
Main connection cable
Do not use different connector cables, other than supplied with the folder. When replacement
of the power supply cable is required because of damage or defect, contact your CE for
proper replacement of this power supply cable.
Mains connection
Do not use an extension cable to connect the machine.
This machine is not designed for connection to an IT power supply system. An IT power
system is voltage network in which the neutral wire is not connected to earth.
When the machine is connected through a wall-socket, place the machine near a wall-socket
that is easily accessible.
When the machine is connected through a fixed connection to the electricity grid, the
disconnect device in the fixed connection must be easily accessible.
The machine must be connected to an earth (grounded) outlet.
Measures to take in case of an accident
1. If an accident has occurred, the distributor who has been notified first must immediately
take emergency measures to provide relief to affected persons and to prevent further
damage.
2. If a report of a serious accident has been received from a customer, an onsite evaluation
must be carried out quickly by an authorized person.
3. To determine the cause of the accident, conditions and materials must be recorded
through direct on-site checks, in accordance with instructions.
4. For reports and measures concerning serious accidents, follow the regulations specified
by the distributor.
Disclaimer
These safeguards have been compiled to the best of our knowledge. They are intended as a compact guide to the safe
handling of the product. We reserve the right to revise specification data sheets, as new information becomes available.
It is the user´s responsibility to determine the suitability of this information for the adoption of safety precautions as
may be necessary. It is the user´s responsibility to ensure that the specification data sheets are the
latest ones issued. If and in so far as limitation of liability is permitted under the applicable laws, we do not accept
liability for any inaccuracy that may occur in this information.
KIPFold 2800 User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP. 2016 KIP. All references subject to change without notice
- 3 -
Power & Switch On
Please use only the power cable supplied with the folder.
100 - 240 VAC 50/60Hz 10A
Do not use multi plug extension cords!
These cords will not stand the power consumption of printer
and folder.
The power supply box is at the folder's right bottom side.
The main switch of the machine is next to the power cable connector.
Find the folders serial number on the rating plate next to the switch.
KIPFold 2800 User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP. 2016 KIP. All references subject to change without notice
- 4 -
Basic Screens on the Folder
The folder runs a self-test of the system.
The standard start screen appears in the display, if the test
runs without any problem.
In case a problem is detected during the self-test, the
screen shows an error code.
Please refer to the Trouble Shooting for more information.
When Connected to the KIP PrintProer, if this image is
displayed on the Folder Screen the KIP PrintProer is
controlling the folder in an online condition. In order to put
the folder into an Offline state, at the touch screen of the
printer select the Folder Offline button.
KIPFold 2800 User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP. 2016 KIP. All references subject to change without notice
- 5 -
Main Folder Screen – Offline Mode
Shows the contact information of the technical service
Program editor.
Click on meter counter to reset it
This icon notes “Manual” mode.
The KIP Printer controls the online / offline condition of the folder.
Opens a list of available folding programs.
KIPFold 2800 User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP. 2016 KIP. All references subject to change without notice
- 6 -
Media and formats
Format limits
Fan Folder
All documents with length from 210 mm (8.5") up to 6.000 mm (19,6 ft) (80 gr. Paper) or
unlimited length (option) and width up to max. 914 mm (36").
Long copies will be deployed fan folded in the tray under the bridge.
Cross Folder
Maximum paper length of 2500 mm. Longer copies will not be transported into the cross
folder but deployed fan folded in the catch tray under the bridge.
Recommended media
The paper weight should not be less than 60 g/m² (18#) and not more than 110 g/m².(24#)
For application of media types, please contact your dealer.
Film or materials with glossy shiny surfaces are not suitable.
KIPFold 2800 User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP. 2016 KIP. All references subject to change without notice
- 7 -
Select and customize programs
Select a folding program for offline function by pressing on the name of the fold currently selected.
Select the disired program.
KIPFold 2800 User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP. 2016 KIP. All references subject to change without notice
- 8 -
Feeding prints
In most cases the title block (legend) has to be on the leading edge of the document entering
the folder. The title block position has to be set in the printing software you are using. (rotation)
KIPFold 2800 User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP. 2016 KIP. All references subject to change without notice
- 9 -
With the optional Rotation Unit, A2 or C-size formats can be printed landscape on an A1 or D-size roll. The
folder will automatically rotate them into the right position.
Autres manuels pour KIPFold 2800
1
Table des matières
Autres manuels KIP Plieuse
Manuels Plieuse populaires d'autres marques
Mathias Bauerle
Mathias Bauerle Multipli 35 Manuel utilisateur
Intelli-Fold
Intelli-Fold DF-304C Manuel utilisateur
Pitney Bowes
Pitney Bowes DI425 FastPac Manuel
Hwasung
Hwasung COMPODIS HMK-830 Series Manuel utilisateur
KRUG+PRIESTER
KRUG+PRIESTER IDEAL 8306 Manuel utilisateur
XPOtool
XPOtool 61574 Manuel utilisateur
