Keysight U1610/20A Manuel utilisateur

Keysight U1610/20A

Handheld Digital

Oscilloscope

Quick Start

Guide

Contacting Keysight

www.keysight.com/find/assist

(worldwide contact information for

repair and service)

Safety and EMC Information

This handheld scope is certified to

the following safety and EMC

requirements.

– IEC 61010-1/EN 61010-1, IEC

61010-2-033/EN 61010-2-033

– Canada: CAN/CSA-C22.2

No. 61010-1, CAN/CSA-C22.2

No. 61010-2-033

– USA: ANSI/UL Std. No. 61010-1,

ANSI/UL Std. No. 61010-2-033

– IEC 61326-1/EN 61326-1

– Australia/New Zealand: AS/NZS

CISPR 11

– Canada: ICES/NMB-001

Use with compatible test probe/

leads.

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly

performed or adhered to, could

result in damage to the product or

loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are

fully understood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly

performed or adhered to, could

result in personal injury or

death. Do not proceed beyond a

WARNING notice until the

indicated conditions are fully

understood and met.

Safety symbols

Direct current (DC)

Alternating current (AC)

Both direct and alternating

current

Earth (ground) terminal

Caution, risk of danger

(refer to the instrument

manual for specific Warning

or Caution information)

Equipment protected

throughout by double

insulation or reinforced

insulation

Caution, risk of electric

shock

CAT II Category II overvoltage

protection

CAT III Category III overvoltage

protection

2 Keysight U1610/20A Quick Start Guide

For further safety information details, refer to the

Keysight U1610/20A Handheld Digital Oscilloscope User’s Guide.

ENGLISH

Keysight U1610/20A Quick Start Guide 3

ENGLISH

Verify that you received the following items in the

shipment of your handheld scope:

4Power cable

4Li-Ion battery pack, 10.8 V (included in the

handheld scope)

4AC/DC adapter

410:1 CAT III 600 V scope probe

4BNC-to-probe adapter

4DMM (digital multimeter) test lead kit

4USB cable

Hand strap (attached on the handheld scope)

4Neck strap

4Certificate of Calibration

If anything is missing or damaged, contact the

nearest Keysight Sales Office.

NOTE All related documents and software are available for

download at www.keysight.com/find/hhTechLib.

4 Keysight U1610/20A Quick Start Guide

ENGLISH

Charge the Battery

Before using the handheld scope for the first time

or after a prolonged storage period, fully charge

the battery for at least 3 hours, with the handheld

scope turned off, using the AC/DC adapter

provided. If the battery is fully discharged after

subsequent use, charge the battery with the

handheld scope turned on.

The power key will turn constant yellow when

the battery is fully charged.

Keysight U1610/20A Quick Start Guide 5

ENGLISH

Power On the Handheld Scope

Press and hold for approximately 3 seconds.

When the handheld scope display appears, the

handheld scope is ready for use.

NOTE Hook up all cables and accessories before applying

power. You can connect/disconnect probes while

the handheld scope is turned on.

6 Keysight U1610/20A Quick Start Guide

ENGLISH

Product Outlook

Scope terminals

Display screen

Function softkeys

To perform the

function displayed

above each softkey.

Acquisition and

function controls

To access the scope,

meter, logger,

system, and help

functions.

Vertical controls

To set the

vertical scaling

(volt/div) and

vertical offset.

Power key

USB interface

connectorand

DC power

inlet

Directional keys

Horizontal controls

To control the sweep speed

(sec/div) and horizontal position

of the waveform. Use

to zoom into the waveform.

Meter terminals

Keysight U1610/20A Quick Start Guide 7

ENGLISH

Oscilloscope Display

Multimeter Display

1 5

8 Keysight U1610/20A Quick Start Guide

ENGLISH

Logger Display

1Displays the channel and timebase setup

information.

2Displays the channel input waveforms.

3Displays the sample rate.

4Displays the key/softkey function menus.

5Displays the signal acquisition mode.

6Displays the battery status and AC

connectivity for battery charging.

7Displays the signal triggering status.

8Displays the date and time.

9Displays the acquisition, start date and time,

and duration status.

10 Displays the measurement.

11 Displays the virtual measurement scale.

12 Displays the average, maximum, and

minimum values.

13 Indicates the auto or manual ranging mode.

14 Displays the logging graph.

Keysight U1610/20A Quick Start Guide 9

ENGLISH

Set the Date and Time

Press > > . Press

any softkey and use the or key to change

the values.

Set the Language

Press > > and use

the keys to select the language.

Press again to exit the selection menu.

Reset the Oscilloscope

Press > .

NOTE is only accessible when in the Scope

mode.

NOTE Before resetting to factory default settings, you may

want to save the current handheld scope

configuration for later use by pressing >

NOTE For details on using the oscilloscope functions, see

the User’s Guide.

10 Keysight U1610/20A Quick Start Guide

ENGLISH

Data Logging

The data logger acts as a recorder to log and plot

input signal trends for both scope and meter

measurements.

To access the logger mode, press .

Connect Probes to Oscilloscope Terminals

NOTE For details on using the logger functions, see the

User’s Guide.

Table des matières

Langues :

Autres manuels Keysight Équipement de test

Keysight

Keysight 16048D Manuel d'utilisation

Keysight

Keysight M8050A Manuel utilisateur

Keysight

Keysight TS-5020 Mode d'emploi

Keysight

Keysight E6610A Mode d'emploi

Keysight

Keysight M8000 Series Manuel utilisateur

Keysight

Keysight 85053A Manuel

Keysight

Keysight 85132E Fiche technique

Keysight

Keysight Infiniium S Series Manuel utilisateur

Keysight

Keysight N2840A Manuel utilisateur

Keysight

Keysight ZA0060A Manuel utilisateur

Keysight

Keysight 1000A Series Manuel utilisateur

Keysight

Keysight 42030A Manuel d'utilisation

Keysight

Keysight InfiniiVision 1200 X Series Manuel utilisateur

Keysight

Keysight E6650A EXF Manuel du propriétaire

Keysight

Keysight U3042AE16 Manuel

Keysight

Keysight 1000B Series Manuel utilisateur

Keysight

Keysight EDUX1052A Manuel utilisateur

Keysight

Keysight N1000A DCA-X Series Manuel utilisateur

Keysight

Keysight TS-5020 Manuel utilisateur

Keysight

Keysight Infiniium 90000A Series Manuel utilisateur

Keysight

Keysight E6953A Manuel d'utilisation

Keysight

Keysight M8000 Series Manuel utilisateur

Keysight

Keysight U1452AT Manuel utilisateur

Keysight

Keysight U1610A Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur