Kenwood KCA-WL100 Instructions de montage

KCA-WL100 Firmware Update Guide

Introduction

• This guide describes precautions and procedure for updating

the KCA-WL100 firmware.

• To update the firmware, Wi-Fi Access Point (AP) connected to

the Internet is necessary.

• If an error occurs while updating, KCA-WL100 may not work

correctly. Be sure to read precautions and procedure carefully.

Precautions

• Park the vehicle in a safe place before updating. To prevent the

battery from running out, keep the engine running.

• Do not turn off the power of KCA-WL100 and the Wi-Fi AP while

downloading the firmware. If the firmware is not downloaded

successfully, the error message appears. In this case, retry from

Step 1.

• Do not turn off the power of KCA-WL100 while updating. If the

firmware is not updated successfully, KCA-WL100 may not work

correctly.

Target Firmware Version

This updater is for Version 3.21.24* or later.

After updating, it will become Version 3.21.25*. (*: W or K)

To check the firmware version, see “Check Firmware Version” in

Step 3.

Work Flow

Step 1. Connect KCA-WL100 to Wi-Fi AP.

Step 2. Update Firmware

Step 3. Check Firmware Version.

Step1. Connect KCA-WL100 to Wi-Fi AP

Prepare Wi-Fi AP and conrm Service Set Identier (SSID) and pass-

word.

1. Turn on the unit that KCA-WL100 is connected to, and select

HDMI as input source.

2. Switch the connection mode to “Wireless Link”

3. Operate the Android device to connect with “KCA-WL100_

XXXXX ” via Wi-Fi.

4. Open the browser on the Android device and access

<http://192.168.49.1>.

- Setting screen appears.

5. Touch .

- Access point search screen appears.

6. Touch “Scan”.

- AP SSID list appears.

7. Select an AP SSID to connect.

- AP menu screen appears.

8. Enter the password if required and touch “Connect”.

When connection is made...

–On the Android device, the selected AP SSID is shown in

“Saved Access Points” and “Connecting” appears.

- On the unit, “Connected to XXX” is shown.

1711_ KCA-WL100_FWupdate_en

Step2. Update Firmware

1. Touch “Back” repeatedly until you get the setting screen.

- If you cannot get the setting screen, retry 3 and 4 in Step1.

2. Touch “Submit” in “Firmware Update”,and then touch “OK”

on the confirmation screen.

3. The firmware will be updated automatically as follows:

- Downloading firmware. It takes about 30 to 60 seconds

depending on the Wi-Fi condition.

- Updating firmware. It takes about 120 seconds.

- Re-booting the unit.

Downloading version

Progress of download

Current version

Updating version

Progress of updating

After updating is nished, the

unit will be re-booted

automatically.

Step3. Check Firmware Version

1. Perform 1 to 3 of Step1 to display the setting screen.

2. Check the firmware version.

KCA-WL100 Firmware Update Guide

Autres manuels pour KCA-WL100

Autres manuels Kenwood Système stéréo de voiture

Kenwood

Kenwood DPX794BH Manuel utilisateur

Kenwood

Kenwood KDC-5047U Manuel utilisateur

Kenwood

Kenwood DPX-5200BT Manuel utilisateur

Kenwood

Kenwood KDV-5241U Mode d’emploi

Kenwood

Kenwood KDC-MP628 Manuel utilisateur

Kenwood

Kenwood Car Entertainment System Manuel utilisateur

Kenwood

Kenwood KRC-31Y Manuel utilisateur

Kenwood

Kenwood KDC-BT730DAB Manuel utilisateur

Kenwood

Kenwood KDC-105 Manuel utilisateur

Kenwood

Kenwood KDC-5019 Manuel utilisateur

Kenwood

Kenwood KCH-19 Manuel utilisateur

Kenwood

Kenwood KDC-8023 Manuel utilisateur

Kenwood

Kenwood KHD-CX910 Manuel utilisateur

Kenwood

Kenwood KDC-208U Manuel utilisateur

Kenwood

Kenwood KDC-719 Manuel utilisateur

Kenwood

Kenwood KCA-S220A - Car Audio Switcher Manuel utilisateur

Kenwood

Kenwood FleetSync KDS-100 Manuel technique

Kenwood

Kenwood SIRIUS KPA-H2C Manuel utilisateur

Kenwood

Kenwood KDC-MPV7019 Manuel utilisateur

Kenwood

Kenwood KMM-123Y Manuel utilisateur

Kenwood

Kenwood KDC-MP8029 Manuel utilisateur

Kenwood

Kenwood KDC-MP632U - USB/AAC/WMA/MP3/CD Receiver With External Media... Manuel utilisateur

Kenwood

Kenwood KDC-BT268U Manuel utilisateur

Kenwood

Kenwood GX806EF2 Manuel utilisateur

Manuels Système stéréo de voiture populaires d'autres marques

JL Audio

JL Audio Stealthbox SB-CAN-G2MVX3D/10TW3 Manuel utilisateur

Clarion

Clarion PU-9836A Manuel utilisateur

Sony

Sony MEX-BT5750U Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric AR0M Manuel utilisateur

Sony

Sony RM-X7BT Manuel utilisateur

Insignia

Insignia NS-HD5113 Manuel utilisateur

Clarion

Clarion BTD3341 Manuel utilisateur

USA SPECS

USA SPECS PA11-VW6 Manuel utilisateur

Sony

Sony MEX-N4380BT Manuel utilisateur

JVC

JVC KD-DB912BT Manuel utilisateur

Philips

Philips CSQ405/98 Manuel utilisateur

Alpine

Alpine TDM-7544 Manuel utilisateur

Autotek

Autotek TransAm TA 1400 Manuel utilisateur

Clarion

Clarion PN-3124N-A Manuel utilisateur

Denso TEN

Denso TEN FT0108A Manuel utilisateur

Pyle

Pyle PLD57MU Manuel utilisateur

Harman

Harman Chrysler Radio Navigation System RB4 Manuel utilisateur

Clarion

Clarion VS735 Manuel utilisateur