BioSync Fingerprint Readers
- 4 -P/N: 02384-001 - Rev C
The B100-KP biometric keypad reader is a Wiegand biometric fingerprint reader and
keypad for indoors and outdoors access control applications and features a backlight
and programmable Wiegand output.
It offers storage of up to 100 fingerprints, programmable Wiegand output (8 to 128 bits)
and selectable PIN code length. There is also a tamper switch which is activated if an
attempt is made to open or remove the unit from the wall. You can wire the tamper
switch into an available input (for example, on a 4x4 module) and then set up an aler-
t/sound alert within Doors.NET.
2.0 Mounting Instructions
If the biometric reader is installed and used outdoor, the reader MUST be fitted with the
MCD-MINI metal cover available in our accessories in order to protect the sensor from
direct rainfall. The operating temperature of the product is between -15ºC - + 50ºC. If
the reader is installed in an environment where the temperature can drop below -10ºC
or/and if the sensor could only be exposed to direct sunlight, it is strongly recommended
to install the reader inside a third party sealed wall mount box (fitted with additional
heater if very low temperature) to keep a constant sensor level performance. Keri Sys-
tems™ cannot guarantee the functionality of the product if measures and advice before
are not followed.
