Kenwood TK-5210 Manuel utilisateur

09 08 07 06 05 04 03 02 01 00

INSTRUCTION MANUAL

VHF APCO P25 TRANSCEIVER

TK-5210

THANK YOU

We are grateful you chose KENWOOD for your land mobile

radio applications. We believe this easy-to-use transceiver

will provide dependable communications to keep personnel

operating at peak efficiency.

KENWOOD transceivers incorporate the latest in advanced

technology. As a result, we feel strongly that you will be

pleased with the quality and features of this product.

NOTICES TO THE USER

◆Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

◆Illegal operation is punishable by fine and/or imprisonment.

◆Refer service to qualified technicians only.

SAFETY: It is important that the operator is aware of and

understands hazards common to the operation of any

transceiver.

This device made under license under one or more of the

following US Patents: 4,590,473; 4,636,791; 4,716,407;

4,972,460; 5,148,482; 5,185,796; 5,271,017; 5,377,229;

5,502,767.

The IMBE™ voice coding Technology embodied in this

product is protected by intellectual property rights including

patent rights, copyrights, and trade secrets of Digital Voice

Systems, Inc. This voice coding Technology is licensed solely

for use within this Communications Equipment. The user of

this Technology is explicitly prohibited from attempting to

decompile, reverse engineer, or disassemble the Object

Code, or in any other way convert the Object Code into a

human-readable form.

One or more of the following statements may be applicable:

FCC WARNING

This equipment generates or uses radio frequency energy. Changes

or modifications to this equipment may cause harmful interference

unless the modifications are expressly approved in the instruction

manual. The user could lose the authority to operate this equipment

if an unauthorized change or modification is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY

THE FCC

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can generate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that the interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that

to which the receiver is connected.

•Consult the dealer for technical assistance.

The RBRC Recycle seal found on KENWOOD

nickel-cadmium (Ni-Cd) battery packs indicates

KENWOOD’s voluntary participation in an industry

program to collect and recycle Ni-Cd batteries after

their operating life has expired. The RBRC

program is an alternative to disposing Ni-Cd

batteries with your regular refuse or in municipal

waste streams, which is illegal in some areas.

For information on Ni-Cd battery recycling in your area, call (toll free)

1-800-8-BATTERY (1-800-822-8837).

KENWOOD’s involvement in this program is part of our commitment

to preserve our environment and conserve our natural resources.

The RBRC Recycle seal found on KENWOOD

nickel metal hydride (Ni-MH) battery packs

indicates KENWOOD’s voluntary participation in an

industry program to collect and recycle Ni-MH

batteries after their operating life has expired. The

RBRC program is an alternative to disposing Ni-MH

batteries with your regular refuse or in municipal

waste streams, which is illegal in some areas.

For information on Ni-MH battery recycling in your area, call (toll free)

1-800-8-BATTERY (1-800-822-8837).

KENWOOD’s involvement in this program is part of our commitment

to preserve our environment and conserve our natural resources.

The RBRC Recycle seal found on KENWOOD

lithium-ion (Li-ion) battery packs indicates

KENWOOD’s voluntary participation in an industry

program to collect and recycle Li-ion batteries after

their operating life has expired. The RBRC

program is an alternative to disposing Li-ion

batteries with your regular refuse or in municipal

waste streams, which is illegal in some areas.

For information on Li-ion battery recycling in your area, call (toll free)

1-800-8-BATTERY (1-800-822-8837).

KENWOOD’s involvement in this program is part of our commitment

to preserve our environment and conserve our natural resources.

iii

PRECAUTIONS

•Do not charge the transceiver and battery pack when they are

wet.

•Ensure that there are no metallic items located between the

transceiver and the battery pack.

•Do not use options not specified by KENWOOD.

•If the die-cast chassis or other transceiver part is damaged, do

not touch the damaged parts.

•If a headset or headphone is connected to the transceiver, reduce

the transceiver volume. Pay attention to the volume level when

turning the squelch off.

•Do not place the microphone cable around your neck while near

machinery that may catch the cable.

•Do not place the transceiver on unstable surfaces.

•Ensure that the end of the antenna does not touch your eyes.

•When the transceiver is used for transmission for many hours, the

radiator and chassis will become hot. Do not touch these

locations when replacing the battery pack.

•Do not immerse the transceiver in water.

•When water gets into the microphone opening or the speaker

grill, the voice level may become incoherent or distorted. Lightly

shake the transceiver to remove the water from the speaker and/

or microphone before operating the transceiver.

Turn the transceiver power off in the following locations:

•In explosive atmospheres (inflammable gas, dust particles,

metallic powders, grain powders, etc.).

•While taking on fuel or while parked at gasoline service stations.

•Near explosives or blasting sites.

•In aircrafts.

•In medical institutions or near persons using pacemakers.

•Do not disassemble or modify the transceiver for any reason.

•Do not place the transceiver on or near airbag equipment while

the vehicle is running. When the airbag inflates, the transceiver

may be ejected and strike the driver or passengers.

•Do not transmit while touching the antenna terminal or if any

metallic parts are exposed from the antenna covering.

Transmitting at such a time may result in a high-frequency burn.

•If an abnormal odor or smoke is detected coming from the

transceiver, switch the transceiver power off immediately, remove

the battery pack from the transceiver, and contact your

KENWOOD dealer.

•Use of the transceiver while you are driving may be against traffic

laws. Please check and observe the vehicle regulations in your

area.

•Do not expose the transceiver to extremely hot or cold

conditions.

CONTENTS

UNPACKING AND CHECKING EQUIPMENT .......................... 1

SUPPLIED ACCESSORIES ................................................ 1

PREPARATION .......................................................... 2

BATTERY PACK PRECAUTIONS ........................................... 2

INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK ................... 7

INSTALLING THE (OPTIONAL) ANTENNA ................................... 8

INSTALLING THE BELT CLIP .............................................. 8

INSTALLING THE CAP OVER THE UNIVERSAL CONNECTOR .................... 9

INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE OR HEADSET ......... 9

GETTING ACQUAINTED .............................................. 10

DISPLAY (K2 AND K3 MODELS ONLY) ................................ 13

PROGRAMMABLE FUNCTIONS ..................................... 15

BASIC OPERATIONS ................................................. 18

SWITCHING POWER ON/ OFF ........................................ 18

ADJUSTING THE VOLUME .............................................. 19

SELECTING AZONE AND CHANNEL ..................................... 19

TRANSMITTING ....................................................... 20

RECEIVING ........................................................... 22

SCAN .................................................................. 23

TEMPORARY CHANNEL LOCKOUT ....................................... 23

PRIORITY SCAN ...................................................... 24

SCAN REVERT ....................................................... 24

SCAN PROGRAMMING (K2 AND K3 MODELS ONLY) .................... 25

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION ........ 26

SELCALL (SELECTIVE CALLING) ........................................ 26

STATUS MESSAGE (K2 AND K3 MODELS ONLY) ........................ 27

SHORT MESSAGES ................................................... 29

LONG MESSAGES .................................................... 29

(CONTENTS CONTINUED…)

DTMF (DUAL TONE MULTI FREQUENCY) CALLS ................. 30

MAKING ADTMF CALL (K3 MODELS ONLY) .......................... 30

AUTODIAL (K2 AND K3 MODELS ONLY) ............................... 31

STUN CODE ......................................................... 31

EMERGENCY CALLS ................................................. 32

SCRAMBLER (FM)/ ENCRYPTION (APCO) ......................... 33

SECURE (ENCRYPTED) TRANSMISSION .................................. 33

SELECTING THE SCRAMBLER CODE ..................................... 33

SELECTING THE ENCRYPTION KEY ...................................... 34

DELETING THE ENCRYPTION KEY (K2 AND K3 MODELS ONLY) ........... 34

PASSWORD PROTECTION (K2 AND K3 MODELS ONLY) .................. 34

SIGNALING ............................................................ 35

QUIET TALK (QT)/ DIGITAL QUIET TALK (DQT) ....................... 35

OPTIONAL SIGNALING ................................................. 36

VOICE OPERATED TRANSMISSION (VOX) ......................... 37

VOX GAIN LEVEL .................................................... 37

VOX OPERATION .................................................... 38

CLOCK (K2 and K3 Models Only) ................................... 39

CLOCK ADJUSTMENT .................................................. 39

ADVANCED OPERATIONS ............................................ 40

BACKGROUND OPERATIONS ....................................... 49

TIME-OUT TIMER (TOT) ............................................. 49

BATTERY SAVER ...................................................... 49

LOW BATTERY WARNING ............................................. 50

COMPANDER ......................................................... 50

PTT ID ............................................................. 51

BUSY CHANNEL LOCKOUT (BCL) ..................................... 51

UNPACKING AND CHECKING EQUIPMENT

Note: The following unpacking instructions are for use by your

KENWOOD dealer, an authorized KENWOOD service facility, or the

factory.

Carefully unpack the transceiver. We recommend that you

identify the items listed in the following table before discarding

the packing material. If any items are missing or have been

damaged during shipment, file a claim with the carrier

immediately.

SUPPLIED ACCESSORIES

Belt clip + screws Universal

connector cap

metI rebmuNtraP ytitnauQ

pilctleBXX-0170-92J1

•pilctlebrofswercSXX-8003-03N2

pacrotcennoclarevinUXX-2860-90B1

•wercsgnisserD

)delbmessaerp( XX-1350-80N1

•laesrebbuR

)delbmessaerp( XX-0434-11G1

dracecnereferkciuQXX-3932-95B1

launamnoitcurtsnIXX-6971-26B1

PREPARATION

BATTERY PACK PRECAUTIONS

Do not use battery packs or battery chargers not

recommended by KENWOOD.

◆Do not recharge the battery pack if it is already fully charged.

Doing so may cause the life of the battery pack to shorten or the

battery pack may be damaged.

◆After charging the battery pack, disconnect it from the charger. If

the charger power is reset (turned ON after being turned OFF),

recharging will start again and the battery pack will become

overcharged.

◆Do not use the transceiver while charging the battery pack. We

recommend you switch the transceiver power OFF while

charging is taking place.

◆Do not charge the battery pack when the battery pack or

transceiver is wet, to avoid the risk of fire or damage. Wipe the

water from the battery pack or transceiver using a dry cloth

before charging.

◆Do not short the battery terminals or dispose of the battery by

fire.

◆Never attempt to remove the casing from the battery pack.

■Charging the Battery Pack

For charging procedures, refer to the battery charger

Instruction Manual.

Autres manuels pour TK-5210

Table des matières

Autres manuels Kenwood Émetteur-récepteur

Kenwood

Kenwood TK-5210 Manuel du propriétaire

Kenwood

Kenwood TK-290 Manuel utilisateur

Kenwood

Kenwood TK-7108H Manuel utilisateur

Kenwood

Kenwood Nexedge Manuel utilisateur

Kenwood

Kenwood TR 7800 Manuel utilisateur

Kenwood

Kenwood TM-251A Manuel utilisateur

Kenwood

Kenwood TS-440S Manuel utilisateur

Kenwood

Kenwood TK-630H Manuel utilisateur

Kenwood

Kenwood TS-870S Manuel utilisateur

Kenwood

Kenwood TK-2140 Manuel utilisateur

Kenwood

Kenwood TS-990S Manuel utilisateur

Kenwood

Kenwood TK-390 Manuel utilisateur

Kenwood

Kenwood TH-D7A(G) Manuel utilisateur

Kenwood

Kenwood TK-868GD Manuel utilisateur

Kenwood

Kenwood TM-451E Manuel utilisateur

Kenwood

Kenwood TK-8302 Manuel utilisateur

Kenwood

Kenwood TM-742A/E Manuel utilisateur

Kenwood

Kenwood TK-2170 SERIES Manuel utilisateur

Kenwood

Kenwood TK-768 Manuel utilisateur

Kenwood

Kenwood TS-450S Manuel utilisateur

Kenwood

Kenwood TH-235A Manuel utilisateur

Kenwood

Kenwood Nexedge NX-5400 Manuel utilisateur

Kenwood

Kenwood TM-221A Manuel utilisateur

Kenwood

Kenwood TR-9000 Manuel utilisateur

Manuels Émetteur-récepteur populaires d'autres marques

Yaesu

Yaesu FT-7B Manuel utilisateur

Texas Instruments

Texas Instruments TLK10232 Manuel utilisateur

Mizuho

Mizuho MX-2 Guide produit

Blitz

Blitz MJ-398U Manuel utilisateur

Utilicom

Utilicom LongRanger 2050 Manuel utilisateur

Standart

Standart HX290UKA Manuel utilisateur

Altronix

Altronix Pace1PTM Manuel utilisateur

Kirisun

Kirisun PT2208 Manuel utilisateur

ELECRAFT

ELECRAFT KX2 Manuel utilisateur

Zodiac

Zodiac K3 Manuel utilisateur

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuel utilisateur

Siemens

Siemens PSO 4000 Manuel utilisateur

Midland

Midland G8E-BT Manuel

ComNav

ComNav Mariner X2 Manuel utilisateur

Uniden

Uniden UH820 Series Manuel utilisateur

Standard Horizon

Standard Horizon HX320E Manuel utilisateur

Em-Trak

Em-Trak A100 Manuel utilisateur

HPE

HPE Aruba QSFP28 Manuel utilisateur