Keysight Technologies E6640A Manuel utilisateur

Getting Started

Guide

Keysight E6640A EXM Wireless Test Set

Notice: This document contains references to Agilent.

Please note that Agilent’s Test and Measurement busi-

ness has become Keysight Technologies. For more in-

formation, go to www.keysight.com.

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

E6640-90001

Print Date

October 28, 2014

Published in USA

Keysight Technologies, Inc.

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Warranty

THE MATERIAL CONTAINED IN THIS DOCU-

MENT IS PROVIDED “AS IS,” AND IS SUB-

JECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER,

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DISCLAIMS

ALL WARRANTIES, EITHER EXPRESS OR

IMPLIED WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL OR CON-

SEQUENTIAL DAMAGES IN CONNECTION

WITH THE FURNISHING, USE, OR PERFOR-

MANCE OF THIS DOCUMENT OR ANY

INFORMATION CONTAINED HEREIN.

SHOULD KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT WITH

WARRANTY TERMS COVERING THE MATE-

RIAL IN THIS DOCUMENT THAT CONFLICT

WITH THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE AGREEMENT

WILL CONTROL.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of a

U.S. Government prime contract or subcon-

tract, Software is delivered and licensed as

“Commercial computer software” as defined

in DFAR 252.227-7014 (June 1995), or as a

“commercial item” as defined in FAR

2.101(a) or as “Restricted computer soft-

ware” as defined in FAR 52.227-19 (June

1987) or any equivalent agency regulation or

contract clause. Use, duplication or disclo-

sure of Software is subject to Keysight Tech-

nologies’ standard commercial license

terms, and non-DOD Departments and

Agencies of the U.S. Government will receive

no greater than Restricted Rights as defined

in FAR 52.227-19(c)(1-2) (June 1987). U.S.

Government users will receive no greater

than Limited Rights as defined in FAR

52.227-14 (June 1987) or DFAR 252.227-

7015 (b)(2) (November 1995), as applicable

in any technical data.

Safety Notices

A CAUTION notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a CAU-

TION notice until the indicated con-

ditions are fully understood and

met.

A WARNING notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in personal

injury or death. Do not proceed

beyond a WARNING notice until the

indicated conditions are fully

understood and met.

Trademark Acknowledgements

Bluetooth is a trademark owned by

Bluetooth SIG, Inc., U.S.A, and licensed

to Keysight Technologies.

cdma2000 is a US registered certifica-

tion mark of the Telecommunications

Industry Association.

WiMAX is a US trademark of the WiMAX

Forum.

Licensed under the Apache License, Version

2.0 (the "License"); you may not use this file

except in compliance with the License.

You may obtain a copy of the License at:

http://www.apache.org/licenses/LICENSE-

2.0

Unless required by applicable law or agreed

to in writing, software distributed under the

License is distributed on an "AS IS" BASIS

WITHOUT WARRANTIES OR CONDITIONS

OF ANY KIND, either express or implied.

See the License for the specific language

governing permissions and limitations under

the License.

In This Guide…

This guide contains the following information:

1 Quick-Start

This chapter explains how to initialize the test set and generate and view a

signal.

2 Front and Rear Panel Features

Refer to this chapter for information on front- and rear-panel key functionality,

and display annotations.

3 Operating Tasks

This chapter describes the various operating tasks and the procedures for

carrying out those tasks.

4 Test Set Operating System

This chapter describes the Microsoft Windows configuration and the settings

used with the Keysight test set software.

5 Using Microsoft Windows

The information in this chapter provides some guidelines for using the

Microsoft Windows feature capabilities with the test set.

6 Troubleshooting

This chapter details some basic steps that may solve any problems you are

experiencing with either the test set or Microsoft Windows.

Warranty

This Keysight Technologies product is warranted against defects in material and

workmanship for a period of one year from the date of shipment. during the warranty

period, Keysight Technologies will, at its option, either repair or replace products that prove

to be defective.

For warranty service or repair, this product must be returned to a service facility designated

by Keysight Technologies. Buyer shall prepay shipping charges to Keysight Technologies

shall pay shipping charges to return the product to Buyer. However, Buyer shall pay all

shipping charges, duties, and taxes for products returned to Keysight Technologies from

another country.

Where to Find the Latest Information

Documentation is updated periodically. For the latest information about this test set,

including firmware upgrades, application information, and product information, see the

following URLs:

http://www.keysight.com/find/e6640a

Information on preventing test set damage can be found at:

http://www.keysight.com/find/PreventingInstrumentRepair

Getting Started Guide 5

Contents

1 Quick-Start

About the Test Set 12

Initial Inspection 14

Shipping problems? 15

Test Set Location and Mounting Requirements 16

Locating the test set 16

Cooling and rack mounting 16

Turning on the test set the first time 17

Initializing the test set using a USB mouse and external monitor 17

Options and Licenses 21

Option 4FD 22

Anti-Virus Software and Firewalls 23

Shortening the Test Set Power-On Time 23

Instrument Information 24

Power requirements 24

Environmental Conditions (Operating) 25

Ventilation 26

Instrument Maintenance 26

Protecting against electrostatic discharge 28

2 Front and Rear Panel Features

Front-Panel Features 30

Controller Hardware Interface 31

TRX Module Hardware Interface 33

Reference Module Hardware Interface 35

Virtual Front Panel 36

When the Test Set is Controlled Remotely 37

6Getting Started Guide

Display Annotations 38

Rear-Panel Features 40

Front and Rear Panel Symbols 41

3 Operating Tasks

Alignments 44

“All” Alignment (daily use) 44

Weekly alignment procedure 44

TRX Selection 45

Using HiSLIP 45

Using Socket Ports 46

Using VXI-11/SICL 46

Using Telnet Connection 46

E6640A Calibration Status 47

Certificates of Calibration 48

Desktop Icons 50

TRX Configurator 50

Launch XSA 51

Configure Applications 51

Port Configuration 52

Full Duplex Port Setup (RFIO 1 and RFIO 2) 52

Separate Input and Output Port Setup (RF3 I|O and RF4 I|O) 54

Separate Input and Output Port Setup (RFIO 1 and RFIO 2) 57

Option 4FD: Full Duplex Port Setup 59

Option 4FD: Separate Input and Output Port Setup 60

LAN Address Configuration 61

Switched MIMO 62

Constraints on Radio Standards 62

MIMO Port Configuration 62

Source Sync Control 63

RF Input Port Mode 63

Half Duplex RF Input 63

Acquisition Triggers 64

Acquisition Integration 64

Acquisition RF Input Port 65

Switched MIMO Modulation Accuracy measurement SCPI commands 66

Getting Started Guide 7

Switched MIMO Results 68

True MIMO 70

TRX Configurations 70

Source Settings for MIMO 72

Constraints on TRX Selection 73

Constraints on Radio Standards 73

MIMO Type 73

Remote Analyzer Configuration 73

MIMO Modulation Analysis measurement SCPI commands 76

MIMO Modulation Analysis Results 77

Tx Beam Forming 79

Tx Beam Forming Commands 79

Tx Beam Forming Results 80

4 Test Set Operating System

Keysight Software Installed 82

Measurement Software Applications 82

Customer Installation of Software 83

3rd party software verified by Keysight 83

Installation of other 3rd party software 83

User Accounts 84

Administrator login 84

User login 84

KeysightOnly user account 84

Keysight service user accounts 84

Customer creation of accounts 85

Keysight Licensing Options 86

Time-Limited Licenses (Trial Licenses) 87

Licensing New Measurement Application Software - After Initial Purchase 88

Installation procedure over USB 88

Transporting a License Between Test Sets 90

Procedure for Transporting a License, Neither Test Set Connected to the

Internet 90

Windows Configuration 93

Settings that can be changed 93

8Getting Started Guide

Settings that must not be changed 94

Configuring Printers 96

Configuring LAN 96

Hostname 96

IP Address & Gateway 96

Windows Security 97

Windows Firewall 98

Automatic updates 99

Virus protection 100

Spyware protection 100

System Maintenance 101

Backup 101

System restore 101

Disk defragmenting 101

USB Connections 102

Hard Drive Partitioning and Use 103

Hard Drive Recovery Process 104

Updating the software 106

Configuring recovery prompt timing 112

5 Using Microsoft Windows Operating System

Navigating Windows Without a Mouse 114

Remote Desktop: Using the Test Set Remotely 115

Overview of Remote Desktop operation 115

Setting up Remote Desktop operation 115

How to locate the computer name of the test set 117

Running a Remote Desktop session 118

The Virtual Front Panel 128

Programmatic Control of the Test Set 129

Capturing/Printing Displays and Windows 130

Windows Shortcuts and Miscellaneous Tasks 131

Windows shortcuts (key combinations) 131

Windows taskbar auto-hide feature 133

Windows startup folder 135

Getting Started Guide 9

6 Troubleshooting

Check the Basics 138

Problems with Microsoft Windows Operating System 140

Returning a test set for Service 141

Calling Keysight Technologies 141

Locations for Keysight Technologies 141

Read the Warranty 142

Service Options 142

Packaging the Test Set 143

Index

10 Getting Started Guide

Autres manuels pour E6640A

Table des matières

Autres manuels Keysight Technologies Équipement de test

Keysight Technologies

Keysight Technologies U1610/20A Manuel utilisateur

Keysight Technologies

Keysight Technologies M8000 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies U3045AM04 Manuel

Keysight Technologies

Keysight Technologies U2941A Manuel utilisateur

Keysight Technologies

Keysight Technologies U3047AM12 Manuel

Keysight Technologies

Keysight Technologies N7015A Manuel utilisateur

Keysight Technologies

Keysight Technologies N5222-60124 Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies 85041A Manuel de service

Keysight Technologies

Keysight Technologies 85038A 7-16 Manuel

Keysight Technologies

Keysight Technologies E6640A Manuel utilisateur

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X-Series Manuel utilisateur

Keysight Technologies

Keysight Technologies 16380V Manuel d'utilisation

Keysight Technologies

Keysight Technologies 16454A Manuel d'utilisation

Keysight Technologies

Keysight Technologies E4982A Manuel utilisateur

Keysight Technologies

Keysight Technologies N4891A Manuel utilisateur

Keysight Technologies

Keysight Technologies InfiniiVision M9241A Manuel utilisateur

Keysight Technologies

Keysight Technologies Infiniium 9000 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies 1000A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies Infiniium MXR Series Manuel utilisateur

Keysight Technologies

Keysight Technologies U3042AM20 Manuel

Keysight Technologies

Keysight Technologies 11683AZ Option H01 Manuel de service

Keysight Technologies

Keysight Technologies U9361G Manuel utilisateur

Keysight Technologies

Keysight Technologies N7700 Manuel utilisateur

Keysight Technologies

Keysight Technologies N5990A-301 Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur