Kenwood WD-K10 Series Manuel utilisateur

WD-K10 series

DECT Intercom System

USER MANUAL

B5A-1775-00

1INTRODUCTION

1.1 Contents

1 INTRODUCTION 1

1.1 Contents 1

1.2 How to Read This USER MANUAL 3

Symbols Used 3

Content of This User Manual 3

1.3 Features 4

1.4 Precautions 5

1.5 Dust Resistant/Water Resistant and

Environment of Use 5

1.6 Precautions for Proper Use 6

1.7 System Configuration 7

System Configuration Diagram 7

System Configuration Table 8

System Type 9

1.8 Part Names and Functions (Device

Connection Method) 12

Portable Base WD-K10PBS/Transceiver

WD-K10TR 12

Base Station WD-K10BS 15

Charger KSC-48CR 20

Clip Microphone with Earphone EMC-13 21

Clip Microphone with Earphone EMC-14 22

Headset KHS-37 23

Interface Cable WD-RC50 24

Interface Cable WD-RC100 25

2 PREPARATION 26

2.1 Preparing the Device 26

Replacing the Battery Pack 26

Charging the Battery Pack 28

Attaching the Belt Clip 29

Connecting the Clip Microphone 29

Connecting the Transceiver Connection

Cable 30

2.2 Turning On/Off the Device Power 32

Turning On/Off the Power of WD-K10BS 32

Turning On/Off the Power of WD-

K10PBS / WD-K10TR 33

2.3 Registering the Device 34

Registering Sub Unit to Base Unit 34

Starting WD-K10PBS in Transceiver

Mode 38

2.4 Setting Various Functions 39

Adjusting the Receiver Volume Level 39

Checking Battery Remaining Capacity 40

Configuring in Setup Menu Mode 41

Setting Key Lock On/Off 43

Changing the PTT Key Setting 44

Manual Reconnection (Transceiver

Mode Only) 45

Notification Tones During the Use of

Transceiver 46

Voice Announcement 47

3 MAKING A CALL 48

3.1 Operation Mode 48

3.2 Making Calls (Group Call Mode) 49

When Out of Range 50

3.3 Changing Groups 51

3.4 Calling All Groups (All Call Mode) 52

3.5 Using External Devices 53

3.6 Performing PMR Link 54

Overview of PMR Link 54

Activating the PMR Link Function 55

Performing PMR Link by Pressing the

[PMR Link] Key 56

Performing PMR Link by Pressing the

[PTT] Key 57

Performing PMR Link by Pressing the

[PMR Link (PTT Link)] Key 58

3.7 Making Calls in High Audio Quality 59

Overview of High Audio Quality Mode 59

3.8 Broadcasting 60

Activating the Broadcast Function 60

Broadcasting by Pressing the

[Broadcast] Key 61

Broadcasting by Pressing the [PTT] Key 62

Broadcasting by Pressing the

[Broadcast(PTT Link)] Key 63

4 USING LISTENING MODE 64

4.1 Listening Mode 64

Overview of Listening Mode 64

Limitations of Listening Mode 65

Display in Listening Mode 65

4.2 Calling from Sub Units in Listening Mode

(Listening Talk) 66

4.3 Calling from Sub Units in Listening Mode

(All Call Mode) 66

4.4 Changing Groups 67

4.5 Switching to Group Call Mode 68

Contents

5 OTHERS 69

5.1 Troubleshooting 69

5.2 Specifications 71

1 INTRODUCTION

1.1 Contents

Contents

1.2 How to Read This USER MANUAL

Symbols Used

Precautions

Describes precautions concerning the operation of this product.

Note

Describes reference information, such as functions and usage restrictions of this product.

Content of This User Manual

0All rights reserved by JVC KENWOOD Corporation. Unauthorized duplication or reprinting of this user manual, in whole

or in part, is strictly prohibited.

0Other product and company names included in this user manual are trademarks and/or registered trademarks of their

respective companies. Marks such as ™ and ® have been omitted in this user manual.

0Illustrated designs, specifications and other contents of this user manual are subject to change for improvement without

prior notice.

0Portable Base WD-K10PBS (Base Station Mode) and Base Station WD-K10BS may be denoted as “base unit”; and

Portable Base WK-K10PBS (Transceiver Mode) and Transceiver WD-K10TR may be denoted as “sub unit” in this manual.

1 INTRODUCTION

1.2 How to Read This USER MANUAL

Contents

1.3 Features

0The use of 1.9 GHz band digital communication technology allows for crisp and clear calls to be made in confidentiality.

0Licenses and application procedures are not required; the device can be used immediately on the day it was set up.

0A flexible system can be set up, from a small-scale system using one Portable base WD-K10PBS or Base Station WD-

K10BS, to a large-scale system combining several base stations.

0Up to 10 sub units can be connected to a base station (base unit) at Normal Audio Quality, and up to 5 sub units can be

connected at High Audio Quality.

*The default Quality Mode during calls is Normal Audio Quality. However, for clearer and crispier calls, you can select

High Audio Quality.

*Similar for 2 or more base stations in a baselink system.

0Simultaneous bidirectional calls are possible.

0The operation and usage environment of a sub unit may be limited when using it in Listening Mode configured for dedicated

receiving. However, more sub units can be operated with few base stations.

0Press the [PTT] key on the transceiver to call immediately at any time, without any complicated operations.

0Group calls can be made for up to 4 groups, according to different hierarchy and business use. You can contact all

members of the group simultaneously or talk with other groups even in Grouping operation.

0Use a clip microphone for clearer calls with less noise even under a noisy environment.

0This system allows external audio signals to be input to intercom calls, and intercom calls to be output to audio signal

monitor.

0The Portable base WD-K10PBS can be used continuously for 25 hours in the Transceiver Mode, and for 8 hours in the

Base Station Mode (when 4 transceivers are connected).

0The Transceiver WD-K10TR can be used continuously for 20 hours.

1 INTRODUCTION

1.3 Features

Contents

1.4 Precautions

0As far as possible, use the transceiver and portable base at a distance away from external wireless systems.

An error due to radio wave interference may occur if they are too near.

0Using earphones in a dry environment may cause tingling sensation in the ears. This is due to the static charges

accumulated on the body and the connected device, not malfunctioning of the earphones. This is less likely to occur on

someone wearing clothes made from natural materials or preventive actions taken to prevent the accumulation of static

charges on the clothes.

1.5 Dust Resistant/Water Resistant and Environment of Use

0The Portable base/Transceiver has been tested in-house and verified of its IP67 dust resistant/water resistant

performance at the design phase. However, the dust resistant/water resistant performance is not guaranteed for all

situations in actual use.

*IP67 (Dust resistant/water resistant):

No detrimental effects on device after submerging device in fresh water/still water of 1 m deep without additional non-

specified pressure and retrieving it 30 minutes later.

0Under normal usage, the device can maintain its IP67 dust resistant/water resistant performance for one year. (When

terminal cover, battery cover is installed)

*We do not have a special maintenance program to maintain the dust resistant/water resistant performance.

0Align the terminal cover and battery cover to the attaching position before securing. When attaching the covers, ensure

that no fine foreign material (including fiber, hair and sand) is caught in between.

0Do not open or close the terminal cover or battery cover when the transceiver is wet.

0If the supplied microphone plug mounting bracket is used when connecting the specified option to the speaker/microphone

terminal, the transceiver meets the IP67 dust resistant/water resistant specifications. The dust resistant/water resistant

performance of the option varies with each optional product.

If an option other than the above is connected, the transceiver is not dust resistant/water resistant.

0The supplied charger and AC adapter is not water resistant. Do not use the transceiver when it is wet.

0If an impact is exerted on the transceiver, it may affect its dust resistant/water resistant performance.

0Using the transceiver near electronic products such as TVs, radios, and PCs may subject it to radio frequency interference

or cause radio frequency interference to other devices. Use the transceiver away from these devices.

0Do not subject the transceiver or submerge it in soapy water, detergents, seasonings, juice, salt water, or oil. Do not

submerge or subject the transceiver to hot or cold water.

1 INTRODUCTION

1.4 Precautions

Contents

1.6 Precautions for Proper Use

Portable base/Transceiver

0Do not drop or knock these devices. These are precision equipment that may malfunction if subject to strong impact.

Clip Microphone with Earphone, Headset

0Do not use a non-compatible clip microphone with earphone, headset. This may cause malfunction.

0When pulling off the clip microphone, earphone, or headset microphone adapter, do not pull the cable. This may cause

the cable to snap. Be sure to hold the plug and pull.

0Do not touch the metal part of the plug. This may cause poor contact. If the device is dirty, wipe with a dry clean cloth.

0When connecting the clip microphone with earphone or headset, be sure to turn off the power of the sub unit. Making a

connection while the device is turned on activates the protector which disables operation on the sub unit. The clip

microphone with earphone or headset is also disabled.

0Insert the plug of the clip microphone with earphone straight in.

System

0As this DECT intercom system uses wireless communication, noise may occur and calls may be cut off if the system is

moved to a place unreachable by radio waves.

0The call distance differs for a Portable base WD-K10PBS and Transceiver WD-K10TR.

And the communication distance differs depending on the usage environment and conditions.

For details, please consult the authorized dealer.

0Do not place the device near heating appliances or at locations subject to direct sunlight for long hours.

0When howling (audio feedback) occurs, adjust the speaker volume or change the direction and position of the microphone.

0The number of units that can be connected may be fewer depending on the radio wave environment and setup condition.

Portable base/Transceiver Battery (Rechargeable Battery)

0Do not place the battery at locations subject to high temperature (such as direct sunlight). This will cause leaking or

shorten the lifespan.

0The guideline for the number of battery recharging times is as follows.

Model Recharging Times

Portable base WD-K10PBS Approx. 500 times

Transceiver WD-K10TR Approx. 500 times

0As the number of recharging times may change drastically depending on the usage temperature, usage time, and

remaining capacity at the time of recharging, this guideline is not a guarantee.

0If the usage time has shortened sharply even when the number of recharging times is less than the guideline, the battery

is considered to have reached the end of life. Please buy a new one.

Daily Maintenance

Turn off the power first, then remove the battery or power plug. Perform the following maintenance.

0If the device is dirty, wipe with a dry and soft cloth.

0If the device is extremely dirty, wet the cloth in diluted neutral detergent solution and squeeze dry before wiping off the

dirt. Wipe again with a dry cloth to remove any excess moisture.

Precautions

0Do not use benzene or thinner. This may cause damage or malfunction in the body.

1 INTRODUCTION

1.6 Precautions for Proper Use

Contents

1.7 System Configuration

System Configuration Diagram

PTT

Clip Microphone with

Earphone EMC-13

Interface Cable

WD-RC50

Interface Cable

WD-RC100

Base Station

WD-K10BS

PC for System Setup

Portable Base

WD-K10PBS

Transceiver

WD-K10TR

Charger

KSC-48CR

Battery Pack

WD-UB110

WD-UB100

AC Adapter

KSC-44SL

Headset

KHS-37

Clip Microphone with

Earphone EMC-14

1 INTRODUCTION

1.7 System Configuration

Contents

System Configuration Table

No. Model Name Product Name Remarks

1 WD-K10PBS Portable Base It is a transceiver for wireless communication as a base unit or sub

unit of the DECT intercom system.

2 WD-K10TR Transceiver It is a transceiver that is the sub unit of the DECT intercom system. It

communicates wirelessly with the Portable Base or Base Station.

3 WD-K10BS Base Station It communicates with the transceiver.

4 KSC-48CR Charger A charger for the Portable Base WD-K10PBS/Transceiver WD-

K10TR.

5 KSC-44SL AC Adapter An AC adapter for the charger.

6 WD-UB110 Battery Pack A battery pack for the Portable Base WD-K10PBS.

7 WD-UB100 Battery Pack A battery pack for the Transceiver WD-K10TR.

8 EMC-13 Clip Microphone with

Earphone

A clip microphone that is equipped with earphone.

9 EMC-14 Clip Microphone with

Earphone

A clip microphone that is equipped with earphone.

10 KHS-37 Headset A headset for the Portable Base WD-K10PBS/Transceiver WD-

K10TR.

11 WD-RC100 Interface Cable

(Universal type)

A conversion cable for the Portable base WD-K10PBS.

It is used when performing the PMR Link function.

12 WD-RC50 Interface Cable (2-Pin type) A conversion cable for the Portable base WD-K10PBS.

It is used when performing the PMR Link function.

1 INTRODUCTION

1.7 System Configuration

Contents

System Type

This product is a DECT intercom system that combines and uses both base and sub units.

The system may be of a portable or non-portable type, depending on the type of base unit.

Note

0The base and sub units have already been configured for your system when you receive the transceiver. For details

on system configuration and setup, please consult the authorized dealer or installer.

Portable Type

0Stand-alone

One Portable Base WD-K10PBS is operated as a base unit.

Up to 10 sub units can be connected at Normal Audio Quality using the Portable Base WD-K10PBS (Transceiver Mode) or

the Transceiver WD-K10TR. Up to 5 sub units can be connected at High Audio Quality (including the base unit, maximum

11 units (or 6 units at High Audio Quality) can be used for simultaneous calls).

PTT

Blinking orange

WD-K10TR

Blinking green

WD-K10PBS

(Transceiver

Mode)

WD-K10PBS

(Base Station Mode)

Note

0To operate the Portable base as a sub unit, the mode on WD-K10PBS must be switched ( on page 38).

0You can use the system setup to change the quality mode from Normal Audio Quality to High Audio Quality for clearer

and crispier calls. For details on the settings, please consult the authorized dealer or installer.

1 INTRODUCTION

1.7 System Configuration

Contents

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kenwood Système d'interphone

Kenwood

Kenwood WD-K10PBS Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur