Kenwood NX-5200E Manuel utilisateur

USER GUIDE

GUIDE DE L'UTILISATEUR

GUIA DEL USUARIO

GUIDA PER L'UTENTE

BENUTZERHANDBUCH

GEBRUIKERSHANDLEIDING

KULLANICI REHBERI

ΟΔΗΓΟΣ ΧΡΗΣΤΗ

GUIA DO UTILIZADOR

NX-5000 series

B5A-0940-10 (E)

Importeur

Amsterdamseweg 37, 1422 AC Uithoorn, Nederland

Importer

12 Priestley Way, London NW2 7BA, United Kingdom

Importeur

Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, Deutschland

Importador

Carretera de Rubi, 88 Planta 1A, 08174 Sant Cugat delVallès Barcelona, España

Importateur

7 Allee des Barbanniers 92230 Gennevilliers, France

Importatore

Via G. Sirtori 7/9, 20129 Milano, Italia

Importeur

Leuvensesteenweg 248J, 1800 Vilvoorde, België

Authorised Representative in Europe

Amsterdamseweg 37, 1422 AC Uithoorn, Nederland

Manufacturer

3-12 Moriyacho, Kanagawa-ku,Yokohama-shi, Kanagawa, 221-0022, JAPAN

USER GUIDE

This User Guide covers only the basic

operations of your radio.Ask your dealer for

information on anycustomized features they

may have added to your radio.For using

details User Manual, refer to the following URL.

http://manual.kenwood.com/en_contents/search/keyword

NOTIFICATION

This equipment complies with the essential requirements of

Directive 2014/53/EU.

This equipment requires a licence and is intended for use in the

countries as below.

AT BE DK FI FR DE GR IS IE IT LI LU

NL NO PT ES SE CH GB CY CZ EE HU LV

LT MT PL SK SI BG RO HR TR

ISO3166

VHF DIGITAL TRANSCEIVER

NX-5200

UHF DIGITAL TRANSCEIVER

NX-5300

THANKYOU

We are grateful you have chosen KENWOOD for your Digital

Transceiver applications.

CONTENTS

NOTICES TO THE USER.................................................. 3

PRECAUTIONS............................................................ 5

UNPACKING AND CHECKING EQUIPMENT...........................12

SUPPLIED ACCESSORIES........................................................................12

PREPARATION ...........................................................13

INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK ...................13

INSTALLING THE (OPTIONAL) ANTENNA ................................................14

INSTALLING THE BELT CLIP .................................................................... 14

INSTALLING THE CAP OVER THE UNIVERSAL CONNECTOR................... 15

INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE OR HEADSET..15

INSTALLING THE microSD MEMORY CARD ............................................16

ORIENTATION ............................................................17

KEYS AND CONTROLS.............................................................................17

DISPLAY ..................................................................................................20

BASIC OPERATIONS .................................................... 23

SWITCHING POWER ON/ OFF..................................................................23

ADJUSTING THE VOLUME.......................................................................23

SELECTING A ZONE AND CHANNEL ........................................................23

TRANSMITTING .......................................................................................24

RECEIVING...............................................................................................24

INFORMATION ON SOFTWARE LICENSE.............................25

NOTICES TO THE USER

•Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

•Illegal operation is punishable by ﬁne and/or imprisonment.

•Refer service to qualiﬁed technicians only.

Safety: It is important that the operator is aware of and

understands hazards common to the operation of any transceiver.

Information on Disposal of Old Electrical and Electronic Equipment and Batteries

(applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be

disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled at

a facility capable of handling these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest

to you.

Proper recycling and waste disposal will help conserve resources whilst

preventing detrimental effects on our health and the environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this

battery contains lead.

The AMBE+2TM voice codingTechnology embodied in this product

is protected by intellectual property rights including patent rights,

copyrights and trade secrets of DigitalVoice Systems, Inc. This voice

coding Technology is licensed solely for use within this Communications

Equipment. The user of this Technology is explicitly prohibited

from attempting to extract, remove, decompile, reverse engineer, or

disassemble the Object Code, or in any other way convert the Object

Code into a human-readable form.U.S.Patent Nos. #8,315,860,

#8,595,002, #6,199,037, #6,912,495, #8,200,497, #7,970,606, and

#8,359,197.

Trademarks

SD™ and microSD™ are trademarks of SD-3C, LLC in the United States and/or

other countries.

The Bluetooth®word mark and logo are registered trademarks owned by the

Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation

is under license.Other trademarks and trade names are those of their respective

owners.

Firmware Copyrights

The title to and ownership of copyrights for ﬁrmware embedded in KENWOOD

product memories are reserved for JVC KENWOOD Corporation.

PRECAUTIONS

• Do not charge the transceiver and battery pack when they are wet.

• Ensure that there are no metallic items located between the

transceiver and the battery pack.

• Do not use options not speciﬁed by KENWOOD.

• If the die-cast chassis or other transceiver part is damaged, do not

touch the damaged parts.

• If a headset or headphone is connected to the transceiver, reduce

the transceiver volume. Pay attention to the volume level when

turning the squelch off.

• Do not place the microphone cable around your neck while near

machinery that may catch the cable.

• Do not place the transceiver on unstable surfaces.

• Ensure that the end of the antenna does not touch your eyes.

• When the transceiver is used for transmission for many hours, the

radiator and chassis will become hot. Do not touch these locations

when replacing the battery pack.

• Always switch the transceiver power off before installing optional

accessories.

• The charger is the device that disconnects the unit from the AC

mains line.The AC plug should be readily accessible.

Turn the transceiver power off in the following locations:

• Near explosives or blasting sites.

• In aircrafts. (Any use of the transceiver must follow the

instructions and regulations provided by the airline crew.)

• Where restrictions or warnings are posted regarding the use of

radio devices, including but not limited to medical facilities.

• Near persons wearing pacemakers.

• In explosive atmospheres (inﬂammable gas, dust particles,

metallic powders, grain powders, etc.).

• While taking on fuel or while parked at gasoline service stations.

• Do not remove the black sheet from the reverse side of the

transceiver (refer to the illustration below). Removal of this

sheet decreases the waterproof efﬁciency of the transceiver and

may cause malfunctions if water seeps into the transceiver.

• The orange seal on the reverse side of the transceiver is

important with respect to the waterproof efﬁciency of the

transceiver.Do not place stickers or other materials on or

around the seal shown in the ﬁgure, or on the reverse side of

the battery pack. Doing so will impair the waterproof efﬁciency

of the transceiver and may cause it to break down.Additionally,

in order to prevent damage to the seal, do not allow it to come in

contact with foreign materials.

• Do not disassemble or modify the transceiver for any reason.

• Do not place the transceiver on or near airbag equipment while

the vehicle is running. When the airbag inﬂates, the transceiver

may be ejected and strike the driver or passengers.

• Do not transmit while touching the antenna terminal or if

any metallic parts are exposed from the antenna covering.

Transmitting at such a time may result in a high-frequency burn.

• If an abnormal odor or smoke is detected coming from the

transceiver, switch the transceiver power off immediately,

remove the battery pack from the transceiver, and contact your

KENWOOD dealer.

• Use of the transceiver while you are driving may be against

trafﬁc laws. Please check and observe the vehicle regulations

in your area.

• Do not expose the transceiver to extremely hot or cold

conditions.

• Do not carry the battery pack (or battery case) with metal

objects, as they may short the battery terminals.

• Danger of explosion if the battery is incorrectly replaced;

replace only with the same type.

• When attaching a commercial strap to the transceiver,

ensure that the strap is durable. In addition, do not swing the

transceiver around by the strap; you may inadvertently strike

and injure another person with the transceiver.

• If a commercially available neck strap is used, take care not to

let the strap get caught on nearby machine.

• When operating the transceiver in areas where the air is dry, it is

easy to build up an electric charge (static electricity).

When using an earphone accessory in such conditions, it is

possible for the transceiver to send an electric shock through

the earphone and to your ear.We recommend you use only

a speaker/microphone in these conditions, to avoid electric

shocks.

Information concerning the battery pack:

The battery pack includes ﬂammable objects such as organic solvent.

Mishandling may cause the battery to rupture producing ﬂames or

extreme heat, deteriorate, or cause other forms of damage to the

battery. Please observe the following prohibitive matters.

•Do not disassemble or reconstruct battery!

The battery pack has a safety function and protection circuit to

avoid danger. If they suffer serious damage, the battery may

generate heat or smoke, rupture, or burst into ﬂame.

•Do not short-circuit the battery!

Do not join the + and – terminals using any form of metal (such

as a paper clip or wire). Do not carry or store the battery pack

in containers holding metal objects (such as wires, chain-

necklace or hairpins). If the battery pack is short-circuited,

excessive current will ﬂow and the battery may generate heat

or smoke, rupture, or burst into ﬂame. It will also cause metal

objects to heat up.

•Do not incinerate or apply heat to the battery!

If the insulator is melted, the gas release vent or safety function

is damaged, or the electrolyte is ignited, the battery may

generate heat or smoke, rupture, or burst into ﬂame.

•Do not leave the battery near ﬁres, stoves, or other heat

generators (areas reaching over 80°C/ 176°F)!

If the polymer separator is melted due to high temperature,

an internal short-circuit may occur in the individual cells and

the battery may generate heat or smoke, rupture, or burst into

ﬂame.

•Avoid immersing the battery in water or getting it wet by

other means!

If the battery becomes wet, wipe it off with a dry towel before

use. If the battery’s protection circuit is damaged, the battery

may charge at extreme current (or voltage) and an abnormal

chemical reaction may occur. The battery may generate heat or

smoke, rupture, or burst into ﬂame.

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Kenwood Émetteur-récepteur

Kenwood

Kenwood TK-8108H Manuel utilisateur

Kenwood

Kenwood TK-8102 Manuel utilisateur

Kenwood

Kenwood TM-231A Manuel utilisateur

Kenwood

Kenwood TM-211A/E Manuel utilisateur

Kenwood

Kenwood TK-3360 Manuel utilisateur

Kenwood

Kenwood TH-D75A Manuel utilisateur

Kenwood

Kenwood TS-440S Manuel utilisateur

Kenwood

Kenwood TK-D740 Manuel utilisateur

Kenwood

Kenwood TM-733A Manuel utilisateur

Kenwood

Kenwood TH-22A Manuel utilisateur

Kenwood

Kenwood TS-520S Manuel utilisateur

Kenwood

Kenwood TK-5210 Manuel utilisateur

Kenwood

Kenwood TR-7950 Manuel utilisateur

Kenwood

Kenwood ProTalk tk-3501 Manuel utilisateur

Kenwood

Kenwood TK-3170 Manuel utilisateur

Kenwood

Kenwood TS-670 Manuel utilisateur

Kenwood

Kenwood TH-75A Manuel utilisateur

Kenwood

Kenwood TS-711A Manuel utilisateur

Kenwood

Kenwood TH-415A Manuel utilisateur

Kenwood

Kenwood TK-7102H Manuel utilisateur

Kenwood

Kenwood TK-2217 Manuel utilisateur

Kenwood

Kenwood TS-990S Manuel

Kenwood

Kenwood TK-378G Manuel utilisateur

Kenwood

Kenwood TW-4100A Manuel utilisateur

Manuels Émetteur-récepteur populaires d'autres marques

Yaesu

Yaesu FT-7B Manuel utilisateur

Texas Instruments

Texas Instruments TLK10232 Manuel utilisateur

Mizuho

Mizuho MX-2 Guide produit

Blitz

Blitz MJ-398U Manuel utilisateur

Utilicom

Utilicom LongRanger 2050 Manuel utilisateur

Standart

Standart HX290UKA Manuel utilisateur

Altronix

Altronix Pace1PTM Manuel utilisateur

Kirisun

Kirisun PT2208 Manuel utilisateur

ELECRAFT

ELECRAFT KX2 Manuel utilisateur

Zodiac

Zodiac K3 Manuel utilisateur

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuel utilisateur

Siemens

Siemens PSO 4000 Manuel utilisateur

Midland

Midland G8E-BT Manuel

ComNav

ComNav Mariner X2 Manuel utilisateur

Uniden

Uniden UH820 Series Manuel utilisateur

Standard Horizon

Standard Horizon HX320E Manuel utilisateur

Em-Trak

Em-Trak A100 Manuel utilisateur

HPE

HPE Aruba QSFP28 Manuel utilisateur