Keysight Technologies M9155C PXI Manuel utilisateur

Keysight M9155/6/7C PXI

Hybrid Coaxial Switch Module

(DC to 26.5 GHz) and M9161D

PXI Solid State Switch Module

(50 MHz to 20 GHz)

Startup and

Service Guide

2 Keysight M9155/6/7C and M9161D Startup and Service Guide

Notices

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies as governed by

United States and international

Manual Part Number

M9157-90001

Edition

Edition 4, November 25, 2016

Printed in Malaysia

Published by:

Keysight Technologies

Bayan Lepas Free Industrial Zone,

11900 Penang, Malaysia

Sales and Technical Support

To contact Keysight for sales and

technical support, refer to the support

links on the following Keysight

websites:

www.keysight.com/find/PXIswitch

(product-specific information and

support, software and documentation

updates)

www.keysight.com/find/assist

(worldwide contact information for

repair and service)

Declaration of Conformity

Declarations of Conformity for this

product and for other Keysight

products may be downloaded from the

Web. Go to http://www.keysight.com/

go/conformity. You can then search by

product number to find the latest

Declaration of Conformity.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS,"

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO THE

MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES, EITHER

EXPRESS OR IMPLIED WITH REGARD

TO THIS MANUAL AND ANY

INFORMATION CONTAINED HEREIN,

INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS

OR FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS DOCUMENT

OR ANY INFORMATION CONTAINED

HEREIN. SHOULD KEYSIGHT AND THE

USER HAVE A SEPARATE WRITTEN

AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN

THIS DOCUMENT THAT CONFLICT

WITH THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance with

the terms of such license.

Restricted Rights Notices

If software is for use in the performance

of a U.S. Government prime contract or

subcontract, Software is delivered and

licensed as "Commercial computer

software" as defined in DFAR

252.227-7014 (June 1995), or as a

"commercial item" as defined in FAR

2.101(a) or as "Restricted computer

software" as defined in FAR 52.227-19

(June 1987) or any equivalent agency

regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Keysight Technologies'

standard commercial license terms,

and non-DOD Departments and

Agencies of the U.S. Government will

receive no greater than Restricted

Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S.

Government users will receive no

greater than Limited Rights as defined

in FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995),

as applicable in any technical data.

Keysight M9155/6/7C and M9161D Startup and Service Guide 3

General Safety Information

The following safety precautions should be observed before using this product

and any associated instrumentation.

This product is intended for use by qualified personnel who recognize shock

hazards and are familiar with the safety precautions required to avoid any possible

injury. Read and follow all installation, operation, and maintenance information

carefully before using this product. Refer to the user documentation for complete

product specifications.

The types of product users are:

– Responsible body who is the individual or group responsible for the use and

maintenance of equipment, for ensuring that the equipment is operated within

its specifications and operating limits, and for ensuring that operators are

adequately trained.

– Operators who use the product for its intended function. They must be trained

in electrical safety procedures and proper use of the instrument. They must be

protected from electric shock and contact with hazardous live circuits.

– Maintenance personnel who perform routine procedures on the product to

keep it operating properly (for example, setting the line voltage or replacing

consumable materials). Maintenance procedures are described in the user

documentation. The procedures explicitly state if the operator may perform

them. Otherwise, they should be performed only by service personnel.

– Service personnel who are trained to work on live circuits, perform safe

installations, and repair products. Only properly trained service personnel may

perform installation and service procedures.

Keysight products are designed for use with electrical signals that are rated

Measurement Category I and Measurement Category II, as described in the

International Electrotechnical Commission (IEC) Standard IEC 60664.

WARNING

If this product is not used as specified, the protection provided by the

equipment could be impaired. This product must be used in a normal

condition (in which all means for protection are intact) only.

4 Keysight M9155/6/7C and M9161D Startup and Service Guide

Most measurement, control, and data I/O signals are rated Measurement

Category I and must not be directly connected to mains voltage or to voltage

sources with high transient over-voltages. Measurement Category II connections

require protection for high transient over-voltages often associated with local AC

mains connections. Assume all measurement, control, and data I/O connections

are for connection to Category I sources unless otherwise marked or described in

the user documentation.

Exercise extreme caution when a shock hazard is present. Lethal voltage may be

present on cable connector jacks or test fixtures. The American National

Standards Institute (ANSI) states that a shock hazard exists when voltage levels

greater than 30 Vrms, 42.4 Vpeak, or 60 VDC are present. A good safety practice

is to expect that hazardous voltage is present in any unknown circuit before

measuring.

Operators of this product must be protected from electric shock at all times. The

responsible body must ensure that operators are prevented access and/or

insulated from every connection point. In some cases, connections must be

exposed to potential human contact. Product operators in these circumstances

must be trained to protect themselves from the risk of electric shock. If the circuit

is capable of operating at or above 1000 V, no conductive part of the circuit may

be exposed.

Do not connect switching cards directly to unlimited power circuits. They are

intended to be used with impedance-limited sources. NEVER connect switching

cards directly to AC mains. When connecting sources to switching cards, install

protective devices to limit fault current and voltage to the card.

Before operating an instrument, ensure that the line cord is connected to a

properly-grounded power receptacle. Inspect the connecting cables, test leads,

and jumpers for possible wear, cracks, or breaks before each use.

When installing equipment where access to the main power cord is restricted,

such as rack mounting, a separate main input power disconnect device must be

provided in close proximity to the equipment and within easy reach of the

operator.

For maximum safety, do not touch the product, test cables, or any other

instruments while power is applied to the circuit-under-test. ALWAYS remove

power from the entire test system and discharge any capacitors before connecting

or disconnecting cables or jumpers, installing or removing switching cards, or

making internal changes, such as installing or removing jumpers.

Keysight M9155/6/7C and M9161D Startup and Service Guide 5

Do not touch any object that could provide a current path to the common side of

the circuit-under-test or power line (earth) ground. Always make measurements

with dry hands while standing on a dry, insulated surface capable of withstanding

the voltage being measured.

The instrument and accessories must be used in accordance with its

specifications and operating instructions, or the safety of the equipment may be

impaired.

Do not exceed the maximum signal levels of the instruments and accessories, as

defined in the specifications and operating information, and as shown on the

instrument or test fixture panels, or switching card.

When fuses are used in a product, replace with the same type and rating for

continued protection against fire hazard.

Chassis connections must only be used as shield connections for measuring

circuits, NOT as safety earth ground connections.

If you are using a test fixture, keep the lid closed while power is applied to the

device-under-test. Safe operation requires the use of a lid interlock.

Instrumentation and accessories shall not be connected to humans.

Before performing any maintenance, disconnect the line cord and all test cables.

To maintain protection from electric shock and fire, replacement components in

mains circuits — including the power transformer, test leads, and input jacks —

must be purchased from Keysight. Standard fuses with applicable national safety

approvals may be used if the rating and type are the same. Other components

that are not safety-related may be purchased from other suppliers as long as they

are equivalent to the original component (note that selected parts should be

purchased only through Keysight to maintain accuracy and functionality of the

product).

If you are unsure about the applicability of a replacement component, call a

Keysight office for information.

WARNING

No operator serviceable parts inside. Refer servicing to qualified personnel.

To prevent electric shock, do not remove covers.

6 Keysight M9155/6/7C and M9161D Startup and Service Guide

Front and Rear Panel Symbols

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

ICES/NMB-001 indicates that this

ISM device complies with the

Canadian ICES-001.

Cet appareil ISM est conforme a la

norme NMB-001 du Canada.

ISM GRP.1 Class A indicates that

this is an Industrial Scientific and

Medical Group 1 Class A product.

The RCM mark is a registered

trademark of the Australian

Communications and Media Authority.

This instrument complies with the

WEEE Directive (2002/96/EC)

marking requirement. This affixed

product label indicates that you

must not discard this electrical or

electronic product in domestic

household waste.

This symbol indicates the time period

during which no hazardous or toxic

substance elements are expected to

leak or deteriorate during normal use.

Forty years is the expected useful life

of the product.

This symbol indicates that PXI is a

U.S. registered trademark of the

PXI System Alliance.

This equipment is Class A suitable for professional use and is for use in electromagnetic

environments outside of the home.

xxx-

xxxxxxxx

Keysight M9155/6/7C and M9161D Startup and Service Guide 7

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/

96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not discard this

electrical or electronic product in domestic household waste.

Product category:

With reference to the equipment types in the WEEE directive Annex 1, this

instrument is classified as a “Monitoring and Control Instrument” product.

The affixed product label is as shown below.

Do not dispose in domestic household waste.

To return this unwanted instrument, contact your nearest Keysight Service Center,

or visit http://about.keysight.com/en/companyinfo/environment/takeback.shtml

for more information.

8 Keysight M9155/6/7C and M9161D Startup and Service Guide

Cleaning Precautions

WARNING

To prevent electric shock, disconnect the instrument from mains before

cleaning. Use a dry cloth or one slightly dampened with water to clean the

external case parts. Do not attempt to clean internally. To clean the

connectors, use alcohol in a well-ventilated area. Allow all residual alcohol

moisture to evaporate, and the fumes to dissipate prior to energizing the

instrument.

Keysight M9155/6/7C and M9161D Startup and Service Guide 9

Table of Contents

General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Front and Rear Panel Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/

EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Product category: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Cleaning Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

1 Getting Started

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Related documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Product model description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Step 1: Unpack and Inspect the M9155/6/7C and M9161D . . . . . . . . .17

ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Inspect for damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Return for service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Step 2: Verify M9155/6/7C and M9161D Shipment Contents . . . . . . .19

Step 3: Install the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Power up the host PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Install the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Step 4: Install the M9155/6/7C and M9161D . . . . . . . . . . . . . . . . . . . .22

Step 5: Verify the M9155/6/7C and M9161D Operation . . . . . . . . . . . .25

2 Service and Maintenance

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Clean the connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Make good connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

10 Keysight M9155/6/7C and M9161D Startup and Service Guide

THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Keysight Technologies Changer

Keysight Technologies

Keysight Technologies N5247-60102 Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies 34937A Manuel utilisateur

Keysight Technologies

Keysight Technologies 34945A Manuel utilisateur

Keysight Technologies

Keysight Technologies 34937A Manuel utilisateur

Keysight Technologies

Keysight Technologies M9170A Manuel utilisateur

Keysight Technologies

Keysight Technologies U9397A Manuel de service

Keysight Technologies

Keysight Technologies N1810 Series Manuel de service

Keysight Technologies

Keysight Technologies L7222C Manuel de service

Keysight Technologies

Keysight Technologies E4360 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies B2200 Manuel utilisateur

Keysight Technologies

Keysight Technologies 34902A Manuel utilisateur

Keysight Technologies

Keysight Technologies L4490A Manuel utilisateur

Keysight Technologies

Keysight Technologies 8710 Series Manuel de service

Keysight Technologies

Keysight Technologies U9400A Manuel de service

Keysight Technologies

Keysight Technologies 87104A SP4T Manuel de service

Keysight Technologies

Keysight Technologies 87606Q Manuel de service

Keysight Technologies

Keysight Technologies E4360 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies 87406B Guide d'installation

Keysight Technologies

Keysight Technologies 34970A Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur