10
①①①①
①①①①
①①
①①①①
①①
②②
②②
②②
②②
【Mounting the screen on wall】
4.First, put on the spring on all 4
corners as marked ①below, then
from the middle of frame towards
to edge.
【Notice】
When wrinkle is observed on the screen fabric after installing all springs, DO NOT
remove the springs, slightly pull the end of spring along the frame slot until wrinkle
disappears.
SStteep tp thhrreeee：：BBoorrddeer Fr Frraamme Ie Innssttaallllaattiioonn [[MMaatteerriiaallss ] ]
1.Put both long border frames
along the long, DO NOT insert any
corner bracket on long border
frame at this moment.
2.Insert corner bracket into both
end of short border frame, then
assemble the border frame.
3.Fasten the decoration corner
cover onto border frame by
screw.
Drill 4 holes on concrete wall by 8mm hammer drill bit according to the dimension
indicated below, then insert the screw anchor into the hole by hammer.
Product length2/3
30mm
11
22667799
SStteep op onnee：：MMoouunnt tt thhe ue uppppeer hr haannggiinng bg brraacckkeet [t [MMaatteerriiaallss11111133
] ]
1144
4.Put both long border
frames along the long,
DO NOT insert any corner
bracket on long border frame
at this moment.
1199
22
66
77
99
1199
11001188
Outer slot
Inner slot
5.Recommend to hang the spring
onto the outer slot. Move the
spring to inner slot to enhance
overall flatness when necessary.
6.Pull out the spring by spring hook,
make sure the end of spring fully go
through the hole on fabric.
