Kichler Lighting ETL Manuel utilisateur

Instruction Manual

ETL Model #Bluetooth Audio LK

LED Ceiling Fan Audio Light Kit

Featuring BLUETOOTH®Technology

380950

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

4:Consult the dealer or an experienced radio/TV technician for help.

3:Connect the equipement into an outlet on a circuil different from that to which the receiver is connected.

2:Increase the separation between the equipment and receiver.

1:Reorient or relocate the receiving antenna.

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

and used in accordance with the instructions, may cause harmful interference to radio communications.

in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

77N.W.: 5.6KGS, G.W.:7 7

FCC ID:RGB-BTADLK380950

IC:10907

RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

777777777777777A-BTLK###0380950.This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt

1. SAFETY RULES (READ AND SAVE THESE INSTRUCTIONS)

1. To reduce the risk of electric shock, insure

electricity has been turned off at the circuit

breaker or fuse box before beginning.

2. All wiring must be in accordance with

the National Electrical Code and local

electrical codes. Electrical installation

should be performed by a qualied licensed

electrician.

3. CAUTION: All glass is fragile, use care

when handing the glass bowl.

4. CAUTION: To avoid accidental burning,

allow the bulb and glass bowl to cool

completely before touching or replacing the

glass bowl or bulbs.

5. CAUTION: To reduce the risk of electrical

shock, This light kit is suitable to be used in

damp locations.

6. WARNING: Changes or modications to

this unit not expressly approved by the party

responsible for compliance could void the

user’s authority to operate the equipment.

This product may cause interference to radio equipment and should not be installed near maritime safety communications

equipment, ships at sea or other critical navigation or communications equipment operating between 0.45-30 Mhz.

CAUTION:

To reduce the risk of electrical shock, this light should be used only with the fan model listed below:

Model: K52-403

Manufactured by company:

Chein Luen Industries (Zhongshat)LTD

7.9KGS

LED Ceiling Fan Audio Light Kit

Featuring BLUETOOTH®Technology

2. TOOLS AND MATERIALS REQUIRED

• Phillips screw driver

• Blade screw driver

• 11mm wrench

• Step ladder

• Wire cutters

• Electrical tape

3. PACKAGE CONTENTS

Unpack your fan and check the contents.

You should have the following items:

Part No. Description Quantity

aLight kit tter assembly 1

b Glass bowl 1

cHex nut 1

dRubber washer 1

e 4” Pull chain 1

f7” Pull chain 1

4. PREPARING THE FAN

Step 1. Remove the ceiling fan switch cup cover

from the ceiling fan assembly by removing the three

mounting screws.

Step 2. Remove the center plug from the switch cup

cover.

5. PREPARING THE LIGHT KIT

Step 1. Insert the black wire and white wire from

the light kit through the center hole of the ceiling fan

switch cup cover.

Step 2. Thread the ceiling fan switch cup cover onto

the threaded nipple on the top of the light kit.

Step 3. Take out the lockwasher and hex nut from the

hardware pack. Insert the black wire and white wire

through the lockwasher and hex nut, tighten them

securely.

Switch cup

cover

Center plug

Mounting

screws

Lockwasher

Light kit

Threaded nipple

Hex nut

Switch cup cover

LED Ceiling Fan Audio Light Kit

Featuring BLUETOOTH®Technology

6. WIRING THE LIGHT KIT TO THE FAN

REMEMBER to turn off the power before you

begin.

Step 1. Locate the blue and white wires inside

the ceiling fan switch cup for light connection.

Step 2. Connect the blue wire form the ceiling

fan switch cup to the black wire from the light kit.

Step 3. Connect the white wire from the ceiling

fan switch cup to the white wire from the light kit

by connecting the molded plugs together.

Step 4. Reattach the switch cup cover to the

ceiling fan switch cup and secure with the

screws that were removed in step of preparing

the fan.

7. INSTALLING THE GLASS BOWL FOR

FANS WITH PULL CHAINS

CAUTION: Do not over-tighten the hex nut.

Over-tightening the hex nut may cause the glass

bowl to crack or break.

Step 1. Pass the fan switch chain through the

hole of the pull chain guide.

Step 2. Remove the pre-installed nial, outer

bowl cap, hex nut and rubber washer from the

light kit and save them for later use.

Step 3. Align the glass bowl over the threaded

nipple and raise the glass bowl up to the light kit.

Step 4. Pass the chain through rubber washer,

hex nut and tighten them with the screw driver.

Step 5. Pass the chain through the outer bowl

cap and align it on the threaded nipple and lock

it with the nial. Finger tighten.

Step 6. Attach the pull chain extensions to the

light switch chain and the fan switch chain.

Switch cup

Switch cup cover

Screws

Light kit

Glass bowl

Pull chain

guide

Pull chain

extensions

Rubber washer

Hex rut

Pre-installed finial

Pull chain extensions

Outer bowl cap

Secondary Mode

Primary Mode

NOTE: The ceiling fan audio light kit with BLUETOOTH®Technology is compatible with iPhone, iPad,

Android, Blackberry, or similar devices whose BLUETOOTH protocol is compatible with 4.1 protocol. To

pair, ensure the light kit is powered up.

Step 1. Pull the chain switch of the light kit to ensure the light kit is powered up. The BLUETOOTH®

function turns on automatically.

Step 2. On your BLUETOOTH®enabled device, search for a new BLUETOOTH®device called “BT Audio

LK” under the list of devices available.

Step 3. Pairing is successful when you hear a short conrmation tone from the audio light kit.

Step 4. Start streaming audio from your music source.

Step 5. For some BLUETOOTH®devices and mobile phones, “Stereo Speaker” mode should be enabled

to stereo audio wireless.

Step 6. The audio light kit is compatible with the 4.1 protocol. Full BLUETOOTH®functionality and volume

control cannot be guaranteed if the audio source has an older BLUETOOTH protocol.

Step 7. To pair to a new BLUETOOTH®device, you need to disable the current paired device. Open

searching function of the new BLUETOOTH®device and repeat the pairing steps as previously

mentioned.

8. BLUETOOTH® PAIRING

LED Ceiling Fan Audio Light Kit

Featuring BLUETOOTH®Technology

9. BLUETOOTH® AUDIO PRIMARY AND SECONDARY FUNCTION

The primary instructions:

Step 1. If you are using the product without other Audio

Light Kits, the switch on the top of the light kit should

be placed into the Primary mode. When the unit is in

Primary mode, it can be connected via BLUETOOTH

allowing audio to be enjoyed via the speakers.

Step 2. If you have two Audio Light Kits, they can work

independently or work simultaneously by pairing. When

pairing, one unit must be placed into the primary mode

and the other unit must be placed into secondary mode.

The unit in secondary mode will then be able to receive

the audio signal from the primary unit.

Primary/Secondary Mode Pairing Instruction:

Keep the distance between the two audio light kits

under 10 meters and turn off power. One unit must

be placed into primary mode and the other must be

placed into secondary mode. Turn on both units at the

same time, the primary audio light kit will search for

the secondary audio light kit automatically within 30

seconds. Pairing is successful when you hear a short

conrmation tone from the audio light kit.

10. BLUETOOTH® AUDIO PLAY

Step 1. Once paired, you will be able to control the playback and volume through your device.

Step 2. If available on your device, access the sound settings or equalizer settings. Selecting the correct audio

prole or sometimes turning on the equalizer will improve the quality and maximum volume for the playback.

Step 3. If you wander out of range of the BLUETOOTH®device and the device is disconnected, simply move

closer to the audio light kit and re-click ”BT Audio LK”. Bluetooth device will regain connection; if the Bluetooth

device is still connected, then no pairing actions will be needed, the devices will regain the connection

automatically.

Step 4. The ceiling fan audio light kit with BLUETOOTH®Technology features a built-in privacy mode which

disconnects speaker playback when a phone call is being received from the device. It will automatically resume

playback when the call is completed.

NOTE:

Audio Light Kits must be turned on within 5 seconds from each other for the pairing to be successful.

Secondary Mode

Primary Mode

NOTE:

Only one secondary Audio Light Kit can be paired per primary Audio Light Kit.

Kichler®Lighting

7711 East Pleasant Valley Road

P.O. Box 318010

Cleveland, Ohio 44131-8010

Customer Service

866.558.5706

8:30 AM to 5:00 PM EST,

Monday - Friday

Guide d’instructions

Modèle ETL, luminaire à audio Bluetooth

Luminaire à audio

pour ventilateur de plafond à DEL

Avec la technologie BLUETOOTH®

380950

CODE D’IDENTIFICATION DE LA BTLK0380950. Le présent appareil est conforme aux CNR d’Industrie

1. CONSIGNES DE SÉCURITÉ (LISEZ ET CONSERVEZ CES INSTRUCTIONS)

1. Pour réduire les risques d’électrocution,

s’assurer que le courant est coupé au

niveau de la boîte de disjoncteurs ou de

fusibles avant de procéder à l’installation.

2. Tout le câblage doit être conforme aux

codes électriques locaux et au Code

électrique national. L’installation électrique

doit être effectuée par un électricien qualié

accrédité.

3. ATTENTION : Tout verre est fragile,

faites preuve de prudence lorsque vous

manipulez le diffuseur en verre.

4. ATTENTION : Pour éviter toute brûlure

accidentelle, laissez l’ampoule et le

diffuseur en verre refroidir complètement

avant de les toucher ou de les remplacer.

5. ATTENTION : Pour réduire les risques de

choc électrique, ce luminaire convient à une

utilisation dans les emplacements humides.

6. AVERTISSEMENT : En cas de

changement ou de modication apporté(e)

au produit, qui n’est pas expressément

approuvé(e) par la partie responsable

d’assurer la conformité, l’utilisateur pourrait

se voir refuser le droit d’utiliser l’appareil.

Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Ce produit peut causer des interférences gênantes pour l’équipement radiotéléphonique et ne doit pas être installé près

d’équipement de communications maritimes de sécurité, de navires en mer ou d’équipement de navigation critique ou

d’équipement de communication fonctionnant entre 0,45 et 30 MHz.

ATTENTION:

Pour réduire le risque de choc électrique, cette lumière doit être utilisé uniquement avec le modèle

de ventilateur ci-dessous:

Modèle: K52-403

Fabriqué par la société:

Chein Luen Industries (Zhongshat)LTD

POIDS NET.:5.6KGS,POIDS BRUT:7.9KGS

:10907A-

FCC ID:RGB-BTADLK380950

Table des matières

Langues :

Autres manuels Kichler Lighting Ventilateur

Kichler Lighting

Kichler Lighting Olympia Manuel utilisateur

Kichler Lighting

Kichler Lighting Imari 65 Manuel utilisateur

Kichler Lighting

Kichler Lighting BASICS PRO SELECT 330017MWH Manuel utilisateur

Kichler Lighting

Kichler Lighting Decor Link Manuel utilisateur

Kichler Lighting

Kichler Lighting 330163 Manuel utilisateur

Kichler Lighting

Kichler Lighting BASICS PRO PREMIER 330016WH Manuel utilisateur

Kichler Lighting

Kichler Lighting Lucia Manuel utilisateur

Kichler Lighting

Kichler Lighting 380106 Manuel utilisateur

Kichler Lighting

Kichler Lighting Universal 3 Light Fitter Manuel utilisateur

Kichler Lighting

Kichler Lighting Sola 330151 Mode d’emploi

Kichler Lighting

Kichler Lighting Lyndon 300120 Manuel utilisateur

Kichler Lighting

Kichler Lighting Kevlar 310150WCP Manuel utilisateur

Kichler Lighting

Kichler Lighting Porters Lake Manuel utilisateur

Kichler Lighting

Kichler Lighting Arkwright Manuel utilisateur

Kichler Lighting

Kichler Lighting Eris Manuel utilisateur

Kichler Lighting

Kichler Lighting Monarch Manuel utilisateur

Kichler Lighting

Kichler Lighting 35152 Manuel utilisateur

Kichler Lighting

Kichler Lighting Harbour Walk Patio Manuel utilisateur

Kichler Lighting

Kichler Lighting 35166 Manuel utilisateur

Kichler Lighting

Kichler Lighting Starkk 330180MWH Manuel utilisateur

Kichler Lighting

Kichler Lighting Cottage Grove Manuel utilisateur

Kichler Lighting

Kichler Lighting Bronson Manuel utilisateur

Kichler Lighting

Kichler Lighting Incus Manuel utilisateur

Kichler Lighting

Kichler Lighting Canfield Manuel utilisateur

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Hunter

Hunter 20714 Manuel d'instructions

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Hunter

Hunter Caraway Manuel d'instructions

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage