Kingfisher MCS2200 Manuel utilisateur

EN Electric Chain

Saw 2200W (16") /

2400W (18")

MCS2200 /

MCS2400-4

5063022106193

5063022106551

5063022106377

5 0 63 02 21140 4 4

TTCS2200 /

TTCS2400

5063022106391

5063022108555

5063022108470

V10423_5063022106193_MAND1_2223

Page Size: A5

EAN: 5063022106193

Impala Ref: PRJ27468

KNG: KNG-2208-0030

113/02/23

Mohit 228/02/23

SV 309/03/23

SV 431/03/23

SV 5XX/XX/23

NAME

EN ORIGINAL INSTRUCTIONS

IMPORTANT - These instructions are for your safety.

Please read through them thoroughly prior to handling

the product and retain them for future reference.

5063022106193_MNL_IN_V04.indd 15063022106193_MNL_IN_V04.indd 1 03-04-2023 11:25:5303-04-2023 11:25:53

EN Parts

EN You will need

EN Contents

Product description 3

Safety 4

Technical specication 15

Before you start 16

Functions & Settings 23

Operation 25

Care and maintenance 33

Guarantee 39

Declaration of conformity 40

01. x1 02. x1 03. x1 04. x1

5063022106193_MNL_IN_V04.indd 25063022106193_MNL_IN_V04.indd 2 03-04-2023 11:25:5303-04-2023 11:25:53

EN Product description

1. Rear handle

2. Front handle

3. Front safeguard

(chain brake lever)

4. Spiked bumper

5. Oiling port

6. Mounting bolt

7. Drive sprocket

8. Saw chain

9. Guide bar

a. Sprocket wheel

b. Lubrication hole

c. Tensioning wheel*

10. Chain tension wheel

11. Locking wheel

12. Chain saw cover

a. Spigot* (x2)

13. Air vents

14. Cord retainer

15. Power cord with plug

16. Lock-off button

17. On/off switch

18. Rear safeguard

19. Motor housing

a. Motor*

20. Oil tank cap

21. Oil level window

22. Guide bar cover

NOTE: Parts marked with * are not shown in this overview. Please refer to the

respective part in the instruction manual.

13 12

11 10 9b

5063022106193_MNL_IN_V04.indd 35063022106193_MNL_IN_V04.indd 3 03-04-2023 11:25:5403-04-2023 11:25:54

EN Safety

General power tool safety warnings

WARNING! Read all safety warnings, instructions,

illustrations and specications provided with this

power tool. Failure to follow all instructions listed

below may result in electric shock, re and/or serious

injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

b) Do not operate power tools in explosive atmospheres, such

as in the presence of ammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

Electrical safety

a) Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodied plugs and matching

outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators. There

is an increased risk of electric shock if your body is earthed or

grounded.

5063022106193_MNL_IN_V04.indd 45063022106193_MNL_IN_V04.indd 4 03-04-2023 11:25:5403-04-2023 11:25:54

c) Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for

outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable,

use a residual current device (RCD) protected supply. Use

of an RCD reduces the risk of electric shock.

Personal safety

a) Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the inuence of drugs,

alcohol or medication. A moment of inattention while operating

power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the

o󰀨-position before connecting to power source, picking

up or carrying the tool. Carrying power tools with your nger

on the switch or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating part

of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery.

Keep your hair and clothing away from moving parts. Loose

clothes, jewellery or long hair can be caught in moving parts.

5063022106193_MNL_IN_V04.indd 55063022106193_MNL_IN_V04.indd 5 03-04-2023 11:25:5403-04-2023 11:25:54

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection can

reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of tools

allow you to become complacent and ignore tool safety

principles. A careless action can cause severe injury within a

fraction of a second.

Power tool use and care

a) Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better

and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on

and o󰀨. Any power tool that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or remove

the battery pack, if detachable, from the power tool before

making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk

of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage of parts

and any other condition that may a󰀨ect the power tool’s

operation. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power

tools.

f) Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind and

are easier to control.

5063022106193_MNL_IN_V04.indd 65063022106193_MNL_IN_V04.indd 6 03-04-2023 11:25:5403-04-2023 11:25:54

g) Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account the

working conditions and the work to be performed. Use of

the power tool for operations dierent from those intended could

result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and

free from oil and grease. Slippery handles and grasping

surfaces do not allow for safe handling and control of the tool in

unexpected situations.

Service

a) Have your power tools serviced by a qualied repair person

using only identical replacement parts. This will ensure that

safety of the power tool is maintained.

Safety instructions for chain saws

General chain saw safety warnings:

a) Keep all parts of the body away from the saw chain when

the chain saw is operating. Before you start the chain saw,

make sure the saw chain is not contacting anything. A

moment of inattention while operating chain saws may cause

entanglement of your clothing or body with the saw chain.

b) Always hold the chain saw with your right hand on the rear

handle and your left hand on the front handle. Holding the

chain saw with a reversed hand conguration increases the risk

of personal injury and should never be done.

c) Hold the chain saw by insulated gripping surfaces only,

because the saw chain may contact hidden wiring or

its own cord. Saw chains contacting a “live” wire may make

exposed metal parts of the power tool “live” and could give the

operator an electric shock.

d) Wear eye protection. Further protective equipment for

hearing, head, hands, legs and feet is recommended.

Adequate protective equipment will reduce personal injury from

ying debris or accidental contact with the saw chain.

5063022106193_MNL_IN_V04.indd 75063022106193_MNL_IN_V04.indd 7 03-04-2023 11:25:5403-04-2023 11:25:54

e) Do not operate a chain saw in a tree, on a ladder, from a

rooftop, or any unstable support. Operation of a chain saw in

this manner could result in serious personal injury.

f) Always keep proper footing and operate the chain saw only

when standing on xed, secure and level surface. Slippery

or unstable surfaces may cause a loss of balance or control of

the chain saw.

g) When cutting a limb that is under tension be alert for

spring back. When the tension in the wood bres is released,

the spring loaded limb may strike the operator and/or throw the

chain saw out of control.

h) Use extreme caution when cutting brush and saplings.

The slender material may catch the saw chain and be whipped

toward you or pull you o balance.

i) Carry the chain saw by the front handle with the chain saw

switched o󰀨 and away from your body. When transporting

or storing the chain saw, always t the guide bar cover.

Proper handling of the chain saw will reduce the likelihood of

accidental contact with the moving saw chain.

j) Follow instructions for lubricating, chain tensioning

and changing the bar and chain. Improperly tensioned or

lubricated chain may either break or increase the chance for

kickback.

k) Cut wood only. Do not use chain saw for purposes not

intended. For example: do not use chain saw for cutting

metal, plastic, masonry or non- wood building materials.

Use of the chain saw for operations dierent than intended could

result in a hazardous situation.

l) Do not attempt to fell a tree until you have an

understanding of the risks and how to avoid them.

Serious injury could occur to the operator or bystanders while

felling a tree.

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the guide bar touches

an object, or when the wood closes in and pinches the saw chain in

the cut.

5063022106193_MNL_IN_V04.indd 85063022106193_MNL_IN_V04.indd 8 03-04-2023 11:25:5403-04-2023 11:25:54

Tip contact in some cases may cause a sudden reverse reaction,

kicking the guide bar up and back towards the operator.

Pinching the saw chain along the top of the guide bar may push the

guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of the saw

which could result in serious personal injury. Do not rely exclusively

upon the safety devices built into your saw. As a product user,

you should take several steps to keep your cutting jobs free from

accident or injury.

Kickback is the result of tool misuse and/or incorrect operating

procedures or conditions and can be avoided by taking proper

precautions as given below:

a) Maintain a rm grip, with thumbs and ngers encircling

the chain saw handles, with both hands on the saw and

position your body and arm to allow you to resist kickback

forces. Kickback forces can be controlled by the operator, if

proper precautions are taken. Do not let go of the product.

b) Do not overreach and do not cut above shoulder height.

This helps prevent unintended tip contact and enables better

control of the chain saw in unexpected situations.

c) Only use replacement guide bars and chains specied by

the manufacturer. Incorrect replacement guide bars and saw

chains may cause chain breakage and/or kickback.

d) Follow the manufacturer’s sharpening and maintenance

instructions for the saw chain. Decreasing the depth gauge

height can lead to increased kickback.

Additional chain saw safety warnings:

a) Follow all instructions when clearing jammed material,

storing or servicing the chain saw. Make sure the switch is

o󰀨 and remove the plug from the power supply. Unexpected

actuation of the chain saw while clearing jammed material or

servicing may result in serious personal injury.

b) Keep handles dry, clean, and free from oil and grease.

Greasy, oily handles are slippery causing loss of control.

5063022106193_MNL_IN_V04.indd 95063022106193_MNL_IN_V04.indd 9 03-04-2023 11:25:5403-04-2023 11:25:54

c) Pay attention to national and local regulations. National and

local regulations may restrict the use of this product.

d) Only use replacement guide bars and saw chains specied

by the manufacturer or equivalent replacements. Using non-

approved cutting attachments can result in personal injuries and

damage to property.

e) Before using the product and after any impact or dropping,

check for signs of wear or damage and repair as necessary.

f) Never remove or modify any guard or safety component. Ensure

that guards and other safety components necessary for machine

operation are in position, in good working condition and properly

maintained to avoid injuries.

g) Training of all operation is necessary for rst-time and

inexperienced operator.

h) Remove branches in section.

Health surveillance

All employees should be part of an employer’s health surveillance

scheme to help identity any vibration related diseases at an early

stage, prevent disease progression and help employees stay in

work.

Vibration and noise reduction

To reduce the impact of noise and vibration emission, limit the time

of operation, use low-vibration and low-noise operating modes as

well as wear personal protective equipment.

Take the following points into account to minimise the vibration and

noise exposure risks:

1. Only use the product as intended by its design and these

instructions.

2. Ensure that the product is in good condition and well maintained.

3. Use correct attachments for the product and ensure they are in

good condition.

4. Keep tight grip on the handles/grip surface.

5. Maintain this product in accordance with these instructions and

keep it well lubricated (where appropriate).

5063022106193_MNL_IN_V04.indd 105063022106193_MNL_IN_V04.indd 10 03-04-2023 11:25:5403-04-2023 11:25:54

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kingfisher Tronçonneuse

Kingfisher

Kingfisher FPCSP41-3 Manuel utilisateur

Manuels Tronçonneuse populaires d'autres marques

Bushranger

Bushranger CS4210 Manuel utilisateur

Husqvarna

Husqvarna 136, 141 Manuel utilisateur

Echo

Echo CS-330EVL Manuel utilisateur

HART

HART HLCS01 Manuel utilisateur

Homelite

Homelite UH10817 Manuel utilisateur

Westfalia

Westfalia SCS 725 Manuel utilisateur

Nakayama

Nakayama EC2050 Manuel utilisateur

The Handy

The Handy THPCS16 Manuel utilisateur

McCulloch

McCulloch PRO MAC 54 Manuel

Husqvarna

Husqvarna 359 E-tech Manuel utilisateur

Craftsman

Craftsman 358.352162 Manuel utilisateur

Craftsman

Craftsman 358.350270 Manuel utilisateur

Craftsman

Craftsman 358.351610 Manuel utilisateur

Echo

Echo CS-8001(6digits)(36) Mode d’emploi

Poulan Pro

Poulan Pro 545047544 Manuel utilisateur

Ryobi

Ryobi RY3714VNM Manuel utilisateur

Homelite

Homelite Ranger UT10926 Manuel utilisateur

McCulloch

McCulloch TimberBear TM502 Manuel utilisateur