KERN TGC Series Manuel utilisateur

KERN & Sohn GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: info@kern-sohn.com

Tel.: +49-[0]7433- 9933-0

Fax: +49-[0]7433-9933-149

internet: www.kern-sohn.com

Operating manual

Electronic pocket scales

KERN TGC

Version 1.0

2018-07

TGC-BA-e-1810

TGC-BA-e-1810 2

KERN TGC

Version 1.0 2018-07

Operating manual

Electronic pocket scales

1. Technical data

KERN TGC 150-2 TGC 500-1-A TGC 1K-3

Item no./ Type TTGC 150-2-A TGC 500-1-A TGC 1K-3-A

Readability (d) 0.01 g 0.1 g 1 g

Weighing range (max) 150 g 500 g 1000 g

Adjustment weight, not added (class) 50 g / 150 g (M2) 500 g (M3) 1000 g (M3)

Operating temperature + 0°....+ 40°C

Humidity of air 20% ∼80% air humidity (non-condensing)

Batteries 2 x CR2032

2. Scope of delivery

•Pocket scale

•Balance cover

•Batteries (2 x CR2032)

•Operating manual

3. Keyboard overview

Switch-over weighing unit

Background illumination of the display on/off

Taring / Setting to zero

Switch on/off

4. Operation

Weighing:

Place the balance on a firm, level surface.

Press ON/OFF button, the balance completes a self check. As soon as the weight display appears,

the balance is ready for weighing. If required, set to zero by using TARE button.

Place load on pan and read the weighing result.

If necessary, use the UNIT button to switch over into the available weighing units.

3 TGC-BA-e-1810

Taring:

Deposit empty weighing container.

Press the TARE button, the zero display disappears.

Weigh the material, the net weight will be displayed.

When the balance is unloaded the saved taring value is displayed with negative sign.

To delete the stored tare value, remove load from weighing pan and press the TARE button.

5. Adjustment

Arrange adjustment weight (see chap. 1).

Info about adjustment weights can be found on the Internet at: http://www.kern-sohn.com

Ensure that there are no objects on the weighing pan.

In weighing mode keep the UNIT button pressed until <CAL> appears.

Press the ON/OFF button again and wait until the weight value of the required adjustment weight

will appear flashing.

Place adjustment weight. Wait until <PASS>, followed by the weight value of the placed

adjustment weight will be displayed. After that the adjustment will be finished successfully.

In case of a diverging display the adjustment has failed. Repeat adjustment process.

6. Important Notes

•Do not overload balance.

•The occurrence of electromagnetic fields may result in major display deviations. Then change

location.

•Avoid high air humidity, vapours and dust.

•Do not bring the balance directly in contact with liquids.

•Do not leave permanent load on the weighing pan.

•Never operate balance in explosive environment. The serial version is not

explosion protected.

•Check the balance regularly with external test weights.

•Warranty claims will be voided when the housing is opened.

7. Declaration of conformity

The current EC/EU Conformity declaration can be found online in:

www.kern-sohn.com/ce

Ce manuel convient aux modèles suivants

Autres manuels KERN Échelle

KERN

KERN MBE 20K10 Manuel utilisateur

KERN

KERN PCD 10K0.1 Manuel utilisateur

KERN

KERN EOC Series Manuel utilisateur

KERN

KERN TKFP 15V30M-A Manuel utilisateur

KERN

KERN FCF Manuel utilisateur

KERN

KERN EWJ 300-3 Manuel utilisateur

KERN

KERN FXN-N Series Manuel utilisateur

KERN

KERN AEJ-C Series Manuel utilisateur

KERN

KERN CME 1000-2 Manuel utilisateur

KERN

KERN KXS-TM Manuel utilisateur

KERN

KERN NTEP Series Manuel de service

KERN

KERN PCB Manuel utilisateur

KERN

KERN FCD 10K-3 Manuel utilisateur

KERN

KERN TEE 150-1 Manuel utilisateur

KERN

KERN MPC M Series Manuel utilisateur

KERN

KERN TAB Manuel utilisateur

KERN

KERN MGD Series Manuel utilisateur

KERN

KERN TEB Manuel utilisateur

KERN

KERN RFC Manuel utilisateur

KERN

KERN FIS Manuel utilisateur

KERN

KERN FKT Manuel utilisateur

KERN

KERN GAB 3K1DM Manuel utilisateur

KERN

KERN EG 220-3NM Manuel utilisateur

KERN

KERN MWA Series Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur