Keysight U8903A Manuel utilisateur

Keysight Technologies

U8903A Audio Analyzer

Creating a Custom Filter for the

U8903A Audio Analyzer

Demo Guide

This demonstration will teach you how to create your own custom lter for the Keysight Technologies, Inc.

U8903A Audio Analyzer by using the MATLAB software on your computer.

Table of Contents

Demonstration Objectives 2

Step 1: Matlab fdatool

(lter design and analysis tool)

Step 2: Create Filter 4

Step 3: Export Filter

Coefcient

Step 4: Settling Time (Delay) 9

Step 5: Transfer to .juf le 11

S tep 6: Upload .juf le to

U8903A Audio Analyzer

Conclusion 14

Ordering Information and

Related Literature 15

Demonstration objectives

Steps to create a custom lter

Follow the steps below to create your own custom lter for the U8903A.

Steps

1. Matlab fdatool (lter design and analysis tool)

2. Create Filter

3. Export Filter Coefcient

4. Settling Time (Delay)

5. Transfer to .juf le

6. Upload .juf le to U8903A Audio Analyzer

Matlab fdatool (Filter Design and Analysis Tool)

Step 1

Figure 1. MATLAB command window

Figure 2. Filter Design and Analysis Tool

Instructions

1. Start MATLAB program (Figure 1)

2. In the command window, type “fdatool” to start Filter Design and Analysis Tool in MATLAB (Figure 2)

Create lter

Step 2

Figure 3. “Set quantization parameter” icon

Figure 4. Selecting “Single-precision oating-point” and “Return to the Design Filter page”

Instructions

1. Click on “Set quantization parameter” (Figure 3)

2. Select “Single-precision oating-point” because the architecture of the U8903A is 32 bits (Figure 4)

3. Return to the Design Filter page (Figure 4)

Instructions

4. Select the “Response Type” e.g. Lowpass, Highpass, Bandpass, and Bandstop (Figure 5)

5. Select the “Design Method” e.g. IIR or FIR (Figure 5)

6. Select the “Frequency Specications” you require e.g. Fpass (1 and 2), Fstop (1 and 2) (Figure 5)

Requirements for Frequency Specications:

– Low Bandwidth = 78125 Hz

– High Bandwidth = 312500 Hz

7. Select the “Magnitude Specications” e.g. Wpass (1 and 2), Wstop (1 and 2) (Figure 5)

8. Press the “Design Filter” button (Figure 5)

Figure 5. Selecting “Response Type”, “Design Method”, “Frequency Specications”, “Magnitude Specication”, and Press “Design Filter” Button

Instructions

9. The “Order” number (see Figure 6) must be less than 256 in order to meet the architecture of the U8903A Audio Analyzer. Changing

the “Design Method” will change the order number.

Figure 6. Order number must be less than 256

Export lter coefcient

Figure 7. Exporting Filter Coefcient Information to a le

Instructions

1. Go to “File”, then select “Export...”

2. At “Export To”, select “Coefcient File (ASCII)”

3. Click on “Export” button, and Save to *.fcf le

4. The Filter Coefcient Data File will then be displayed

Export lter coefcient information to a le (gure 7)

Step 3

Figure 8. Export Filter Coefcient as an object for analysis

Instructions

1. Go to “File”, then select “Export...”

2. At “Export To”, select “Workspace”

3. At “Export As”, select “Object”

4. At “Variable Names”, for “Discrete Filter”, enter “Hd”, then click the “Export” button

5. The Hd object is then in the MATLAB window

Export lter coefcient as an object for analysis (Figure 8)

Settling time (Delay)

Step 4

Knowing the settling time of your lter

You can know the settling time for your lter by creating a 20 Hz Sine Wave for testing the lter you just created using the

MATLAB software

Instructions

In the MATLAB command window

1. Type in the code below:

– fs = 78125

– f = 20

– n = 1:65536

– xn = sin(2*pi*f*n/fs)

These objects (fs, f, n, and xn) are now created in Matlab (Figure 9):

– fs (Frequency Sampling): 78125 for low bandwidth 312500 for high bandwidth

– f(Frequency): 20 Hz

– n(Points): 1 to 65536

– xn (20 Hz Sine wave)

2. Type in the code below to plot the 20 Hz sine wave:

– plot(xn,’DisplayName’,’xn’,’YDataSource’,’xn’);gure(gcf);

A 20 Hz Sine wave graph (Figure 10) is created.

Figure 9. MATLAB command window and objects

Figure 10. 20 Hz Sine wave

Step 4

Applying lter to the 20 Hz Sine wave

Instructions

In the MATLAB command window

1. Type in the code below to apply lter to 20 Hz sine wave (Figure 11) :

–l=lter(Hd,xn);

Objects lter is now created in MATLAB

2. Type in the code below to plot the result:

–plot(l,’DisplayName’,’l’,’YDataSource’,’l’);gure(gcf);

A 20 Hz Sine wave graph with the lter applied (Figure 12) is created.

3. By zooming into the graph you are able to search for the result (Figure 12)

Result after applying lter with 20 Hz Sine wave:

–Noise level will be ne after 4000 samples

Figure 11. MATLAB command window and objects

Figure 12. Zooming into the graph to see in-depth result

Autres manuels pour U8903A

Table des matières

Autres manuels Keysight Instrument de mesure

Keysight

Keysight x-series Manuel utilisateur

Keysight

Keysight x series Manuel utilisateur

Keysight

Keysight N432A Mode d'emploi

Keysight

Keysight N5264A Manuel utilisateur

Keysight

Keysight U2781A Manuel utilisateur

Keysight

Keysight HSA N9342C Manuel utilisateur

Keysight

Keysight PNA Series Guide de démarrage rapide

Keysight

Keysight 1146B Manuel utilisateur

Keysight

Keysight N4376E Manuel utilisateur

Keysight

Keysight M9290A Manuel utilisateur

Keysight

Keysight N9030A Manuel utilisateur

Keysight

Keysight N9912A Manuel utilisateur

Keysight

Keysight u1701b Manuel

Keysight

Keysight 8990B Mode d'emploi

Keysight

Keysight N5227BU-420 Manuel utilisateur

Keysight

Keysight EPM Series Manuel utilisateur

Keysight

Keysight N774-C Series Manuel utilisateur

Keysight

Keysight x-series Manuel du propriétaire

Keysight

Keysight M9703A Series Guide rapide

Keysight

Keysight E4990A Manuel d'utilisation et d'entretien

Keysight

Keysight N6854A Manuel utilisateur

Keysight

Keysight InfiniiMax III+ Series Manuel utilisateur

Keysight

Keysight M9614A Manuel de l'opérateur

Keysight

Keysight EXA X-Series N9010A Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

ADTEK

ADTEK MW-5 Manuel utilisateur

Acterna

Acterna MS1400 Manuel utilisateur